@@ -60,6 +60,18 @@ OPTIONS
Note: If user explicitly sets options which conflict with the params,
the value set by the params will be overridden.
+ Also not defined in .../<pmu>/format/* are PMU driver specific
+ configuration parameters. Any configuration parameter preceded by
+ the letter '@' is not interpreted in user space and sent down directly
+ to the PMU driver. For example:
+
+ perf record -e some_event/@cfg1,@cfg2=config/ ...
+
+ will see 'cfg1' and 'cfg2=config' pushed to the PMU driver associated
+ with the event for further processing. There is no restriction on
+ what the configuration parameters are, as long as their semantic is
+ understood and supported by the PMU driver.
+
- a hardware breakpoint event in the form of '\mem:addr[/len][:access]'
where addr is the address in memory you want to break in.
Access is the memory access type (read, write, execute) it can
@@ -46,6 +46,7 @@ enum {
PERF_EVSEL__CONFIG_TERM_INHERIT,
PERF_EVSEL__CONFIG_TERM_MAX_STACK,
PERF_EVSEL__CONFIG_TERM_OVERWRITE,
+ PERF_EVSEL__CONFIG_TERM_DRV_CFG,
PERF_EVSEL__CONFIG_TERM_MAX,
};
@@ -57,6 +58,7 @@ struct perf_evsel_config_term {
u64 freq;
bool time;
char *callgraph;
+ char *drv_cfg;
u64 stack_user;
int max_stack;
bool inherit;
@@ -904,6 +904,7 @@ static const char *config_term_names[__PARSE_EVENTS__TERM_TYPE_NR] = {
[PARSE_EVENTS__TERM_TYPE_MAX_STACK] = "max-stack",
[PARSE_EVENTS__TERM_TYPE_OVERWRITE] = "overwrite",
[PARSE_EVENTS__TERM_TYPE_NOOVERWRITE] = "no-overwrite",
+ [PARSE_EVENTS__TERM_TYPE_DRV_CFG] = "driver-config",
};
static bool config_term_shrinked;
@@ -1034,7 +1035,8 @@ static int config_term_pmu(struct perf_event_attr *attr,
struct parse_events_term *term,
struct parse_events_error *err)
{
- if (term->type_term == PARSE_EVENTS__TERM_TYPE_USER)
+ if (term->type_term == PARSE_EVENTS__TERM_TYPE_USER ||
+ term->type_term == PARSE_EVENTS__TERM_TYPE_DRV_CFG)
/*
* Always succeed for sysfs terms, as we dont know
* at this point what type they need to have.
@@ -1134,6 +1136,9 @@ do { \
case PARSE_EVENTS__TERM_TYPE_NOOVERWRITE:
ADD_CONFIG_TERM(OVERWRITE, overwrite, term->val.num ? 0 : 1);
break;
+ case PARSE_EVENTS__TERM_TYPE_DRV_CFG:
+ ADD_CONFIG_TERM(DRV_CFG, drv_cfg, term->val.str);
+ break;
default:
break;
}
@@ -71,6 +71,7 @@ enum {
PARSE_EVENTS__TERM_TYPE_MAX_STACK,
PARSE_EVENTS__TERM_TYPE_NOOVERWRITE,
PARSE_EVENTS__TERM_TYPE_OVERWRITE,
+ PARSE_EVENTS__TERM_TYPE_DRV_CFG,
__PARSE_EVENTS__TERM_TYPE_NR,
};
@@ -53,6 +53,26 @@ static int str(yyscan_t scanner, int token)
return token;
}
+/*
+ * This function is called when the parser gets two kind of input:
+ *
+ * @cfg1 or @cfg2=config
+ *
+ * The leading '@' is stripped off before 'cfg1' and 'cfg2=config' are given to
+ * bison. In the latter case it is necessary to keep the string intact so that
+ * the PMU kernel driver can determine what configurable is associated to
+ * 'config'.
+ */
+static int drv_str(yyscan_t scanner, int token)
+{
+ YYSTYPE *yylval = parse_events_get_lval(scanner);
+ char *text = parse_events_get_text(scanner);
+
+ /* Strip off the '@' */
+ yylval->str = strdup(text + 1);
+ return token;
+}
+
#define REWIND(__alloc) \
do { \
YYSTYPE *__yylval = parse_events_get_lval(yyscanner); \
@@ -124,6 +144,7 @@ num_hex 0x[a-fA-F0-9]+
num_raw_hex [a-fA-F0-9]+
name [a-zA-Z_*?][a-zA-Z0-9_*?.]*
name_minus [a-zA-Z_*?][a-zA-Z0-9\-_*?.:]*
+drv_cfg_term [a-zA-Z0-9_\.]+(=[a-zA-Z0-9_*?\.:]+)?
/* If you add a modifier you need to update check_modifier() */
modifier_event [ukhpPGHSDI]+
modifier_bp [rwx]{1,3}
@@ -209,6 +230,7 @@ no-overwrite { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_NOOVERWRITE); }
{name_minus} { return str(yyscanner, PE_NAME); }
\[all\] { return PE_ARRAY_ALL; }
"[" { BEGIN(array); return '['; }
+@{drv_cfg_term} { return drv_str(yyscanner, PE_DRV_CFG_TERM); }
}
<mem>{
@@ -49,6 +49,7 @@ static void inc_group_count(struct list_head *list,
%token PE_ERROR
%token PE_PMU_EVENT_PRE PE_PMU_EVENT_SUF PE_KERNEL_PMU_EVENT
%token PE_ARRAY_ALL PE_ARRAY_RANGE
+%token PE_DRV_CFG_TERM
%type <num> PE_VALUE
%type <num> PE_VALUE_SYM_HW
%type <num> PE_VALUE_SYM_SW
@@ -63,6 +64,7 @@ static void inc_group_count(struct list_head *list,
%type <str> PE_MODIFIER_BP
%type <str> PE_EVENT_NAME
%type <str> PE_PMU_EVENT_PRE PE_PMU_EVENT_SUF PE_KERNEL_PMU_EVENT
+%type <str> PE_DRV_CFG_TERM
%type <num> value_sym
%type <head> event_config
%type <head> opt_event_config
@@ -599,6 +601,15 @@ PE_NAME array '=' PE_VALUE
term->array = $2;
$$ = term;
}
+|
+PE_DRV_CFG_TERM
+{
+ struct parse_events_term *term;
+
+ ABORT_ON(parse_events_term__str(&term, PARSE_EVENTS__TERM_TYPE_DRV_CFG,
+ $1, $1, &@1, NULL));
+ $$ = term;
+}
array:
'[' array_terms ']'
This patch adds PMU driver specific configuration to the parser infrastructure by preceding any term with the '@' letter. As such doing something like: perf record -e some_event/@cfg1,@cfg2=config/ ... will see 'cfg1' and 'cfg2=config' being added to the list of evsel config terms. Token 'cfg1' and 'cfg2=config' are not processed in user space and are meant to be interpreted by the PMU driver. First the lexer/parser are supplemented with the required definitions to recognise the driver specific configuration. From there they are simply added to the list of event terms. The bulk of the work is done in function "parse_events_add_pmu()" where driver config event terms are added to a new list of driver config terms, which in turn spliced with the event's new driver configuration list. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> --- tools/perf/Documentation/perf-record.txt | 12 ++++++++++++ tools/perf/util/evsel.h | 2 ++ tools/perf/util/parse-events.c | 7 ++++++- tools/perf/util/parse-events.h | 1 + tools/perf/util/parse-events.l | 22 ++++++++++++++++++++++ tools/perf/util/parse-events.y | 11 +++++++++++ 6 files changed, 54 insertions(+), 1 deletion(-) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel