| Message ID | 20231130-sc8180x-primus-lid-polarity-v1-1-da917b59604b@quicinc.com |
|---|---|
| State | Accepted |
| Commit | 1aaa08e8de365cce59203541cafadb5053b1ec1a |
| Headers | show |
| Series | arm64: dts: qcom: sc8180x-primus: Fix HALL_INT polarity | expand |
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index fd2fab4895b3..a40ef23a2a4f 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -43,7 +43,7 @@ gpio-keys { pinctrl-0 = <&hall_int_active_state>; lid-switch { - gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; wakeup-source;
The hall sensor interrupt on the Primus is active low, which means that with the current configuration the device attempts to suspend when the LID is open. Fix the polarity of the HALL_INT GPIO to avoid this. Fixes: 2ce38cc1e8fe ("arm64: dts: qcom: sc8180x: Introduce Primus") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> --- arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- base-commit: 3cd3fe06ff81cfb3a969acb12a56796cff5af23d change-id: 20231130-sc8180x-primus-lid-polarity-54aa6405f61d Best regards,