@@ -19,11 +19,10 @@
#include <linux/platform_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include <linux/reset.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/delay.h>
@@ -859,7 +858,7 @@ static int
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
struct device *dev)
{
- const struct of_device_id *device;
+ const struct mv64xxx_i2c_regs *data;
struct device_node *np = dev->of_node;
u32 bus_freq, tclk;
int rc = 0;
@@ -897,11 +896,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
*/
drv_data->adapter.timeout = HZ;
- device = of_match_device(mv64xxx_i2c_of_match_table, dev);
- if (!device)
+ data = device_get_match_data(dev);
+ if (!data)
return -ENODEV;
- memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
+ memcpy(&drv_data->reg_offsets, data, sizeof(drv_data->reg_offsets));
/*
* For controllers embedded in new SoCs activate the
@@ -25,11 +25,11 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/platform_data/i2c-omap.h>
#include <linux/pm_runtime.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/property.h>
/* I2C controller revisions */
#define OMAP_I2C_OMAP1_REV_2 0x20
@@ -1358,7 +1358,6 @@ omap_i2c_probe(struct platform_device *pdev)
const struct omap_i2c_bus_platform_data *pdata =
dev_get_platdata(&pdev->dev);
struct device_node *node = pdev->dev.of_node;
- const struct of_device_id *match;
int irq;
int r;
u32 rev;
@@ -1376,11 +1375,10 @@ omap_i2c_probe(struct platform_device *pdev)
if (IS_ERR(omap->base))
return PTR_ERR(omap->base);
- match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
- if (match) {
+ if (pdev->dev.of_node) {
u32 freq = I2C_MAX_STANDARD_MODE_FREQ;
- pdata = match->data;
+ pdata = device_get_match_data(&pdev->dev);
omap->flags = pdata->flags;
of_property_read_u32(node, "clock-frequency", &freq);
@@ -32,6 +32,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/platform_data/i2c-pxa.h>
+#include <linux/property.h>
#include <linux/slab.h>
/* I2C register field definitions */
@@ -1252,10 +1253,8 @@ static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
enum pxa_i2c_types *i2c_types)
{
struct device_node *np = pdev->dev.of_node;
- const struct of_device_id *of_id =
- of_match_device(i2c_pxa_dt_ids, &pdev->dev);
- if (!of_id)
+ if (!pdev->dev.of_node)
return 1;
/* For device tree we always use the dynamic or alias-assigned ID */
@@ -1264,7 +1263,7 @@ static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
i2c->use_pio = of_property_read_bool(np, "mrvl,i2c-polling");
i2c->fast_mode = of_property_read_bool(np, "mrvl,i2c-fast-mode");
- *i2c_types = (enum pxa_i2c_types)(of_id->data);
+ *i2c_types = (enum pxa_i2c_types)device_get_match_data(&pdev->dev);
return 0;
}
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> --- drivers/i2c/busses/i2c-mv64xxx.c | 11 +++++------ drivers/i2c/busses/i2c-omap.c | 8 +++----- drivers/i2c/busses/i2c-pxa.c | 7 +++---- 3 files changed, 11 insertions(+), 15 deletions(-)