| Message ID | 20231007154806.605-2-quic_kriskura@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add multiport support for DWC3 controllers | expand |
On Sat, Oct 07, 2023 at 09:17:57PM +0530, Krishna Kurapati wrote: > Currently host-only capable DWC3 controllers support Multiport. You use the word "currently" in a few places like this (e.g. in comments in the code). What exactly do you mean? That all current multiport controllers are host-only, or that this is all that the driver supports after your changes? Please rephrase accordingly throughout so that this becomes clear. In any case it looks like the above sentence is at least missing an "only". > +static int dwc3_read_port_info(struct dwc3 *dwc) > +{ > + void __iomem *base; > + u8 major_revision; > + u32 offset = 0; I'd move the initialisation just before the loop. > + u32 val; > + > + /* > + * Remap xHCI address space to access XHCI ext cap regs, Drop comma and merge with next line and break it closer to 80 chars (instead of 65). > + * since it is needed to get port info. s/since it is needed to get/which hold the/? > + */ > + base = ioremap(dwc->xhci_resources[0].start, > + resource_size(&dwc->xhci_resources[0])); > + if (IS_ERR(base)) > + return PTR_ERR(base); > + > + do { > + offset = xhci_find_next_ext_cap(base, offset, > + XHCI_EXT_CAPS_PROTOCOL); > + if (!offset) > + break; > + > + val = readl(base + offset); > + major_revision = XHCI_EXT_PORT_MAJOR(val); > + > + val = readl(base + offset + 0x08); > + if (major_revision == 0x03) { > + dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val); > + } else if (major_revision <= 0x02) { > + dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val); > + } else { > + dev_err(dwc->dev, This should be dev_warn() (as in the xhci driver) now that you no longer treat it as a fatal error. > + "Unrecognized port major revision %d\n", Merge this with the previous line (even if it makes that line 83 chars). Use a lower case 'U' for consistency with most of the error messages. > + major_revision); > + } > + } while (1); > + > + dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n", > + dwc->num_usb2_ports, dwc->num_usb3_ports); > + > + iounmap(base); > + > + return 0; > +} > + > static int dwc3_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > @@ -1846,6 +1892,7 @@ static int dwc3_probe(struct platform_device *pdev) > void __iomem *regs; > struct dwc3 *dwc; > int ret; > + unsigned int hw_mode; Nit: I'd place this one before ret. > > dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL); > if (!dwc) > @@ -1926,6 +1973,20 @@ static int dwc3_probe(struct platform_device *pdev) > goto err_disable_clks; > } > > + /* > + * Currently only DWC3 controllers that are host-only capable > + * support Multiport. > + */ So is this is a limitation of the hardware or implementation? > + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); > + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) { > + ret = dwc3_read_port_info(dwc); > + if (ret) > + goto err_disable_clks; > + } else { > + dwc->num_usb2_ports = 1; > + dwc->num_usb3_ports = 1; > + } > + > spin_lock_init(&dwc->lock); > mutex_init(&dwc->mutex); Johan
On 10/20/2023 2:02 PM, Johan Hovold wrote: > On Sat, Oct 07, 2023 at 09:17:57PM +0530, Krishna Kurapati wrote: >> Currently host-only capable DWC3 controllers support Multiport. > > You use the word "currently" in a few places like this (e.g. in comments > in the code). What exactly do you mean? That all current multiport > controllers are host-only, or that this is all that the driver supports > after your changes? > This means that, today the capable multiport controllers are host-only capable, not that the driver is designed that way. > Please rephrase accordingly throughout so that this becomes clear. > > In any case it looks like the above sentence is at least missing an > "only". > >> +static int dwc3_read_port_info(struct dwc3 *dwc) >> +{ >> + void __iomem *base; >> + u8 major_revision; >> + u32 offset = 0; > > I'd move the initialisation just before the loop. > >> + u32 val; >> + >> + /* >> + * Remap xHCI address space to access XHCI ext cap regs, > > Drop comma and merge with next line and break it closer to 80 chars > (instead of 65). > >> + * since it is needed to get port info. > > s/since it is needed to get/which hold the/? > >> + */ >> + base = ioremap(dwc->xhci_resources[0].start, >> + resource_size(&dwc->xhci_resources[0])); >> + if (IS_ERR(base)) >> + return PTR_ERR(base); >> + >> + do { >> + offset = xhci_find_next_ext_cap(base, offset, >> + XHCI_EXT_CAPS_PROTOCOL); >> + if (!offset) >> + break; >> + >> + val = readl(base + offset); >> + major_revision = XHCI_EXT_PORT_MAJOR(val); >> + >> + val = readl(base + offset + 0x08); >> + if (major_revision == 0x03) { >> + dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val); >> + } else if (major_revision <= 0x02) { >> + dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val); >> + } else { >> + dev_err(dwc->dev, > > This should be dev_warn() (as in the xhci driver) now that you no longer > treat it as a fatal error. > >> + "Unrecognized port major revision %d\n", > > Merge this with the previous line (even if it makes that line 83 chars). > > Use a lower case 'U' for consistency with most of the error messages. > Sure, will change this to dev_warn and modify the "u". >> + major_revision); >> + } >> + } while (1); >> + >> + dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n", >> + dwc->num_usb2_ports, dwc->num_usb3_ports); >> + >> + iounmap(base); >> + >> + return 0; >> +} >> + >> static int dwc3_probe(struct platform_device *pdev) >> { >> struct device *dev = &pdev->dev; >> @@ -1846,6 +1892,7 @@ static int dwc3_probe(struct platform_device *pdev) >> void __iomem *regs; >> struct dwc3 *dwc; >> int ret; >> + unsigned int hw_mode; > > Nit: I'd place this one before ret. > >> >> dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL); >> if (!dwc) >> @@ -1926,6 +1973,20 @@ static int dwc3_probe(struct platform_device *pdev) >> goto err_disable_clks; >> } >> >> + /* >> + * Currently only DWC3 controllers that are host-only capable >> + * support Multiport. >> + */ > > So is this is a limitation of the hardware or implementation? > This is how the hardware is implemented today. I wanted to convey that "lets check for host-only condition before going for reading port info" >> + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); >> + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) { >> + ret = dwc3_read_port_info(dwc); >> + if (ret) >> + goto err_disable_clks; >> + } else { >> + dwc->num_usb2_ports = 1; >> + dwc->num_usb3_ports = 1; >> + } >> + >> spin_lock_init(&dwc->lock); >> mutex_init(&dwc->mutex); > > Johan >
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 44ee8526dc28..d7c5669ebd06 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -39,6 +39,7 @@ #include "io.h" #include "debug.h" +#include "../host/xhci-ext-caps.h" #define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */ @@ -1839,6 +1840,51 @@ static int dwc3_get_clocks(struct dwc3 *dwc) return 0; } +static int dwc3_read_port_info(struct dwc3 *dwc) +{ + void __iomem *base; + u8 major_revision; + u32 offset = 0; + u32 val; + + /* + * Remap xHCI address space to access XHCI ext cap regs, + * since it is needed to get port info. + */ + base = ioremap(dwc->xhci_resources[0].start, + resource_size(&dwc->xhci_resources[0])); + if (IS_ERR(base)) + return PTR_ERR(base); + + do { + offset = xhci_find_next_ext_cap(base, offset, + XHCI_EXT_CAPS_PROTOCOL); + if (!offset) + break; + + val = readl(base + offset); + major_revision = XHCI_EXT_PORT_MAJOR(val); + + val = readl(base + offset + 0x08); + if (major_revision == 0x03) { + dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val); + } else if (major_revision <= 0x02) { + dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val); + } else { + dev_err(dwc->dev, + "Unrecognized port major revision %d\n", + major_revision); + } + } while (1); + + dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n", + dwc->num_usb2_ports, dwc->num_usb3_ports); + + iounmap(base); + + return 0; +} + static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1846,6 +1892,7 @@ static int dwc3_probe(struct platform_device *pdev) void __iomem *regs; struct dwc3 *dwc; int ret; + unsigned int hw_mode; dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL); if (!dwc) @@ -1926,6 +1973,20 @@ static int dwc3_probe(struct platform_device *pdev) goto err_disable_clks; } + /* + * Currently only DWC3 controllers that are host-only capable + * support Multiport. + */ + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) { + ret = dwc3_read_port_info(dwc); + if (ret) + goto err_disable_clks; + } else { + dwc->num_usb2_ports = 1; + dwc->num_usb3_ports = 1; + } + spin_lock_init(&dwc->lock); mutex_init(&dwc->mutex); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 6782ec8bfd64..2ea6df7e6571 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1031,6 +1031,8 @@ struct dwc3_scratchpad_array { * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY * @usb3_generic_phy: pointer to USB3 PHY + * @num_usb2_ports: number of USB2 ports + * @num_usb3_ports: number of USB3 ports * @phys_ready: flag to indicate that PHYs are ready * @ulpi: pointer to ulpi interface * @ulpi_ready: flag to indicate that ULPI is initialized @@ -1174,6 +1176,9 @@ struct dwc3 { struct phy *usb2_generic_phy; struct phy *usb3_generic_phy; + u8 num_usb2_ports; + u8 num_usb3_ports; + bool phys_ready; struct ulpi *ulpi;
Currently host-only capable DWC3 controllers support Multiport. Temporarily map XHCI address space for host-only controllers and parse XHCI Extended Capabilities registers to read number of usb2 ports and usb3 ports present on multiport controller. Each USB Port is at least HS capable. The port info for usb2 and usb3 phy are identified as num_usb2_ports and num_usb3_ports. The intention is as follows: Wherever we need to perform phy operations like: LOOP_OVER_NUMBER_OF_AVAILABLE_PORTS() { phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); } If number of usb2 ports is 3, loop can go from index 0-2 for usb2_generic_phy. If number of usb3-ports is 2, we don't know for sure, if the first 2 ports are SS capable or some other ports like (2 and 3) are SS capable. So instead, num_usb2_ports is used to loop around all phy's (both hs and ss) for performing phy operations. If any usb3_generic_phy turns out to be NULL, phy operation just bails out. num_usb3_ports is used to modify GUSB3PIPECTL registers while setting up phy's as we need to know how many SS capable ports are there for this. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> --- drivers/usb/dwc3/core.c | 61 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 5 ++++ 2 files changed, 66 insertions(+)