[v2,1/1] test:linux-generic: add process mode tests

diff --git a/test/linux-generic/performance/Makefile.am b/test/linux-generic/performance/Makefile.am
index cb72fce..d590acd 100644
--- a/test/linux-generic/performance/Makefile.am
+++ b/test/linux-generic/performance/Makefile.am
@@ -2,7 +2,10 @@  include $(top_srcdir)/test/Makefile.inc
 
 TESTS_ENVIRONMENT += TEST_DIR=${builddir}
 
-TESTSCRIPTS = odp_scheduling_run_proc.sh
+TESTSCRIPTS = odp_crypto_run_proc.sh \
+	      odp_l2fwd_run_proc.sh \
+	      odp_pktio_perf_run_proc.sh \
+	      odp_scheduling_run_proc.sh
 
 TEST_EXTENSIONS = .sh
 
diff --git a/test/linux-generic/performance/odp_crypto_run_proc.sh b/test/linux-generic/performance/odp_crypto_run_proc.sh
new file mode 100755
index 0000000..a8fdeb0
--- /dev/null
+++ b/test/linux-generic/performance/odp_crypto_run_proc.sh
@@ -0,0 +1,22 @@ 
+#!/bin/sh
+#
+# Copyright (c) 2016, Linaro Limited
+# All rights reserved.
+#
+# SPDX-License-Identifier:	BSD-3-Clause
+#
+# Script that passes command line arguments to odp_crypto test when
+# launched by 'make check'
+
+TEST_DIR="${TEST_DIR:-$(dirname $0)}"
+PERFORMANCE="$TEST_DIR/../../common_plat/performance"
+ret=0
+
+run()
+{
+	$PERFORMANCE/odp_crypto${EXEEXT} --odph_proc  || ret=1
+}
+
+run
+
+exit $ret
diff --git a/test/linux-generic/performance/odp_l2fwd_run_proc.sh b/test/linux-generic/performance/odp_l2fwd_run_proc.sh
new file mode 100755
index 0000000..5e0b0a6
--- /dev/null
+++ b/test/linux-generic/performance/odp_l2fwd_run_proc.sh
@@ -0,0 +1,117 @@ 
+#!/bin/sh
+#
+# Copyright (c) 2016, Linaro Limited
+# All rights reserved.
+#
+# SPDX-License-Identifier:	BSD-3-Clause
+#
+
+# TEST_DIR is set by Makefile, when we add a rule to Makefile for odp_l2fwd_run
+# we can use TEST_DIR the same way odp_pktio_run uses it now.
+# If TEST_DIR is not set it means we are not running with make, and in this case
+# there are two situations:
+# 1. user build ODP in the same dir as the source (most likely)
+#    here the user can simply call odp_l2fwd_run
+# 2. user may have built ODP in a separate build dir (like bitbake usually does)
+#    here the user has to do something like $ODP/test/performance/odp_l2fwd_run
+#
+# In both situations the script assumes that the user is in the directory where
+# odp_l2fwd exists. If that's not true, then the user has to specify the path
+# to it and run:
+# TEST_DIR=$builddir $ODP/test/performance/odp_l2fwd_run
+
+# directory where test binaries have been built
+TEST_DIR="${TEST_DIR:-$PWD}"
+PERFORMANCE="$TEST_DIR/../../common_plat/performance"
+
+# directory where test sources are, including scripts
+TEST_SRC_DIR=$(dirname $0)
+
+PATH=$TEST_DIR:$TEST_DIR/../../../example/generator:$PATH
+
+# exit codes expected by automake for skipped tests
+TEST_SKIPPED=77
+
+PLATFORM_VALIDATION=${TEST_SRC_DIR}/../../$ODP_PLATFORM/validation
+
+# Use installed pktio env or for make check take it from platform directory
+if [ -f "./pktio_env" ]; then
+	. ./pktio_env
+elif  [ "$ODP_PLATFORM" = "" ]; then
+	echo "$0: error: ODP_PLATFORM must be defined"
+	# not skipped as this should never happen via "make check"
+	exit 1
+elif [ -f ${PLATFORM_VALIDATION}/api/pktio/pktio_env ]; then
+	. ${PLATFORM_VALIDATION}/api/pktio/pktio_env
+else
+	echo "BUG: unable to find pktio_env!"
+	echo "pktio_env has to be in current directory or in \
+	      platform/\$ODP_PLATFORM/test."
+	echo "ODP_PLATFORM=\"$ODP_PLATFORM\""
+	exit 1
+fi
+
+run_l2fwd()
+{
+	setup_pktio_env clean # install trap to call cleanup_pktio_env
+
+	if [ $? -ne 0 ]; then
+		echo "setup_pktio_env error $?"
+		exit $TEST_SKIPPED
+	fi
+
+	type odp_generator > /dev/null
+	if [ $? -ne 0 ]; then
+		echo "odp_generator not installed. Aborting."
+		cleanup_pktio_env
+		exit 1
+	fi
+
+	#@todo: limit odp_generator to cores
+	#https://bugs.linaro.org/show_bug.cgi?id=1398
+	(odp_generator${EXEEXT} -I $IF0 \
+			--srcip 192.168.0.1 --dstip 192.168.0.2 \
+			-m u 2>&1 > /dev/null) \
+			2>&1 > /dev/null &
+	GEN_PID=$!
+
+	# this just turns off output buffering so that you still get periodic
+	# output while piping to tee, as long as stdbuf is available.
+	if [ "$(which stdbuf)" != "" ]; then
+		STDBUF="stdbuf -o 0"
+	else
+		STDBUF=
+	fi
+	LOG=odp_l2fwd_tmp.log
+
+	#skip this because process mode is broken
+	#$STDBUF ${PERFORMANCE}/odp_l2fwd${EXEEXT} --odph_proc -i $IF1,$IF2 \
+	#-m 0 -t 30 -c 2 | tee $LOG
+	#ret=$?
+	ret=77
+
+	kill ${GEN_PID}
+
+	if [ ! -f $LOG ]; then
+		echo "FAIL: $LOG not found"
+		ret=1
+	elif [ $ret -eq 0 ]; then
+		PASS_PPS=5000
+		MAX_PPS=$(awk '/TEST RESULT/ {print $3}' $LOG)
+		if [ "$MAX_PPS" -lt "$PASS_PPS" ]; then
+			echo "FAIL: pps below threshold $MAX_PPS < $PASS_PPS"
+			ret=1
+		fi
+	fi
+
+	rm -f $LOG
+	cleanup_pktio_env
+
+	exit $ret
+}
+
+case "$1" in
+	setup)   setup_pktio_env   ;;
+	cleanup) cleanup_pktio_env ;;
+	*)       run_l2fwd ;;
+esac
diff --git a/test/linux-generic/performance/odp_pktio_perf_run_proc.sh b/test/linux-generic/performance/odp_pktio_perf_run_proc.sh
new file mode 100755
index 0000000..fccc7eb
--- /dev/null
+++ b/test/linux-generic/performance/odp_pktio_perf_run_proc.sh
@@ -0,0 +1,24 @@ 
+#!/bin/sh
+#
+# Copyright (c) 2016, Linaro Limited
+# All rights reserved.
+#
+# SPDX-License-Identifier:	BSD-3-Clause
+#
+# Script that passes command line arguments to odp_crypto test when
+# launched by 'make check'
+
+TEST_DIR="${TEST_DIR:-$(dirname $0)}"
+PERFORMANCE="$TEST_DIR/../../common_plat/performance"
+ret=0
+
+run()
+{
+	#skip because process mode is broken
+	#$PERFORMANCE/odp_pktio_perf${EXEEXT} --odph_proc || ret=1
+	ret=77
+}
+
+run
+
+exit $ret