diff mbox series

[1/2] dt-bindings: leds: add mps mp3326 LED

Message ID c8bbeb3c3d9b44049d790e90d9738a83@monolithicpower.com
State Superseded
Headers show
Series [1/2] dt-bindings: leds: add mps mp3326 LED | expand

Commit Message

Yuxi Wang Oct. 31, 2023, 6:59 a.m. UTC
Document mps mp3326 LED driver devicetree bindings.

Signed-off-by: Yuxi Wang <Yuxi.Wang@monolithicpower.com>
---
 .../devicetree/bindings/leds/leds-mp3326.yaml | 184 ++++++++++++++++++
 1 file changed, 184 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-mp3326.yaml

Comments

Krzysztof Kozlowski Oct. 31, 2023, 8:10 a.m. UTC | #1
On 31/10/2023 07:59, Yuxi (Yuxi) Wang wrote:
> 

1. Stray blank line in your commit.
2. Send patches with proper threading (which is by default by all
tools!). Lack of threading makes it difficult to apply entire set or use
b4 diff.

> Document mps mp3326 LED driver devicetree bindings.
> 
> Signed-off-by: Yuxi Wang <Yuxi.Wang@monolithicpower.com>
> ---
>  .../devicetree/bindings/leds/leds-mp3326.yaml | 184 ++++++++++++++++++
>  1 file changed, 184 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-mp3326.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-mp3326.yaml b/Documentation/devicetree/bindings/leds/leds-mp3326.yaml
> new file mode 100644
> index 000000000000..df03c21ae53a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-mp3326.yaml

Filename like compatible.

> @@ -0,0 +1,184 @@

> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds-mp3326.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LED driver for MP3326 from Monolithic Power Systems

"driver" as Linux driver? If so, drop. MP3326 could be a WLED driver, so
"driver" as hardware term, but it does not make sense in "driver for
MPS3326"


> +
> +maintainers:
> +  - Yuxi Wang <Yuxi.Wang@monolithicpower.com>
> +
> +description: |
> +  Monolithic Power Systems MP3326 LED Drivers
> +
> +  For more product information please see the link below:
> +  https://www.monolithicpower.com/en/products/mp3326.html
> +
> +properties:
> +  compatible:
> +    - const: mps,mp3326

It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.

I'll stop reviewing. No point to review untested code.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/leds-mp3326.yaml b/Documentation/devicetree/bindings/leds/leds-mp3326.yaml
new file mode 100644
index 000000000000..df03c21ae53a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mp3326.yaml
@@ -0,0 +1,184 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds-mp3326.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MP3326 from Monolithic Power Systems
+
+maintainers:
+  - Yuxi Wang <Yuxi.Wang@monolithicpower.com>
+
+description: |
+  Monolithic Power Systems MP3326 LED Drivers
+
+  For more product information please see the link below:
+  https://www.monolithicpower.com/en/products/mp3326.html
+
+properties:
+  compatible:
+    - const: mps,mp3326
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  mps,led-protect:
+    description: |
+      LED short protection threshold.
+    enum: [0, 1, 2, 3]
+
+  multi-led:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+      color:
+        description: RGB module
+        const: LED_COLOR_ID_RGB
+
+      led_r:
+        type: object
+
+        properties:
+          "#address-cells":
+            const: 1
+          "#size-cells":
+            const: 0
+          reg:
+            description: Index of the LED.
+            minimum: 1
+            maximum: 16
+          color:
+            description: Red.
+            const: LED_COLOR_ID_RED
+          required:
+            - reg
+            - color
+
+      led_g:
+        type: object
+
+        properties:
+          "#address-cells":
+            const: 1
+          "#size-cells":
+            const: 0
+        reg:
+          description: Index of the LED.
+          minimum: 1
+          maximum: 16
+        color:
+          description: Green.
+          const: LED_COLOR_ID_GREEN
+        required:
+          - reg
+          - color
+
+      led_b:
+        type: object
+
+        properties:
+          "#address-cells":
+            const: 1
+          "#size-cells":
+            const: 0
+        reg:
+          description: Index of the LED.
+          minimum: 1
+          maximum: 16
+        color:
+          description: Blue.
+          const: LED_COLOR_ID_BLUE
+        required:
+          - reg
+          - color
+
+  patternProperties:
+    "^led@[0-3]$":
+      type: object
+
+      properties:
+        reg:
+          description: Index of the LED.
+          minimum: 1
+          maximum: 16
+
+        required:
+          - reg
+          - color
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mp3326@30 {
+            compatible = "mps,mp3326";
+            reg = <0x30>;
+            led-protect =<3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            multi-led {
+              color = <LED_COLOR_ID_RGB>;
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              rgb_r@1 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg  = <1>;
+                  color = <LED_COLOR_ID_RED>;
+              };
+              rgb_g@2 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <2>;
+                  color = <LED_COLOR_ID_GREEN>;
+              };
+              rgb_b@3 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <3>;
+                  color = <LED_COLOR_ID_BLUE>;
+              };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mp3326@30 {
+            compatible = "mps,mp3326";
+            reg = <0x30>;
+            led-protect =<3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            led0@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg= <5>;
+                color = <LED_COLOR_ID_WHITE>;
+            };
+        };
+    };
+
+...