diff mbox series

[v4,1/6] dt-bindings: ufs: common: add OPP table

Message ID 20231003111232.42663-2-manivannan.sadhasivam@linaro.org
State New
Headers show
Series UFS: Add OPP support | expand

Commit Message

Manivannan Sadhasivam Oct. 3, 2023, 11:12 a.m. UTC
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Except scaling UFS and bus clocks, it's necessary to scale also the
voltages of regulators or power domain performance state levels.  Adding
Operating Performance Points table allows to adjust power domain
performance state, depending on the UFS clock speed.

OPPv2 deprecates previous property limited to clock scaling:
freq-table-hz.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 .../devicetree/bindings/ufs/ufs-common.yaml   | 36 ++++++++++++++++---
 1 file changed, 32 insertions(+), 4 deletions(-)

Comments

Rob Herring (Arm) Oct. 3, 2023, 12:16 p.m. UTC | #1
On Tue, 03 Oct 2023 16:42:27 +0530, Manivannan Sadhasivam wrote:
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Except scaling UFS and bus clocks, it's necessary to scale also the
> voltages of regulators or power domain performance state levels.  Adding
> Operating Performance Points table allows to adjust power domain
> performance state, depending on the UFS clock speed.
> 
> OPPv2 deprecates previous property limited to clock scaling:
> freq-table-hz.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  .../devicetree/bindings/ufs/ufs-common.yaml   | 36 ++++++++++++++++---
>  1 file changed, 32 insertions(+), 4 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/ufs/ufs-common.yaml:90:20: [error] string value is redundantly quoted with any quotes (quoted-strings)
./Documentation/devicetree/bindings/ufs/ufs-common.yaml:91:26: [error] string value is redundantly quoted with any quotes (quoted-strings)
./Documentation/devicetree/bindings/ufs/ufs-common.yaml:91:36: [error] string value is redundantly quoted with any quotes (quoted-strings)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231003111232.42663-2-manivannan.sadhasivam@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
index bbaee4f5f7b2..d7d2c8a136bb 100644
--- a/Documentation/devicetree/bindings/ufs/ufs-common.yaml
+++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
@@ -20,11 +20,24 @@  properties:
       items:
         - description: Minimum frequency for given clock in Hz
         - description: Maximum frequency for given clock in Hz
+    deprecated: true
     description: |
+      Preferred is operating-points-v2.
+
       Array of <min max> operating frequencies in Hz stored in the same order
-      as the clocks property. If this property is not defined or a value in the
-      array is "0" then it is assumed that the frequency is set by the parent
-      clock or a fixed rate clock source.
+      as the clocks property. If either this property or operating-points-v2 is
+      not defined or a value in the array is "0" then it is assumed that the
+      frequency is set by the parent clock or a fixed rate clock source.
+
+  operating-points-v2:
+    description:
+      Preferred over freq-table-hz.
+      If present, each OPP must contain array of frequencies stored in the same
+      order for each clock.  If clock frequency in the array is "0" then it is
+      assumed that the frequency is set by the parent clock or a fixed rate
+      clock source.
+
+  opp-table: true
 
   interrupts:
     maxItems: 1
@@ -74,9 +87,24 @@  properties:
       Specifies max. load that can be drawn from VCCQ2 supply.
 
 dependencies:
-  freq-table-hz: [ clocks ]
+  freq-table-hz: [ 'clocks' ]
+  operating-points-v2: [ 'clocks', 'clock-names' ]
 
 required:
   - interrupts
 
+allOf:
+  - if:
+      required:
+        - freq-table-hz
+    then:
+      properties:
+        operating-points-v2: false
+  - if:
+      required:
+        - operating-points-v2
+    then:
+      properties:
+        freq-table-hz: false
+
 additionalProperties: true