@@ -461,6 +461,15 @@ static int spi_engine_transfer_one_message(struct spi_controller *host,
return 0;
}
+static void spi_engine_release_hw(void *p)
+{
+ struct spi_engine *spi_engine = p;
+
+ writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
+ writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
+ writel_relaxed(0x01, spi_engine->base + SPI_ENGINE_REG_RESET);
+}
+
static int spi_engine_probe(struct platform_device *pdev)
{
struct spi_engine *spi_engine;
@@ -506,6 +515,11 @@ static int spi_engine_probe(struct platform_device *pdev)
writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
+ ret = devm_add_action_or_reset(&pdev->dev, spi_engine_release_hw,
+ spi_engine);
+ if (ret)
+ return ret;
+
ret = request_irq(irq, spi_engine_irq, 0, pdev->name, host);
if (ret)
return ret;
@@ -532,16 +546,11 @@ static int spi_engine_probe(struct platform_device *pdev)
static void spi_engine_remove(struct platform_device *pdev)
{
struct spi_controller *host = platform_get_drvdata(pdev);
- struct spi_engine *spi_engine = spi_controller_get_devdata(host);
int irq = platform_get_irq(pdev, 0);
spi_unregister_controller(host);
free_irq(irq, host);
-
- writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
- writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
- writel_relaxed(0x01, spi_engine->base + SPI_ENGINE_REG_RESET);
}
static const struct of_device_id spi_engine_match_table[] = {
This moves the reset of the hardware to a devm action in the AXI SPI Engine driver. This will allow us to use devm on later calls in the probe function while preserving the order during cleanup. Signed-off-by: David Lechner <dlechner@baylibre.com> --- drivers/spi/spi-axi-spi-engine.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-)