diff mbox series

[v2] scsi: libsas: Fix set zero-address when device-type != NO_DEVICE

Message ID 20231114134632.41128-1-yangxingui@huawei.com
State New
Headers show
Series [v2] scsi: libsas: Fix set zero-address when device-type != NO_DEVICE | expand

Commit Message

Xingui Yang Nov. 14, 2023, 1:46 p.m. UTC
Firstly, when ex_phy is added to the parent port, ex_phy->port is not set.
As a result, sas_port_delete_phy() won' t be called in
sas_unregister_devs_sas_addr() and it won't be deleted from the parent
port's phy_list.

Secondly, phy->attached_sas_addr will be set to a zero-address when
phy->linkrate < SAS_LINK_RATE_1_5_GBPS and device-type != NO_DEVICE during
device registration, such as stp. It will create a new port and all other
ex_phys whose addresses are zero will be added to the new port in
sas_ex_get_linkrate(), and it may trigger BUG() as follows:

[562240.051046] sas: phy19 part of wide port with phy16
[562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 0000000000000000 (no device)
[562240.051203] sas: done REVALIDATING DOMAIN on port 0, pid:435909, res 0x0

[562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
[562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp)
[562240.062680]  port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port
[562240.085064] ------------[ cut here ]------------
[562240.096612] kernel BUG at drivers/scsi/scsi_transport_sas.c:1083!
[562240.109611] Internal error: Oops - BUG: 0 [#1] SMP
[562240.343518] Process kworker/u256:3 (pid: 435909, stack limit = 0x0000000003bcbebf)
[562240.421714] Workqueue: 0000:b4:02.0_disco_q sas_revalidate_domain [libsas]
[562240.437173] pstate: 40c00009 (nZcv daif +PAN +UAO)
[562240.450478] pc : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.465283] lr : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.479751] sp : ffff0000300cfa70
[562240.674822] Call trace:
[562240.682709]  sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.694013]  sas_ex_get_linkrate.isra.5+0xcc/0x128 [libsas]
[562240.704957]  sas_ex_discover_end_dev+0xfc/0x538 [libsas]
[562240.715508]  sas_ex_discover_dev+0x3cc/0x4b8 [libsas]
[562240.725634]  sas_ex_discover_devices+0x9c/0x1a8 [libsas]
[562240.735855]  sas_ex_revalidate_domain+0x2f0/0x450 [libsas]
[562240.746123]  sas_revalidate_domain+0x158/0x160 [libsas]
[562240.756014]  process_one_work+0x1b4/0x448
[562240.764548]  worker_thread+0x54/0x468
[562240.772562]  kthread+0x134/0x138
[562240.779989]  ret_from_fork+0x10/0x18

So set ex_phy->port with parent_port when ex_phy is added to the parent
port and don't set a zero-address when phy->attached_dev_type != NO_DEVICE.

Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
---

v2 -> v1:
1. Set ex_phy->port with parent_port when ex_phy is added to the parent port
2. Set ex_phy to NULL when free expander
3. Update the comments

---
 drivers/scsi/libsas/sas_discover.c | 4 +++-
 drivers/scsi/libsas/sas_expander.c | 3 +--
 drivers/scsi/libsas/sas_internal.h | 1 +
 3 files changed, 5 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 8fb7c41c0962..8eb3888a9e57 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -296,8 +296,10 @@  void sas_free_device(struct kref *kref)
 	dev->phy = NULL;
 
 	/* remove the phys and ports, everything else should be gone */
-	if (dev_is_expander(dev->dev_type))
+	if (dev_is_expander(dev->dev_type)) {
 		kfree(dev->ex_dev.ex_phy);
+		dev->ex_dev.ex_phy = NULL;
+	}
 
 	if (dev_is_sata(dev) && dev->sata_dev.ap) {
 		ata_sas_tport_delete(dev->sata_dev.ap);
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index a2204674b680..5a81754d3768 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -239,8 +239,7 @@  static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
 	/* help some expanders that fail to zero sas_address in the 'no
 	 * device' case
 	 */
-	if (phy->attached_dev_type == SAS_PHY_UNUSED ||
-	    phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
+	if (phy->attached_dev_type == SAS_PHY_UNUSED)
 		memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
 	else
 		memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 3804aef165ad..e860d5b19880 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -202,6 +202,7 @@  static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
 		sas_port_mark_backlink(ex->parent_port);
 	}
 	sas_port_add_phy(ex->parent_port, ex_phy->phy);
+	ex_phy->port = ex->parent_port;
 }
 
 static inline struct domain_device *sas_alloc_device(void)