diff mbox series

[v2,5/7] riscv: dts: sophgo: cv180x: Add gpio devices

Message ID IA1PR20MB4953F4BA74C7E9F011C88166BBCEA@IA1PR20MB4953.namprd20.prod.outlook.com
State Superseded
Headers show
Series Add Huashan Pi board support | expand

Commit Message

Inochi Amaoto Oct. 9, 2023, 11:26 a.m. UTC 
Add common GPIO devices for the CV180x and CV181x soc.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
---
 arch/riscv/boot/dts/sophgo/cv180x.dtsi | 72 ++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

--
2.42.0

Comments

Chen Wang Oct. 12, 2023, 12:52 p.m. UTC | #1 
On 2023/10/9 19:26, Inochi Amaoto wrote:
> Add common GPIO devices for the CV180x and CV181x soc.
>
> Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
> ---
>   arch/riscv/boot/dts/sophgo/cv180x.dtsi | 72 ++++++++++++++++++++++++++
>   1 file changed, 72 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> index ffaf51724c98..64ffb23d3626 100644
> --- a/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> @@ -53,6 +53,78 @@ soc {
>   		dma-noncoherent;
>   		ranges;
>
> +		gpio0: gpio@3020000 {
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0x3020000 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			porta: gpio-controller@0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				ngpios = <32>;
> +				reg = <0>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};
> +
> +		gpio1: gpio@3021000 {
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0x3021000 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			portb: gpio-controller@0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				ngpios = <32>;
> +				reg = <0>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};
> +
> +		gpio2: gpio@3022000 {
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0x3022000 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			portc: gpio-controller@0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				ngpios = <32>;
> +				reg = <0>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};
> +
> +		gpio3: gpio@3023000 {
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0x3023000 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			portd: gpio-controller@0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				ngpios = <32>;
> +				reg = <0>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};
> +
>   		uart0: serial@4140000 {
>   			compatible = "snps,dw-apb-uart";
>   			reg = <0x04140000 0x100>;
LGTM

Acked-by: Chen Wang <unicorn_wang@outlook.com>

Thanks,

Chen


> --
> 2.42.0
>
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
index ffaf51724c98..64ffb23d3626 100644
--- a/arch/riscv/boot/dts/sophgo/cv180x.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
@@ -53,6 +53,78 @@  soc {
 		dma-noncoherent;
 		ranges;

+		gpio0: gpio@3020000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3020000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@3021000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3021000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@3022000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3022000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio3: gpio@3023000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3023000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portd: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		uart0: serial@4140000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04140000 0x100>;