@@ -37,7 +37,11 @@
#define PIPE3_PHYSTATUS_SW BIT(3)
#define PIPE_UTMI_CLK_DIS BIT(8)
-#define PWR_EVNT_IRQ_STAT_REG 0x58
+#define PWR_EVNT_IRQ1_STAT_REG 0x58
+#define PWR_EVNT_IRQ2_STAT_REG 0x1dc
+#define PWR_EVNT_IRQ3_STAT_REG 0x228
+#define PWR_EVNT_IRQ4_STAT_REG 0x238
+
#define PWR_EVNT_LPM_IN_L2_MASK BIT(4)
#define PWR_EVNT_LPM_OUT_L2_MASK BIT(5)
@@ -107,6 +111,19 @@ struct dwc3_qcom {
int num_ports;
};
+/*
+ * Currently non-multiport controller have only one PWR_EVENT_IRQ register,
+ * but multiport controllers like SA8295 contain upto 4 of them.
+ */
+#define NUM_PWR_EVENT_STAT_REGS 4
+
+static u32 pwr_evnt_irq_stat_reg_offset[NUM_PWR_EVENT_STAT_REGS] = {
+ PWR_EVNT_IRQ1_STAT_REG,
+ PWR_EVNT_IRQ2_STAT_REG,
+ PWR_EVNT_IRQ3_STAT_REG,
+ PWR_EVNT_IRQ4_STAT_REG,
+};
+
static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
{
u32 reg;
@@ -446,9 +463,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
if (qcom->is_suspended)
return 0;
- val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
- if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
- dev_err(qcom->dev, "HS-PHY not in L2\n");
+ for (i = 0; i < qcom->num_ports; i++) {
+ val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg_offset[i]);
+ if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
+ dev_err(qcom->dev, "HS-PHY not in L2\n");
+ }
for (i = qcom->num_clocks - 1; i >= 0; i--)
clk_disable_unprepare(qcom->clks[i]);
@@ -494,9 +513,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
/* Clear existing events from PHY related to L2 in/out */
- dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
- PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
-
+ for (i = 0; i < qcom->num_ports; i++) {
+ dwc3_qcom_setbits(qcom->qscratch_base,
+ pwr_evnt_irq_stat_reg_offset[i],
+ PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+ }
qcom->is_suspended = false;
return 0;
QCOM SoC SA8295P's tertiary quad port controller supports 2 HS+SS ports and 2 HS only ports. Add support for configuring PWR_EVENT_IRQ's for all the ports during suspend/resume. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> --- drivers/usb/dwc3/dwc3-qcom.c | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-)