diff mbox series

[2/2] firmware: arm_scpi: Move power-domain driver to the pmdomain dir

Message ID 20231123120847.2825444-2-sudeep.holla@arm.com
State Accepted
Commit 62b14b9e86a1c94b1a2f41a52adcfda822a9863e
Headers show
Series [1/2] pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem | expand

Commit Message

Sudeep Holla Nov. 23, 2023, 12:08 p.m. UTC 
To simplify with maintenance let's move the Arm SCPI power-domain driver
to the new pmdomain directory. Note this is different from and precedes
the new Arm SCMI protocol.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/Kconfig                            |  9 ---------
 drivers/firmware/Makefile                           |  1 -
 drivers/pmdomain/arm/Kconfig                        | 12 ++++++++++++
 drivers/pmdomain/arm/Makefile                       |  1 +
 drivers/{firmware => pmdomain/arm}/scpi_pm_domain.c |  0
 5 files changed, 13 insertions(+), 10 deletions(-)
 rename drivers/{firmware => pmdomain/arm}/scpi_pm_domain.c (100%)

--
2.42.0
diff mbox series

Patch

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 4a98a859d44d..afeb050ae1b4 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -28,15 +28,6 @@  config ARM_SCPI_PROTOCOL
 	  This protocol library provides interface for all the client drivers
 	  making use of the features offered by the SCP.

-config ARM_SCPI_POWER_DOMAIN
-	tristate "SCPI power domain driver"
-	depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF)
-	default y
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  This enables support for the SCPI power domains which can be
-	  enabled or disabled via the SCP firmware
-
 config ARM_SDE_INTERFACE
 	bool "ARM Software Delegated Exception Interface (SDEI)"
 	depends on ARM64
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 5f9dab82e1a0..944833702ebd 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -3,7 +3,6 @@ 
 # Makefile for the linux kernel.
 #
 obj-$(CONFIG_ARM_SCPI_PROTOCOL)	+= arm_scpi.o
-obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
 obj-$(CONFIG_ARM_SDE_INTERFACE)	+= arm_sdei.o
 obj-$(CONFIG_DMI)		+= dmi_scan.o
 obj-$(CONFIG_DMI_SYSFS)		+= dmi-sysfs.o
diff --git a/drivers/pmdomain/arm/Kconfig b/drivers/pmdomain/arm/Kconfig
index acbe4331aaf7..efa139c34e08 100644
--- a/drivers/pmdomain/arm/Kconfig
+++ b/drivers/pmdomain/arm/Kconfig
@@ -23,3 +23,15 @@  config ARM_SCMI_POWER_DOMAIN
 	  This driver can also be built as a module. If so, the module
 	  will be called scmi_pm_domain. Note this may needed early in boot
 	  before rootfs may be available.
+
+config ARM_SCPI_POWER_DOMAIN
+	tristate "SCPI power domain driver"
+	depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF)
+	default y
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the SCPI power domains which can be
+	  enabled or disabled via the SCP firmware
+
+	  This driver can also be built as a module. If so, the module will be
+	  called scpi_pm_domain.
diff --git a/drivers/pmdomain/arm/Makefile b/drivers/pmdomain/arm/Makefile
index cfcb1f6cdd90..502fe4d0a83e 100644
--- a/drivers/pmdomain/arm/Makefile
+++ b/drivers/pmdomain/arm/Makefile
@@ -2,3 +2,4 @@ 

 obj-$(CONFIG_ARM_SCMI_PERF_DOMAIN) += scmi_perf_domain.o
 obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
+obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
diff --git a/drivers/firmware/scpi_pm_domain.c b/drivers/pmdomain/arm/scpi_pm_domain.c
similarity index 100%
rename from drivers/firmware/scpi_pm_domain.c
rename to drivers/pmdomain/arm/scpi_pm_domain.c