diff mbox series

[2/3] fbdev: ssd1307fb: Change "solomon,page-offset" property default value

Message ID 20231116180743.2763021-2-javierm@redhat.com
State New
Headers show
Series None | expand

Commit Message

Javier Martinez Canillas Nov. 16, 2023, 6:07 p.m. UTC
This is used to specify the page start address offset of the display RAM.

The value is used as offset when setting the page start address with the
SSD130X_SET_PAGE_RANGE command, and the driver currently sets its value to
1 if the property is not present in the Device Tree.

But the datasheet mentions that the value on reset for the page start is a
0, so it makes more sense to also have 0 as the default value for the page
offset if the property is not present.

In fact, using a default value of 1 leads to the display not working when
the fbdev is attached to the framebuffer console.

Reported-by: Sahaj Sarup <sahaj.sarup@linaro.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
---

 drivers/video/fbdev/ssd1307fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Andy Shevchenko Nov. 17, 2023, 9:15 p.m. UTC | #1
On Thu, Nov 16, 2023 at 07:07:38PM +0100, Javier Martinez Canillas wrote:
> This is used to specify the page start address offset of the display RAM.
> 
> The value is used as offset when setting the page start address with the
> SSD130X_SET_PAGE_RANGE command, and the driver currently sets its value to
> 1 if the property is not present in the Device Tree.
> 
> But the datasheet mentions that the value on reset for the page start is a
> 0, so it makes more sense to also have 0 as the default value for the page
> offset if the property is not present.
> 
> In fact, using a default value of 1 leads to the display not working when
> the fbdev is attached to the framebuffer console.
> 
> Reported-by: Sahaj Sarup <sahaj.sarup@linaro.org>

Closes?
Fixes?

> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Javier Martinez Canillas Nov. 17, 2023, 10:18 p.m. UTC | #2
Andy Shevchenko <andriy.shevchenko@linux.intel.com> writes:

Hello Andy,

> On Thu, Nov 16, 2023 at 07:07:38PM +0100, Javier Martinez Canillas wrote:
>> This is used to specify the page start address offset of the display RAM.
>> 
>> The value is used as offset when setting the page start address with the
>> SSD130X_SET_PAGE_RANGE command, and the driver currently sets its value to
>> 1 if the property is not present in the Device Tree.
>> 
>> But the datasheet mentions that the value on reset for the page start is a
>> 0, so it makes more sense to also have 0 as the default value for the page
>> offset if the property is not present.
>> 
>> In fact, using a default value of 1 leads to the display not working when
>> the fbdev is attached to the framebuffer console.
>> 
>> Reported-by: Sahaj Sarup <sahaj.sarup@linaro.org>
>
> Closes?

There's no report in a mailing list or bug tracker to reference.

> Fixes?
>

Since the default has been the same since the driver was merged,
it doesn't make that much sense for me to reference that commit.
diff mbox series

Patch

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 5ae48e36fccb..34f014bf4994 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -637,7 +637,7 @@  static int ssd1307fb_probe(struct i2c_client *client)
 		par->height = 16;
 
 	if (device_property_read_u32(dev, "solomon,page-offset", &par->page_offset))
-		par->page_offset = 1;
+		par->page_offset = 0;
 
 	if (device_property_read_u32(dev, "solomon,col-offset", &par->col_offset))
 		par->col_offset = 0;