diff mbox

cputlb: make tlb_reset_dirty safe for MTTCG

Message ID 87vazsjy2y.fsf@linaro.org
State Superseded
Headers show

Commit Message

Alex Bennée July 26, 2016, 2:03 p.m. UTC
The main use case for tlb_reset_dirty is to set the TLB_NOTDIRTY flags
in TLB entries to force the slow-path on writes. This is used to mark
page ranges containing code which has been translated so it can be
invalidated if written to. To do this safely we need to ensure the TLB
entries in question for all vCPUs are updated before we attempt to run
the code otherwise a race could be introduced.

To achieve this we atomically set the flag in tlb_reset_dirty_range and
take care when setting it when the TLB entry is filled.

The helper function is made static as it isn't used outside of cputlb.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

---
 cputlb.c              | 57 ++++++++++++++++++++++++++++++++++++---------------
 include/exec/cputlb.h |  2 --
 2 files changed, 40 insertions(+), 19 deletions(-)

--
2.7.4
diff mbox

Patch

diff --git a/cputlb.c b/cputlb.c
index e0d5bdd..e7b6a08 100644
--- a/cputlb.c
+++ b/cputlb.c
@@ -275,32 +275,52 @@  void tlb_unprotect_code(ram_addr_t ram_addr)
     cpu_physical_memory_set_dirty_flag(ram_addr, DIRTY_MEMORY_CODE);
 }

-static bool tlb_is_dirty_ram(CPUTLBEntry *tlbe)
-{
-    return (tlbe->addr_write & (TLB_INVALID_MASK|TLB_MMIO|TLB_NOTDIRTY)) == 0;
-}

-void tlb_reset_dirty_range(CPUTLBEntry *tlb_entry, uintptr_t start,
+/*
+ * Dirty write flag handling
+ *
+ * When the TCG code writes to a location it looks up the address in
+ * the TLB and uses that data to compute the final address. If any of
+ * the lower bits of the address are set then the slow path is forced.
+ * There are a number of reasons to do this but for normal RAM the
+ * most usual is detecting writes to code regions which may invalidate
+ * generated code.
+ *
+ * Because we want other vCPUs to respond to changes straight away we
+ * update the te->addr_write field atomically. If the TLB entry has
+ * been changed by the vCPU in the mean time we skip the update.
+ */
+
+static void tlb_reset_dirty_range(CPUTLBEntry *tlb_entry, uintptr_t start,
                            uintptr_t length)
 {
-    uintptr_t addr;
+    /* paired with atomic_mb_set in tlb_set_page_with_attrs */
+    uintptr_t orig_addr = atomic_mb_read(&tlb_entry->addr_write);
+    uintptr_t addr = orig_addr;

-    if (tlb_is_dirty_ram(tlb_entry)) {
-        addr = (tlb_entry->addr_write & TARGET_PAGE_MASK) + tlb_entry->addend;
+    if ((addr & (TLB_INVALID_MASK|TLB_MMIO|TLB_NOTDIRTY)) == 0) {
+        addr &= TARGET_PAGE_MASK;
+        addr += atomic_read(&tlb_entry->addend);
         if ((addr - start) < length) {
-            tlb_entry->addr_write |= TLB_NOTDIRTY;
+            uintptr_t notdirty_addr = orig_addr | TLB_NOTDIRTY;
+            if (!atomic_bool_cmpxchg(&tlb_entry->addr_write, orig_addr, notdirty_addr)) {
+                fprintf(stderr,"%s: raced setting the flag\n", __func__);
+            }
         }
     }
 }

+/* This is a cross vCPU call (i.e. another vCPU resetting the flags of
+ * the target vCPU). As such care needs to be taken that we don't
+ * dangerously race with another vCPU update. The only thing actually
+ * updated is the target TLB entry ->addr_write flags.
+ */
 void tlb_reset_dirty(CPUState *cpu, ram_addr_t start1, ram_addr_t length)
 {
     CPUArchState *env;

     int mmu_idx;

-    assert_cpu_is_self(cpu);
-
     env = cpu->env_ptr;
     for (mmu_idx = 0; mmu_idx < NB_MMU_MODES; mmu_idx++) {
         unsigned int i;
@@ -386,7 +406,7 @@  void tlb_set_page_with_attrs(CPUState *cpu, target_ulong vaddr,
     MemoryRegionSection *section;
     unsigned int index;
     target_ulong address;
-    target_ulong code_address;
+    target_ulong code_address, write_address;
     uintptr_t addend;
     CPUTLBEntry *te;
     hwaddr iotlb, xlat, sz;
@@ -443,21 +463,24 @@  void tlb_set_page_with_attrs(CPUState *cpu, target_ulong vaddr,
     } else {
         te->addr_code = -1;
     }
+
+    write_address = -1;
     if (prot & PAGE_WRITE) {
         if ((memory_region_is_ram(section->mr) && section->readonly)
             || memory_region_is_romd(section->mr)) {
             /* Write access calls the I/O callback.  */
-            te->addr_write = address | TLB_MMIO;
+            write_address = address | TLB_MMIO;
         } else if (memory_region_is_ram(section->mr)
                    && cpu_physical_memory_is_clean(
                         memory_region_get_ram_addr(section->mr) + xlat)) {
-            te->addr_write = address | TLB_NOTDIRTY;
+            write_address = address | TLB_NOTDIRTY;
         } else {
-            te->addr_write = address;
+            write_address = address;
         }
-    } else {
-        te->addr_write = -1;
     }
+
+    /* Pairs with flag setting in tlb_reset_dirty_range */
+    atomic_mb_set(&te->addr_write, write_address);
 }

 /* Add a new TLB entry, but without specifying the memory
diff --git a/include/exec/cputlb.h b/include/exec/cputlb.h
index d454c00..3f94178 100644
--- a/include/exec/cputlb.h
+++ b/include/exec/cputlb.h
@@ -23,8 +23,6 @@ 
 /* cputlb.c */
 void tlb_protect_code(ram_addr_t ram_addr);
 void tlb_unprotect_code(ram_addr_t ram_addr);
-void tlb_reset_dirty_range(CPUTLBEntry *tlb_entry, uintptr_t start,
-                           uintptr_t length);
 extern int tlb_flush_count;

 #endif