| Message ID | 20231029165716.69878-4-otto.pflueger@abscue.de |
|---|---|
| State | New |
| Headers | show |
| Series | ASoC: qcom: check ADSP version when setting clocks | expand |
Thanks Otto for the patches. On 29/10/2023 16:57, Otto Pflüger wrote: > Some older DSP firmware versions only provide AFE_PARAM_ID_*_CLK_CONFIG > requests for setting clocks, while newer ones only provide the > incompatible AFE_PARAM_ID_CLOCK_SET. The q6afe driver implements both, > but requires different clock IDs for the different firmware versions. > > Implement the LPAIF_*_CLK clocks using newer clock IDs when the DSP > firmware does not support the old clocks so that users don't have to > care about the firmware version when setting clocks. > > Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de> > --- > sound/soc/qcom/qdsp6/q6afe-dai.c | 98 +++++++++++++++++++++++++++----- > 1 file changed, 84 insertions(+), 14 deletions(-) > > diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c > index a9c4f896a7df..c66f8ab41d5e 100644 > --- a/sound/soc/qcom/qdsp6/q6afe-dai.c > +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c > @@ -14,6 +14,7 @@ > #include <sound/pcm_params.h> > #include "q6dsp-lpass-ports.h" > #include "q6dsp-common.h" > +#include "q6core.h" > #include "q6afe.h" > > > @@ -443,36 +444,105 @@ static int q6slim_set_channel_map(struct snd_soc_dai *dai, > return 0; > } > > +static int q6afe_get_bit_clk_id(unsigned int dai_id) > +{ > + switch (dai_id) { > + case PRIMARY_MI2S_RX: > + case PRIMARY_MI2S_TX: > + return Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT; > + case SECONDARY_MI2S_RX: > + case SECONDARY_MI2S_TX: > + return Q6AFE_LPASS_CLK_ID_SEC_MI2S_IBIT; > + case TERTIARY_MI2S_RX: > + case TERTIARY_MI2S_TX: > + return Q6AFE_LPASS_CLK_ID_TER_MI2S_IBIT; > + case QUATERNARY_MI2S_RX: > + case QUATERNARY_MI2S_TX: > + return Q6AFE_LPASS_CLK_ID_TER_MI2S_IBIT; > + case QUINARY_MI2S_RX: > + case QUINARY_MI2S_TX: > + return Q6AFE_LPASS_CLK_ID_QUI_MI2S_IBIT; > + > + case PRIMARY_TDM_RX_0 ... PRIMARY_TDM_TX_7: > + return Q6AFE_LPASS_CLK_ID_PRI_TDM_IBIT; > + case SECONDARY_TDM_RX_0 ... SECONDARY_TDM_TX_7: > + return Q6AFE_LPASS_CLK_ID_SEC_TDM_IBIT; > + case TERTIARY_TDM_RX_0 ... TERTIARY_TDM_TX_7: > + return Q6AFE_LPASS_CLK_ID_TER_TDM_IBIT; > + case QUATERNARY_TDM_RX_0 ... QUATERNARY_TDM_TX_7: > + return Q6AFE_LPASS_CLK_ID_QUAD_TDM_IBIT; > + case QUINARY_TDM_RX_0 ... QUINARY_TDM_TX_7: > + return Q6AFE_LPASS_CLK_ID_QUIN_TDM_IBIT; > + > + default: > + return -EINVAL; > + } > +} > + > +static int q6afe_get_osr_clk_id(unsigned int dai_id) > +{ > + switch (dai_id) { > + case QUINARY_MI2S_RX: > + case QUINARY_MI2S_TX: > + return Q6AFE_LPASS_CLK_ID_QUI_MI2S_OSR; > + > + case QUINARY_TDM_RX_0 ... QUINARY_TDM_TX_7: > + return Q6AFE_LPASS_CLK_ID_QUIN_TDM_OSR; > + > + default: > + return -EINVAL; > + } > +} > + > static int q6afe_mi2s_set_sysclk(struct snd_soc_dai *dai, > int clk_id, unsigned int freq, int dir) > { > struct q6afe_dai_data *dai_data = dev_get_drvdata(dai->dev); > struct q6afe_port *port = dai_data->port[dai->id]; > + int clk_src; > + int clk_root; > + bool use_new_clks = q6core_get_adsp_version() >= Q6_ADSP_VERSION_2_7; > > switch (clk_id) { > case LPAIF_DIG_CLK: > - return q6afe_port_set_sysclk(port, clk_id, 0, 5, freq, dir); > + if (use_new_clks) { > + clk_src = Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_NO; > + clk_root = Q6AFE_LPASS_CLK_ROOT_DEFAULT; > + clk_id = Q6AFE_LPASS_CLK_ID_INTERNAL_DIGITAL_CODEC_CORE; Why clk id is changed ? isn't machine driver passing the correct clk id? > + } else { > + clk_src = 0; > + clk_root = 5; > + } > + break; > case LPAIF_BIT_CLK: > case LPAIF_OSR_CLK: > - return q6afe_port_set_sysclk(port, clk_id, > - Q6AFE_LPASS_CLK_SRC_INTERNAL, > - Q6AFE_LPASS_CLK_ROOT_DEFAULT, > - freq, dir); > + if (use_new_clks) { > + clk_src = Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_NO; > + clk_root = Q6AFE_LPASS_CLK_ROOT_DEFAULT; > + if (clk_id == LPAIF_OSR_CLK) > + clk_id = q6afe_get_osr_clk_id(dai->id); > + else > + clk_id = q6afe_get_bit_clk_id(dai->id); same comment, why cant the machine driver pass correct clk id? This exactly like calling snd_soc_dai_set_sysclk(cpu_dai, Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT, MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK); from machine driver for PRIM_MI2S bit clk and simillar for OSR. --srini > + } else { > + clk_src = Q6AFE_LPASS_CLK_SRC_INTERNAL; > + clk_root = Q6AFE_LPASS_CLK_ROOT_DEFAULT; > + } > + break; > case Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT ... Q6AFE_LPASS_CLK_ID_QUI_MI2S_OSR: > case Q6AFE_LPASS_CLK_ID_MCLK_1 ... Q6AFE_LPASS_CLK_ID_INT_MCLK_1: > case Q6AFE_LPASS_CLK_ID_WSA_CORE_MCLK ... Q6AFE_LPASS_CLK_ID_VA_CORE_2X_MCLK: > - return q6afe_port_set_sysclk(port, clk_id, > - Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_NO, > - Q6AFE_LPASS_CLK_ROOT_DEFAULT, > - freq, dir); > + clk_src = Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_NO; > + clk_root = Q6AFE_LPASS_CLK_ROOT_DEFAULT; > + break; > case Q6AFE_LPASS_CLK_ID_PRI_TDM_IBIT ... Q6AFE_LPASS_CLK_ID_QUIN_TDM_EBIT: > - return q6afe_port_set_sysclk(port, clk_id, > - Q6AFE_LPASS_CLK_ATTRIBUTE_INVERT_COUPLE_NO, > - Q6AFE_LPASS_CLK_ROOT_DEFAULT, > - freq, dir); > + clk_src = Q6AFE_LPASS_CLK_ATTRIBUTE_INVERT_COUPLE_NO; > + clk_root = Q6AFE_LPASS_CLK_ROOT_DEFAULT; > + break; > + default: > + return 0; > } > > - return 0; > + return q6afe_port_set_sysclk(port, clk_id, clk_src, clk_root, freq, dir); > } > > static const struct snd_soc_dapm_route q6afe_dapm_routes[] = {
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index a9c4f896a7df..c66f8ab41d5e 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -14,6 +14,7 @@ #include <sound/pcm_params.h> #include "q6dsp-lpass-ports.h" #include "q6dsp-common.h" +#include "q6core.h" #include "q6afe.h" @@ -443,36 +444,105 @@ static int q6slim_set_channel_map(struct snd_soc_dai *dai, return 0; } +static int q6afe_get_bit_clk_id(unsigned int dai_id) +{ + switch (dai_id) { + case PRIMARY_MI2S_RX: + case PRIMARY_MI2S_TX: + return Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT; + case SECONDARY_MI2S_RX: + case SECONDARY_MI2S_TX: + return Q6AFE_LPASS_CLK_ID_SEC_MI2S_IBIT; + case TERTIARY_MI2S_RX: + case TERTIARY_MI2S_TX: + return Q6AFE_LPASS_CLK_ID_TER_MI2S_IBIT; + case QUATERNARY_MI2S_RX: + case QUATERNARY_MI2S_TX: + return Q6AFE_LPASS_CLK_ID_TER_MI2S_IBIT; + case QUINARY_MI2S_RX: + case QUINARY_MI2S_TX: + return Q6AFE_LPASS_CLK_ID_QUI_MI2S_IBIT; + + case PRIMARY_TDM_RX_0 ... PRIMARY_TDM_TX_7: + return Q6AFE_LPASS_CLK_ID_PRI_TDM_IBIT; + case SECONDARY_TDM_RX_0 ... SECONDARY_TDM_TX_7: + return Q6AFE_LPASS_CLK_ID_SEC_TDM_IBIT; + case TERTIARY_TDM_RX_0 ... TERTIARY_TDM_TX_7: + return Q6AFE_LPASS_CLK_ID_TER_TDM_IBIT; + case QUATERNARY_TDM_RX_0 ... QUATERNARY_TDM_TX_7: + return Q6AFE_LPASS_CLK_ID_QUAD_TDM_IBIT; + case QUINARY_TDM_RX_0 ... QUINARY_TDM_TX_7: + return Q6AFE_LPASS_CLK_ID_QUIN_TDM_IBIT; + + default: + return -EINVAL; + } +} + +static int q6afe_get_osr_clk_id(unsigned int dai_id) +{ + switch (dai_id) { + case QUINARY_MI2S_RX: + case QUINARY_MI2S_TX: + return Q6AFE_LPASS_CLK_ID_QUI_MI2S_OSR; + + case QUINARY_TDM_RX_0 ... QUINARY_TDM_TX_7: + return Q6AFE_LPASS_CLK_ID_QUIN_TDM_OSR; + + default: + return -EINVAL; + } +} + static int q6afe_mi2s_set_sysclk(struct snd_soc_dai *dai, int clk_id, unsigned int freq, int dir) { struct q6afe_dai_data *dai_data = dev_get_drvdata(dai->dev); struct q6afe_port *port = dai_data->port[dai->id]; + int clk_src; + int clk_root; + bool use_new_clks = q6core_get_adsp_version() >= Q6_ADSP_VERSION_2_7; switch (clk_id) { case LPAIF_DIG_CLK: - return q6afe_port_set_sysclk(port, clk_id, 0, 5, freq, dir); + if (use_new_clks) { + clk_src = Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_NO; + clk_root = Q6AFE_LPASS_CLK_ROOT_DEFAULT; + clk_id = Q6AFE_LPASS_CLK_ID_INTERNAL_DIGITAL_CODEC_CORE; + } else { + clk_src = 0; + clk_root = 5; + } + break; case LPAIF_BIT_CLK: case LPAIF_OSR_CLK: - return q6afe_port_set_sysclk(port, clk_id, - Q6AFE_LPASS_CLK_SRC_INTERNAL, - Q6AFE_LPASS_CLK_ROOT_DEFAULT, - freq, dir); + if (use_new_clks) { + clk_src = Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_NO; + clk_root = Q6AFE_LPASS_CLK_ROOT_DEFAULT; + if (clk_id == LPAIF_OSR_CLK) + clk_id = q6afe_get_osr_clk_id(dai->id); + else + clk_id = q6afe_get_bit_clk_id(dai->id); + } else { + clk_src = Q6AFE_LPASS_CLK_SRC_INTERNAL; + clk_root = Q6AFE_LPASS_CLK_ROOT_DEFAULT; + } + break; case Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT ... Q6AFE_LPASS_CLK_ID_QUI_MI2S_OSR: case Q6AFE_LPASS_CLK_ID_MCLK_1 ... Q6AFE_LPASS_CLK_ID_INT_MCLK_1: case Q6AFE_LPASS_CLK_ID_WSA_CORE_MCLK ... Q6AFE_LPASS_CLK_ID_VA_CORE_2X_MCLK: - return q6afe_port_set_sysclk(port, clk_id, - Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_NO, - Q6AFE_LPASS_CLK_ROOT_DEFAULT, - freq, dir); + clk_src = Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_NO; + clk_root = Q6AFE_LPASS_CLK_ROOT_DEFAULT; + break; case Q6AFE_LPASS_CLK_ID_PRI_TDM_IBIT ... Q6AFE_LPASS_CLK_ID_QUIN_TDM_EBIT: - return q6afe_port_set_sysclk(port, clk_id, - Q6AFE_LPASS_CLK_ATTRIBUTE_INVERT_COUPLE_NO, - Q6AFE_LPASS_CLK_ROOT_DEFAULT, - freq, dir); + clk_src = Q6AFE_LPASS_CLK_ATTRIBUTE_INVERT_COUPLE_NO; + clk_root = Q6AFE_LPASS_CLK_ROOT_DEFAULT; + break; + default: + return 0; } - return 0; + return q6afe_port_set_sysclk(port, clk_id, clk_src, clk_root, freq, dir); } static const struct snd_soc_dapm_route q6afe_dapm_routes[] = {
Some older DSP firmware versions only provide AFE_PARAM_ID_*_CLK_CONFIG requests for setting clocks, while newer ones only provide the incompatible AFE_PARAM_ID_CLOCK_SET. The q6afe driver implements both, but requires different clock IDs for the different firmware versions. Implement the LPAIF_*_CLK clocks using newer clock IDs when the DSP firmware does not support the old clocks so that users don't have to care about the firmware version when setting clocks. Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de> --- sound/soc/qcom/qdsp6/q6afe-dai.c | 98 +++++++++++++++++++++++++++----- 1 file changed, 84 insertions(+), 14 deletions(-)