diff mbox series

[09/16] arm64: dts: qcom: sm8550-aim300: add flash LEDs

Message ID 20231117101817.4401-10-quic_tengfan@quicinc.com
State New
Headers show
Series arm64: qcom: add sm8550-aim300 board support | expand

Commit Message

Tengfei Fan Nov. 17, 2023, 10:18 a.m. UTC
Enable PM8550 PMIC flash LED controller and add two flash LEDs using
four current outputs.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)

Comments

Tengfei Fan Nov. 21, 2023, 12:54 a.m. UTC | #1
在 11/17/2023 6:34 PM, Krzysztof Kozlowski 写道:
> On 17/11/2023 11:18, Tengfei Fan wrote:
>> Enable PM8550 PMIC flash LED controller and add two flash LEDs using
>> four current outputs.
>>
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
> 
> NAK, it's initial submission.
> 
> Stop useless splitting of work which is done. You cannot have "release
> late, release often". The rule is: "release early, release often".
> 
> Or you want to split DTS per each line?
> 
> Best regards,
> Krzysztof
> 

Hi Krzysztof,
In next version patch series, I will do a board patch which contain all 
the functions which were splited in current patch series.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
index 6a9b384c4e08..cafddc02aef0 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
@@ -5,6 +5,7 @@ 
 
 /dts-v1/;
 
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8550.dtsi"
 #include "pm8010.dtsi"
@@ -452,6 +453,30 @@ 
 	status = "okay";
 };
 
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+	};
+};
+
 &pm8550b_eusb2_repeater {
 	vdd18-supply = <&vreg_l15b_1p8>;
 	vdd3-supply = <&vreg_l5b_3p1>;