@@ -523,3 +523,76 @@ void __init slaunch_setup_txt(void)
pr_info("Intel TXT setup complete\n");
}
+
+static inline void smx_getsec_sexit(void)
+{
+ asm volatile (".byte 0x0f,0x37\n"
+ : : "a" (SMX_X86_GETSEC_SEXIT));
+}
+
+/*
+ * Used during kexec and on reboot paths to finalize the TXT state
+ * and do an SEXIT exiting the DRTM and disabling SMX mode.
+ */
+void slaunch_finalize(int do_sexit)
+{
+ u64 one = TXT_REGVALUE_ONE, val;
+ void __iomem *config;
+
+ if ((slaunch_get_flags() & (SL_FLAG_ACTIVE | SL_FLAG_ARCH_TXT)) !=
+ (SL_FLAG_ACTIVE | SL_FLAG_ARCH_TXT))
+ return;
+
+ config = ioremap(TXT_PRIV_CONFIG_REGS_BASE, TXT_NR_CONFIG_PAGES *
+ PAGE_SIZE);
+ if (!config) {
+ pr_emerg("Error SEXIT failed to ioremap TXT private reqs\n");
+ return;
+ }
+
+ /* Clear secrets bit for SEXIT */
+ memcpy_toio(config + TXT_CR_CMD_NO_SECRETS, &one, sizeof(one));
+ memcpy_fromio(&val, config + TXT_CR_E2STS, sizeof(val));
+
+ /* Unlock memory configurations */
+ memcpy_toio(config + TXT_CR_CMD_UNLOCK_MEM_CONFIG, &one, sizeof(one));
+ memcpy_fromio(&val, config + TXT_CR_E2STS, sizeof(val));
+
+ /* Close the TXT private register space */
+ memcpy_toio(config + TXT_CR_CMD_CLOSE_PRIVATE, &one, sizeof(one));
+ memcpy_fromio(&val, config + TXT_CR_E2STS, sizeof(val));
+
+ /*
+ * Calls to iounmap are not being done because of the state of the
+ * system this late in the kexec process. Local IRQs are disabled and
+ * iounmap causes a TLB flush which in turn causes a warning. Leaving
+ * thse mappings is not an issue since the next kernel is going to
+ * completely re-setup memory management.
+ */
+
+ /* Map public registers and do a final read fence */
+ config = ioremap(TXT_PUB_CONFIG_REGS_BASE, TXT_NR_CONFIG_PAGES *
+ PAGE_SIZE);
+ if (!config) {
+ pr_emerg("Error SEXIT failed to ioremap TXT public reqs\n");
+ return;
+ }
+
+ memcpy_fromio(&val, config + TXT_CR_E2STS, sizeof(val));
+
+ pr_emerg("TXT clear secrets bit and unlock memory complete.\n");
+
+ if (!do_sexit)
+ return;
+
+ if (smp_processor_id() != 0)
+ panic("Error TXT SEXIT must be called on CPU 0\n");
+
+ /* Disable SMX mode */
+ cr4_set_bits(X86_CR4_SMXE);
+
+ /* Do the SEXIT SMX operation */
+ smx_getsec_sexit();
+
+ pr_info("TXT SEXIT complete.\n");
+}
@@ -40,6 +40,7 @@
#include <linux/hugetlb.h>
#include <linux/objtool.h>
#include <linux/kmsg_dump.h>
+#include <linux/slaunch.h>
#include <asm/page.h>
#include <asm/sections.h>
@@ -1264,6 +1265,9 @@ int kernel_kexec(void)
cpu_hotplug_enable();
pr_notice("Starting new kernel\n");
machine_shutdown();
+
+ /* Finalize TXT registers and do SEXIT */
+ slaunch_finalize(1);
}
kmsg_dump(KMSG_DUMP_SHUTDOWN);
Prior to running the next kernel via kexec, the Secure Launch code closes down private SMX resources and does an SEXIT. This allows the next kernel to start normally without any issues starting the APs etc. Signed-off-by: Ross Philipson <ross.philipson@oracle.com> --- arch/x86/kernel/slaunch.c | 73 +++++++++++++++++++++++++++++++++++++++ kernel/kexec_core.c | 4 +++ 2 files changed, 77 insertions(+)