diff mbox series

[3/4] configs: meson64: add alternate USB DFU boot target

Message ID 20231023-usb-dfu-boot-v1-3-df9d121c67c1@linaro.org
State Accepted
Commit 4aa027b3f8c1b018ab50570ccf337587cc6178f8
Headers show
Series ARM: meson: Add boot over DFU RAM as an USB boot step | expand

Commit Message

Neil Armstrong Oct. 23, 2023, 12:41 p.m. UTC 
Add boot over DFU RAM as an alternate to running script at
a fixed address like done today.

The main culprit is that it's not possible to do that
on G12A/Sm1 platforms due to changes in the USB boot protocol.

With this, U-Boot will present a DFU device with a ram slot where
the Host could write a fitImage or legacy U-Boot image, then with the
detach command boot will continue trying to boot the uploaded image.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 include/configs/meson64.h | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
diff mbox series

Patch

diff --git a/include/configs/meson64.h b/include/configs/meson64.h
index a64817ec9b..efab9a624d 100644
--- a/include/configs/meson64.h
+++ b/include/configs/meson64.h
@@ -53,6 +53,30 @@ 
 #define BOOTENV_DEV_NAME_ROMUSB(devtypeu, devtypel, instance)	\
 		"romusb "
 
+/*
+ * Fallback to "USB DFU" boot if script is not at scriptaddr
+ *
+ * DFU will expose the kernel_addr_r memory range as DFU entry,
+ * then with `dfu-util --detach`, booting the uploaded image
+ * will be attempted:
+ * $ dfu-util -a 0 -D fitImage
+ * $ dfu-util -a 0 -e
+ */
+#if CONFIG_IS_ENABLED(USB_GADGET) && CONFIG_IS_ENABLED(DFU_RAM)
+	#define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance) \
+		"bootcmd_usbdfu=" \
+			"if test \"${boot_source}\" = \"usb\"; then " \
+				"dfu 0 ram 0 60;" \
+				"bootm ${kernel_addr_r};" \
+			"fi\0"
+
+	#define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance) \
+		"usbdfu "
+#else
+	#define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance)
+	#define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance)
+#endif
+
 #ifdef CONFIG_CMD_USB
 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 #else
@@ -74,6 +98,7 @@ 
 #ifndef BOOT_TARGET_DEVICES
 #define BOOT_TARGET_DEVICES(func) \
 	func(ROMUSB, romusb, na)  \
+	func(USB_DFU, usbdfu, na)  \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 2) \
@@ -109,6 +134,7 @@ 
 	"fdtoverlay_addr_r=" FDTOVERLAY_ADDR_R "\0" \
 	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
 	"fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	"dfu_alt_info=fitimage ram " KERNEL_ADDR_R " 0x4000000 \0" \
 	BOOTENV
 #endif