| Message ID | 20231031072124.201181-3-Delphine_CC_Chiu@Wiwynn.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | LTC4286 and LTC4287 driver support | expand |
> -----Original Message----- > From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck > Sent: Wednesday, November 1, 2023 2:10 AM > To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>; > patrick@stwcx.xyz; Jean Delvare <jdelvare@suse.com>; Jonathan Corbet > <corbet@lwn.net> > Cc: Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski > <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley <conor+dt@kernel.org>; > linux-i2c@vger.kernel.org; linux-hwmon@vger.kernel.org; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; > linux-doc@vger.kernel.org > Subject: Re: [PATCH v3 2/2] hwmon: pmbus: Add ltc4286 driver > > Security Reminder: Please be aware that this email is sent by an external > sender. > > On 10/31/23 00:21, Delphine CC Chiu wrote: > > Add a driver to support ltc4286 chip > > > > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> > > > > Changelog: > > v3 - Use dev_err_probe() instead of dev_err() > > - The VRANGE_SELECT bit only be written if it actually changed > > - Avoid the info pointer being overwritten > > - Check the MBR value range to avoid overflow > > - Revise ltc4286.rst to corrcet description > > v2 - Revise Linear Technologies LTC4286 to > > Analog Devices LTC4286 in Kconfig > > - Add more description for this driver in Kconfig > > - Add some comments for MBR setting in ltc4286.c > > - Add ltc4286.rst > > --- > > Documentation/hwmon/ltc4286.rst | 95 +++++++++++++++++ > > Needs to be added to Documentation/hwmon/index.rst We will add to Documentation/hwmon/index.rst > > > drivers/hwmon/pmbus/Kconfig | 9 ++ > > drivers/hwmon/pmbus/Makefile | 1 + > > drivers/hwmon/pmbus/ltc4286.c | 178 > ++++++++++++++++++++++++++++++++ > > 4 files changed, 283 insertions(+) > > create mode 100644 Documentation/hwmon/ltc4286.rst > > create mode 100644 drivers/hwmon/pmbus/ltc4286.c > > > > diff --git a/Documentation/hwmon/ltc4286.rst > > b/Documentation/hwmon/ltc4286.rst new file mode 100644 index > > 000000000000..2cd149676d86 > > --- /dev/null > > +++ b/Documentation/hwmon/ltc4286.rst > > @@ -0,0 +1,95 @@ > > +.. SPDX-License-Identifier: GPL-2.0-or-later > > + > > +Kernel driver ltc4286 > > +===================== > > + > > +Supported chips: > > + > > + * Analog Devices LTC4286 > > + > > + Prefix: 'ltc4286' > > + > > + Addresses scanned: - > > + > > + Datasheet: > > + https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww > > + > w.analog.com%2Fmedia%2Fen%2Ftechnical-documentation%2Fdata-sheets%2 > F > > + > ltc4286.pdf&data=05%7C01%7CWayne_SC_Liu%40wiwynn.com%7C19174887b > 0924 > > + > 20a374208dbda3c8d3b%7Cda6e0628fc834caf9dd273061cbab167%7C0%7C0% > 7C638 > > + > 343725997659187%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiL > CJQIjoi > > + > V2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=0Vi > JT74 > > + gySA7E0eBm%2FOBDkVAxp72j1spi8UG8un6zW4%3D&reserved=0 > > + > > + * Analog Devices LTC4287 > > + > > + Prefix: 'ltc4287' > > + > > + Addresses scanned: - > > + > > + Datasheet: > > + https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww > > + > w.analog.com%2Fmedia%2Fen%2Ftechnical-documentation%2Fdata-sheets%2 > F > > + > ltc4287.pdf&data=05%7C01%7CWayne_SC_Liu%40wiwynn.com%7C19174887b > 0924 > > + > 20a374208dbda3c8d3b%7Cda6e0628fc834caf9dd273061cbab167%7C0%7C0% > 7C638 > > + > 343725997659187%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiL > CJQIjoi > > + > V2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ZW > BSxI9 > > + ZgOgKMTU0UhQal9OiYjAUTPLXijAZqzN%2Fuh0%3D&reserved=0 > > + > > +Author: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> > > + > > + > > +Description > > +----------- > > + > > +This driver supports hardware monitoring for Analog Devices LTC4286 > > +and LTC4287 Hot-Swap Controller and Digital Power Monitors. > > + > > +LTC4286 and LTC4287 are hot-swap controllers that allow a circuit > > +board to be removed from or inserted into a live backplane. They also > > +feature current and voltage readback via an integrated 12 bit > > +analog-to-digital converter (ADC), accessed using a PMBus interface. > > + > > +The driver is a client driver to the core PMBus driver. Please see > > +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. > > + > > + > > +Usage Notes > > +----------- > > + > > +This driver does not auto-detect devices. You will have to > > +instantiate the devices explicitly. Please see > > +Documentation/i2c/instantiating-devices.rst for details. > > + > > +The shunt value in micro-ohms can be set via device tree at > > +compile-time. Please refer to the > > +Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml for bindings > if the device tree is used. > > + > > + > > +Platform data support > > +--------------------- > > + > > +The driver supports standard PMBus driver platform data. Please see > > +Documentation/hwmon/pmbus.rst for details. > > + > > + > > +Sysfs entries > > +------------- > > + > > +The following attributes are supported. Limits are read-write, > > +history reset attributes are write-only, all other attributes are read-only. > > + > > +======================= > ======================================================= > > +in1_label "vin" > > +in1_input Measured voltage. > > +in1_alarm Input voltage alarm. > > +in1_min Minimum input voltage. > > +in1_max Maximum input voltage. > > + > > +in2_label "vout1" > > +in2_input Measured voltage. > > +in2_alarm Output voltage alarm. > > +in2_min Minimum output voltage. > > +in2_max Maximum output voltage. > > + > > +curr1_label "iout1" > > +curr1_input Measured current. > > +curr1_alarm Output current alarm. > > +curr1_max Maximum current. > > + > > +power1_label "pin" > > +power1_input Input power. > > +power1_alarm Input power alarm. > > +power1_max Maximum poewr. > > + > > +temp1_input Chip temperature. > > +temp1_min Minimum chip temperature. > > +temp1_max Maximum chip temperature. > > +temp1_crit Critical chip temperature. > > +temp1_alarm Chip temperature alarm. > > +======================= > > +======================================================= > > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig > > index b4e93bd5835e..f2b53e8abc3c 100644 > > --- a/drivers/hwmon/pmbus/Kconfig > > +++ b/drivers/hwmon/pmbus/Kconfig > > @@ -226,6 +226,15 @@ config SENSORS_LTC3815 > > > > This driver can also be built as a module. If so, the module will > > be called ltc3815. > > Add empty line We will add empty line here > > > +config SENSORS_LTC4286 > > + bool "Analog Devices LTC4286" > > + help > > + LTC4286 is an integrated solution for hot swap applications that > > + allows a board to be safely inserted and removed from a live > > + backplane. > > + This chip could be used to monitor voltage, current, ...etc. > > + If you say yes here you get hardware monitoring support for Analog > > + Devices LTC4286. > > > > config SENSORS_MAX15301 > > tristate "Maxim MAX15301" > > diff --git a/drivers/hwmon/pmbus/Makefile > > b/drivers/hwmon/pmbus/Makefile index 84ee960a6c2d..94e28f6d6a61 > 100644 > > --- a/drivers/hwmon/pmbus/Makefile > > +++ b/drivers/hwmon/pmbus/Makefile > > @@ -24,6 +24,7 @@ obj-$(CONFIG_SENSORS_LM25066) += > lm25066.o > > obj-$(CONFIG_SENSORS_LT7182S) += lt7182s.o > > obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o > > obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o > > +obj-$(CONFIG_SENSORS_LTC4286) += ltc4286.o > > obj-$(CONFIG_SENSORS_MAX15301) += max15301.o > > obj-$(CONFIG_SENSORS_MAX16064) += max16064.o > > obj-$(CONFIG_SENSORS_MAX16601) += max16601.o > > diff --git a/drivers/hwmon/pmbus/ltc4286.c > > b/drivers/hwmon/pmbus/ltc4286.c new file mode 100644 index > > 000000000000..042d3af99489 > > --- /dev/null > > +++ b/drivers/hwmon/pmbus/ltc4286.c > > @@ -0,0 +1,178 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > + > > +#include <linux/err.h> > > +#include <linux/i2c.h> > > +#include <linux/init.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/pmbus.h> > > +#include "pmbus.h" > > + > > +/* LTC4286 register */ > > +#define LTC4286_MFR_CONFIG1 0xF2 > > + > > +/* LTC4286 configuration */ > > +#define VRANGE_SELECT_BIT BIT(1) > > + > > +#define LTC4286_MFR_ID_SIZE 3 > > +#define VRANGE_25P6 0 > > + > > +enum chips { ltc4286, ltc4287 }; > > Not really used anywhere and can be dropped. We use this enum in v3 line 63-64 > > > + > > +/* > > + * Initialize the MBR as default settings which is referred to > > +LTC4286 datasheet > > + * (March 22, 2022 version) table 3 page 16 */ static struct > > +pmbus_driver_info ltc4286_info = { > > + .pages = 1, > > + .format[PSC_VOLTAGE_IN] = direct, > > + .format[PSC_VOLTAGE_OUT] = direct, > > + .format[PSC_CURRENT_OUT] = direct, > > + .format[PSC_POWER] = direct, > > + .format[PSC_TEMPERATURE] = direct, > > + .m[PSC_VOLTAGE_IN] = 32, > > + .b[PSC_VOLTAGE_IN] = 0, > > + .R[PSC_VOLTAGE_IN] = 1, > > + .m[PSC_VOLTAGE_OUT] = 32, > > + .b[PSC_VOLTAGE_OUT] = 0, > > + .R[PSC_VOLTAGE_OUT] = 1, > > + .m[PSC_CURRENT_OUT] = 1024, > > + .b[PSC_CURRENT_OUT] = 0, > > + /* > > + * The rsense value used in MBR formula in LTC4286 datasheet > should be ohm unit. > > + * However, the rsense value that user input is mirco ohm. > > micro We will revise this typo > > > + * Thus, the MBR setting which involves rsense should be shifted by 6 > digits. > > + */ > > + .R[PSC_CURRENT_OUT] = 3 - 6, > > + .m[PSC_POWER] = 1, > > + .b[PSC_POWER] = 0, > > + /* > > + * The rsense value used in MBR formula in LTC4286 datasheet > should be ohm unit. > > + * However, the rsense value that user input is mirco ohm. > > micro We will revise this typo > > > + * Thus, the MBR setting which involves rsense should be shifted by 6 > digits. > > + */ > > + .R[PSC_POWER] = 4 - 6, > > + .m[PSC_TEMPERATURE] = 1, > > + .b[PSC_TEMPERATURE] = 273, > > + .R[PSC_TEMPERATURE] = 0, > > + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | > PMBUS_HAVE_IOUT | > > + PMBUS_HAVE_PIN | PMBUS_HAVE_TEMP | > PMBUS_HAVE_STATUS_VOUT | > > + PMBUS_HAVE_STATUS_IOUT | > PMBUS_HAVE_STATUS_TEMP, }; > > + > > +static const struct i2c_device_id ltc4286_id[] = { { "ltc4286", ltc4286 }, > > + { "ltc4287", > ltc4287 }, > > + {} }; > > +MODULE_DEVICE_TABLE(i2c, ltc4286_id); > > + > > +static int ltc4286_probe(struct i2c_client *client) { > > + int ret; > > + const struct i2c_device_id *mid; > > + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; > > + struct pmbus_driver_info *info; > > + u32 rsense; > > + > > + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, > block_buffer); > > + if (ret < 0) { > > + return dev_err_probe(&client->dev, ret, > > + "Failed to read manufacturer > id\n"); > > + } > > + > > + /* > > + * Refer to ltc4286 datasheet page 20 > > + * the manufacturer id is LTC > > + */ > > + if (ret != LTC4286_MFR_ID_SIZE || > > + strncmp(block_buffer, "LTC", LTC4286_MFR_ID_SIZE)) { > > + return dev_err_probe(&client->dev, ret, > > + "Manufacturer id mismatch\n"); > > + } > > + > > + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, > block_buffer); > > + if (ret < 0) { > > + return dev_err_probe(&client->dev, ret, > > + "Failed to read manufacturer > model\n"); > > + } > > + > > + for (mid = ltc4286_id; mid->name[0]; mid++) { > > + if (!strncasecmp(mid->name, block_buffer, > strlen(mid->name))) > > + break; > > + } > > + if (!mid->name[0]) > > + return dev_err_probe(&client->dev, -ENODEV, > > + "Unsupported device\n"); > > + > > + ret = of_property_read_u32(client->dev.of_node, > > + "shunt-resistor-micro-ohms", > &rsense); > > + if (ret < 0) > > + return ret; > > + > > + if (rsense == 0) > > + return -EINVAL; > > + > > + info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); > > + if (!info) > > + return -ENOMEM; > > + memcpy(info, <c4286_info, sizeof(*info)); > > devm_kmemdup() We will revise as below info = devm_kmemdup(&client->dev, <c4286_info, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; > > > + > > + /* Default of VRANGE_SELECT = 1, 102.4V */ > > + if (device_property_read_bool(&client->dev, "adi,vrange-low-enable")) > { > > + /* Setup MFR1 CONFIG register bit 1 VRANGE_SELECT */ > > + ret = i2c_smbus_read_word_data(client, > LTC4286_MFR_CONFIG1); > > + if (ret < 0) { > > + return dev_err_probe( > > + &client->dev, ret, > > + "Failed to read manufacturer > configuration one\n"); > > + } > > + > > + if ((ret & VRANGE_SELECT_BIT) != VRANGE_25P6) { > > + ret &= ~VRANGE_SELECT_BIT; /* > VRANGE_SELECT = 0, 25.6V */ > > + ret = i2c_smbus_write_word_data( > > + client, LTC4286_MFR_CONFIG1, ret); > > + if (ret < 0) > > + return dev_err_probe(&client->dev, ret, > > + "Failed to set > vrange\n"); > > + } > > + > > + info->m[PSC_VOLTAGE_IN] = 128; > > + info->m[PSC_VOLTAGE_OUT] = 128; > > + info->m[PSC_POWER] = 4 * rsense; > > + if (info->m[PSC_POWER] > INT_MAX) > > This is too late. See below. We will check sooner. > > > + return dev_err_probe(&client->dev, -ERANGE, > > + "Power coefficient > overflow\n"); > > + } else { > > + info->m[PSC_POWER] = rsense; > > + if (info->m[PSC_POWER] > INT_MAX) > > + return dev_err_probe(&client->dev, -ERANGE, > > + "Power coefficient > > + overflow\n"); > > This still needs to be written into the chip. There is no guarantee that the chip > is in its default configuration when the driver is loaded. We will check sooner. > > > + } > > + > > + info->m[PSC_CURRENT_OUT] = 1024 * rsense; > > + if (info->m[PSC_CURRENT_OUT] > INT_MAX) > > This is too late. If rsense == INT_MAX, for example, 1024 * rsense will be some > negative number. We will check sooner. > > > + return dev_err_probe(&client->dev, -ERANGE, > > + "Current coefficient overflow\n"); > > + > > + return pmbus_do_probe(client, info); } > > + > > +static const struct of_device_id ltc4286_of_match[] = { > > + { .compatible = "lltc,ltc4286" }, > > + { .compatible = "lltc,ltc4287" }, > > + {} > > +}; > > + > > +static struct i2c_driver ltc4286_driver = { > > + .driver = { > > + .name = "ltc4286", > > + .of_match_table = ltc4286_of_match, > > + }, > > + .probe = ltc4286_probe, > > + .id_table = ltc4286_id, > > +}; > > + > > +module_i2c_driver(ltc4286_driver); > > + > > +MODULE_AUTHOR("Delphine CC Chiu > <Delphine_CC_Chiu@wiwynn.com>"); > > +MODULE_DESCRIPTION("PMBUS driver for LTC4286 and compatibles"); > > +MODULE_LICENSE("GPL");
diff --git a/Documentation/hwmon/ltc4286.rst b/Documentation/hwmon/ltc4286.rst new file mode 100644 index 000000000000..2cd149676d86 --- /dev/null +++ b/Documentation/hwmon/ltc4286.rst @@ -0,0 +1,95 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver ltc4286 +===================== + +Supported chips: + + * Analog Devices LTC4286 + + Prefix: 'ltc4286' + + Addresses scanned: - + + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4286.pdf + + * Analog Devices LTC4287 + + Prefix: 'ltc4287' + + Addresses scanned: - + + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4287.pdf + +Author: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> + + +Description +----------- + +This driver supports hardware monitoring for Analog Devices LTC4286 +and LTC4287 Hot-Swap Controller and Digital Power Monitors. + +LTC4286 and LTC4287 are hot-swap controllers that allow a circuit board +to be removed from or inserted into a live backplane. They also feature +current and voltage readback via an integrated 12 bit analog-to-digital +converter (ADC), accessed using a PMBus interface. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for +details. + +The shunt value in micro-ohms can be set via device tree at compile-time. Please +refer to the Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml for bindings +if the device tree is used. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. Please see +Documentation/hwmon/pmbus.rst for details. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write, history reset +attributes are write-only, all other attributes are read-only. + +======================= ======================================================= +in1_label "vin" +in1_input Measured voltage. +in1_alarm Input voltage alarm. +in1_min Minimum input voltage. +in1_max Maximum input voltage. + +in2_label "vout1" +in2_input Measured voltage. +in2_alarm Output voltage alarm. +in2_min Minimum output voltage. +in2_max Maximum output voltage. + +curr1_label "iout1" +curr1_input Measured current. +curr1_alarm Output current alarm. +curr1_max Maximum current. + +power1_label "pin" +power1_input Input power. +power1_alarm Input power alarm. +power1_max Maximum poewr. + +temp1_input Chip temperature. +temp1_min Minimum chip temperature. +temp1_max Maximum chip temperature. +temp1_crit Critical chip temperature. +temp1_alarm Chip temperature alarm. +======================= ======================================================= diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index b4e93bd5835e..f2b53e8abc3c 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -226,6 +226,15 @@ config SENSORS_LTC3815 This driver can also be built as a module. If so, the module will be called ltc3815. +config SENSORS_LTC4286 + bool "Analog Devices LTC4286" + help + LTC4286 is an integrated solution for hot swap applications that + allows a board to be safely inserted and removed from a live + backplane. + This chip could be used to monitor voltage, current, ...etc. + If you say yes here you get hardware monitoring support for Analog + Devices LTC4286. config SENSORS_MAX15301 tristate "Maxim MAX15301" diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 84ee960a6c2d..94e28f6d6a61 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_SENSORS_LM25066) += lm25066.o obj-$(CONFIG_SENSORS_LT7182S) += lt7182s.o obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o +obj-$(CONFIG_SENSORS_LTC4286) += ltc4286.o obj-$(CONFIG_SENSORS_MAX15301) += max15301.o obj-$(CONFIG_SENSORS_MAX16064) += max16064.o obj-$(CONFIG_SENSORS_MAX16601) += max16601.o diff --git a/drivers/hwmon/pmbus/ltc4286.c b/drivers/hwmon/pmbus/ltc4286.c new file mode 100644 index 000000000000..042d3af99489 --- /dev/null +++ b/drivers/hwmon/pmbus/ltc4286.c @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pmbus.h> +#include "pmbus.h" + +/* LTC4286 register */ +#define LTC4286_MFR_CONFIG1 0xF2 + +/* LTC4286 configuration */ +#define VRANGE_SELECT_BIT BIT(1) + +#define LTC4286_MFR_ID_SIZE 3 +#define VRANGE_25P6 0 + +enum chips { ltc4286, ltc4287 }; + +/* + * Initialize the MBR as default settings which is referred to LTC4286 datasheet + * (March 22, 2022 version) table 3 page 16 + */ +static struct pmbus_driver_info ltc4286_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_CURRENT_OUT] = direct, + .format[PSC_POWER] = direct, + .format[PSC_TEMPERATURE] = direct, + .m[PSC_VOLTAGE_IN] = 32, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = 1, + .m[PSC_VOLTAGE_OUT] = 32, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = 1, + .m[PSC_CURRENT_OUT] = 1024, + .b[PSC_CURRENT_OUT] = 0, + /* + * The rsense value used in MBR formula in LTC4286 datasheet should be ohm unit. + * However, the rsense value that user input is mirco ohm. + * Thus, the MBR setting which involves rsense should be shifted by 6 digits. + */ + .R[PSC_CURRENT_OUT] = 3 - 6, + .m[PSC_POWER] = 1, + .b[PSC_POWER] = 0, + /* + * The rsense value used in MBR formula in LTC4286 datasheet should be ohm unit. + * However, the rsense value that user input is mirco ohm. + * Thus, the MBR setting which involves rsense should be shifted by 6 digits. + */ + .R[PSC_POWER] = 4 - 6, + .m[PSC_TEMPERATURE] = 1, + .b[PSC_TEMPERATURE] = 273, + .R[PSC_TEMPERATURE] = 0, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | + PMBUS_HAVE_PIN | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_TEMP, +}; + +static const struct i2c_device_id ltc4286_id[] = { { "ltc4286", ltc4286 }, + { "ltc4287", ltc4287 }, + {} }; +MODULE_DEVICE_TABLE(i2c, ltc4286_id); + +static int ltc4286_probe(struct i2c_client *client) +{ + int ret; + const struct i2c_device_id *mid; + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; + struct pmbus_driver_info *info; + u32 rsense; + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, block_buffer); + if (ret < 0) { + return dev_err_probe(&client->dev, ret, + "Failed to read manufacturer id\n"); + } + + /* + * Refer to ltc4286 datasheet page 20 + * the manufacturer id is LTC + */ + if (ret != LTC4286_MFR_ID_SIZE || + strncmp(block_buffer, "LTC", LTC4286_MFR_ID_SIZE)) { + return dev_err_probe(&client->dev, ret, + "Manufacturer id mismatch\n"); + } + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer); + if (ret < 0) { + return dev_err_probe(&client->dev, ret, + "Failed to read manufacturer model\n"); + } + + for (mid = ltc4286_id; mid->name[0]; mid++) { + if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) + break; + } + if (!mid->name[0]) + return dev_err_probe(&client->dev, -ENODEV, + "Unsupported device\n"); + + ret = of_property_read_u32(client->dev.of_node, + "shunt-resistor-micro-ohms", &rsense); + if (ret < 0) + return ret; + + if (rsense == 0) + return -EINVAL; + + info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + memcpy(info, <c4286_info, sizeof(*info)); + + /* Default of VRANGE_SELECT = 1, 102.4V */ + if (device_property_read_bool(&client->dev, "adi,vrange-low-enable")) { + /* Setup MFR1 CONFIG register bit 1 VRANGE_SELECT */ + ret = i2c_smbus_read_word_data(client, LTC4286_MFR_CONFIG1); + if (ret < 0) { + return dev_err_probe( + &client->dev, ret, + "Failed to read manufacturer configuration one\n"); + } + + if ((ret & VRANGE_SELECT_BIT) != VRANGE_25P6) { + ret &= ~VRANGE_SELECT_BIT; /* VRANGE_SELECT = 0, 25.6V */ + ret = i2c_smbus_write_word_data( + client, LTC4286_MFR_CONFIG1, ret); + if (ret < 0) + return dev_err_probe(&client->dev, ret, + "Failed to set vrange\n"); + } + + info->m[PSC_VOLTAGE_IN] = 128; + info->m[PSC_VOLTAGE_OUT] = 128; + info->m[PSC_POWER] = 4 * rsense; + if (info->m[PSC_POWER] > INT_MAX) + return dev_err_probe(&client->dev, -ERANGE, + "Power coefficient overflow\n"); + } else { + info->m[PSC_POWER] = rsense; + if (info->m[PSC_POWER] > INT_MAX) + return dev_err_probe(&client->dev, -ERANGE, + "Power coefficient overflow\n"); + } + + info->m[PSC_CURRENT_OUT] = 1024 * rsense; + if (info->m[PSC_CURRENT_OUT] > INT_MAX) + return dev_err_probe(&client->dev, -ERANGE, + "Current coefficient overflow\n"); + + return pmbus_do_probe(client, info); +} + +static const struct of_device_id ltc4286_of_match[] = { + { .compatible = "lltc,ltc4286" }, + { .compatible = "lltc,ltc4287" }, + {} +}; + +static struct i2c_driver ltc4286_driver = { + .driver = { + .name = "ltc4286", + .of_match_table = ltc4286_of_match, + }, + .probe = ltc4286_probe, + .id_table = ltc4286_id, +}; + +module_i2c_driver(ltc4286_driver); + +MODULE_AUTHOR("Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>"); +MODULE_DESCRIPTION("PMBUS driver for LTC4286 and compatibles"); +MODULE_LICENSE("GPL");
Add a driver to support ltc4286 chip Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> Changelog: v3 - Use dev_err_probe() instead of dev_err() - The VRANGE_SELECT bit only be written if it actually changed - Avoid the info pointer being overwritten - Check the MBR value range to avoid overflow - Revise ltc4286.rst to corrcet description v2 - Revise Linear Technologies LTC4286 to Analog Devices LTC4286 in Kconfig - Add more description for this driver in Kconfig - Add some comments for MBR setting in ltc4286.c - Add ltc4286.rst --- Documentation/hwmon/ltc4286.rst | 95 +++++++++++++++++ drivers/hwmon/pmbus/Kconfig | 9 ++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/ltc4286.c | 178 ++++++++++++++++++++++++++++++++ 4 files changed, 283 insertions(+) create mode 100644 Documentation/hwmon/ltc4286.rst create mode 100644 drivers/hwmon/pmbus/ltc4286.c