diff mbox series

[v4] gpio: ixp4xx: Handle clock output on pin 14 and 15

Message ID 20231129-ixp4xx-gpio-clocks-v4-1-345f79058c6b@linaro.org
State Accepted
Commit 9a9429b9ce975bcc97b45824bdd153bee5bad46c
Headers show
Series [v4] gpio: ixp4xx: Handle clock output on pin 14 and 15 | expand

Commit Message

Linus Walleij Nov. 29, 2023, 10:37 p.m. UTC
This makes it possible to provide basic clock output on pins
14 and 15. The clocks are typically used by random electronics,
not modeled in the device tree, so they just need to be provided
on request.

In order to not disturb old systems that require that the
hardware defaults are kept in the clock setting bits, we only
manipulate these if either device tree property is present.
Once we know a device needs one of the clocks we can set it
in the device tree.

Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
The GPIO block on the very legacy IXP4xx GPIO can provide
a generated clock output on GPIO 14 and GPIO 15. This
provides a straight-forward solution with a flag for each
clock output.

More complicated solutions are thinkable, but I deemed them
overdesigned for this legacy SoC.
---
Changes in v4:
- Drop the merged bindings patch from the series.
- Fix a small optimization suggested by andy.
- Do not |= zeroes on registers, just put in a comment.
- Link to v3: https://lore.kernel.org/r/20230923-ixp4xx-gpio-clocks-v3-0-66f8fe4e7f15@linaro.org

Changes in v3:
- Make sure to only manipulate the clock bits if one of the clock
  DT properties is set. Devices we can't test may rely on HW defaults being
  preserved in the clock bits.
- Link to v2: https://lore.kernel.org/r/20230922-ixp4xx-gpio-clocks-v2-0-0215ee10976d@linaro.org

Changes in v2:
- Fixed formatting pipe | in bindings
- Fixed som blank lines in bindings
- When we will just blank out the clock register settings,
  don't spend time reading the initial value.
- Link to v1: https://lore.kernel.org/r/20230921-ixp4xx-gpio-clocks-v1-0-574942bf944a@linaro.org
---
 drivers/gpio/gpio-ixp4xx.c | 51 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)


---
base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
change-id: 20230921-ixp4xx-gpio-clocks-7e82289f4bb3

Best regards,

Comments

Bartosz Golaszewski Dec. 1, 2023, 9:48 a.m. UTC | #1
On Wed, Nov 29, 2023 at 11:37 PM Linus Walleij <linus.walleij@linaro.org> wrote:
>
> This makes it possible to provide basic clock output on pins
> 14 and 15. The clocks are typically used by random electronics,
> not modeled in the device tree, so they just need to be provided
> on request.
>
> In order to not disturb old systems that require that the
> hardware defaults are kept in the clock setting bits, we only
> manipulate these if either device tree property is present.
> Once we know a device needs one of the clocks we can set it
> in the device tree.
>
> Reviewed-by: Andy Shevchenko <andy@kernel.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> The GPIO block on the very legacy IXP4xx GPIO can provide
> a generated clock output on GPIO 14 and GPIO 15. This
> provides a straight-forward solution with a flag for each
> clock output.
>
> More complicated solutions are thinkable, but I deemed them
> overdesigned for this legacy SoC.
> ---

Applied, thanks!

Bart
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-ixp4xx.c b/drivers/gpio/gpio-ixp4xx.c
index dde6cf3a5779..c5a9fa640566 100644
--- a/drivers/gpio/gpio-ixp4xx.c
+++ b/drivers/gpio/gpio-ixp4xx.c
@@ -38,6 +38,18 @@ 
 #define IXP4XX_GPIO_STYLE_MASK		GENMASK(2, 0)
 #define IXP4XX_GPIO_STYLE_SIZE		3
 
+/*
+ * Clock output control register defines.
+ */
+#define IXP4XX_GPCLK_CLK0DC_SHIFT	0
+#define IXP4XX_GPCLK_CLK0TC_SHIFT	4
+#define IXP4XX_GPCLK_CLK0_MASK		GENMASK(7, 0)
+#define IXP4XX_GPCLK_MUX14		BIT(8)
+#define IXP4XX_GPCLK_CLK1DC_SHIFT	16
+#define IXP4XX_GPCLK_CLK1TC_SHIFT	20
+#define IXP4XX_GPCLK_CLK1_MASK		GENMASK(23, 16)
+#define IXP4XX_GPCLK_MUX15		BIT(24)
+
 /**
  * struct ixp4xx_gpio - IXP4 GPIO state container
  * @dev: containing device for this instance
@@ -202,6 +214,8 @@  static int ixp4xx_gpio_probe(struct platform_device *pdev)
 	struct ixp4xx_gpio *g;
 	struct gpio_irq_chip *girq;
 	struct device_node *irq_parent;
+	bool clk_14, clk_15;
+	u32 val;
 	int ret;
 
 	g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL);
@@ -225,13 +239,48 @@  static int ixp4xx_gpio_probe(struct platform_device *pdev)
 	}
 	g->fwnode = of_node_to_fwnode(np);
 
+	/*
+	 * If either clock output is enabled explicitly in the device tree
+	 * we take full control of the clock by masking off all bits for
+	 * the clock control and selectively enabling them. Otherwise
+	 * we leave the hardware default settings.
+	 *
+	 * Enable clock outputs with default timings of requested clock.
+	 * If you need control over TC and DC, add these to the device
+	 * tree bindings and use them here.
+	 */
+	clk_14 = of_property_read_bool(np, "intel,ixp4xx-gpio14-clkout");
+	clk_15 = of_property_read_bool(np, "intel,ixp4xx-gpio15-clkout");
+
 	/*
 	 * Make sure GPIO 14 and 15 are NOT used as clocks but GPIO on
 	 * specific machines.
 	 */
 	if (of_machine_is_compatible("dlink,dsm-g600-a") ||
 	    of_machine_is_compatible("iom,nas-100d"))
-		__raw_writel(0x0, g->base + IXP4XX_REG_GPCLK);
+		val = 0;
+	else {
+		val = __raw_readl(g->base + IXP4XX_REG_GPCLK);
+
+		if (clk_14 || clk_15) {
+			val &= ~(IXP4XX_GPCLK_MUX14 | IXP4XX_GPCLK_MUX15);
+			val &= ~IXP4XX_GPCLK_CLK0_MASK;
+			val &= ~IXP4XX_GPCLK_CLK1_MASK;
+			if (clk_14) {
+				/* IXP4XX_GPCLK_CLK0DC implicit low */
+				val |= (1 << IXP4XX_GPCLK_CLK0TC_SHIFT);
+				val |= IXP4XX_GPCLK_MUX14;
+			}
+
+			if (clk_15) {
+				/* IXP4XX_GPCLK_CLK1DC implicit low */
+				val |= (1 << IXP4XX_GPCLK_CLK1TC_SHIFT);
+				val |= IXP4XX_GPCLK_MUX15;
+			}
+		}
+	}
+
+	__raw_writel(val, g->base + IXP4XX_REG_GPCLK);
 
 	/*
 	 * This is a very special big-endian ARM issue: when the IXP4xx is