diff mbox series

[v2,03/28] clk: renesas: rzg2l: lock around writes to mux register

Message ID 20230929053915.1530607-4-claudiu.beznea@bp.renesas.com
State New
Headers show
Series Add new Renesas RZ/G3S SoC and RZ/G3S SMARC EVK | expand

Commit Message

Claudiu Sept. 29, 2023, 5:38 a.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

SD MUX output (SD0) is further divided by 4 in G2{L, UL}. The divided
clock is SD0_DIV4. SD0_DIV4 is registered with CLK_SET_RATE_PARENT which
means a rate request for it is propagated to the MUX and could reach
rzg2l_cpg_sd_clk_mux_set_parent() concurrently with the users of SD0.
Add proper locking to avoid concurrent access on SD MUX set rate
registers.

Fixes: eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v2:
- adapted delay_us to 10us
- adapted CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US to 200us; tested
  with this adjustements on RZ/G3S and RZ/G2L SoCs

 drivers/clk/renesas/rzg2l-cpg.c | 23 +++++++++++++----------
 drivers/clk/renesas/rzg2l-cpg.h |  2 +-
 2 files changed, 14 insertions(+), 11 deletions(-)

Comments

Geert Uytterhoeven Oct. 3, 2023, 3:18 p.m. UTC | #1 
On Fri, Sep 29, 2023 at 7:39 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> SD MUX output (SD0) is further divided by 4 in G2{L, UL}. The divided
> clock is SD0_DIV4. SD0_DIV4 is registered with CLK_SET_RATE_PARENT which
> means a rate request for it is propagated to the MUX and could reach
> rzg2l_cpg_sd_clk_mux_set_parent() concurrently with the users of SD0.
> Add proper locking to avoid concurrent access on SD MUX set rate
> registers.
>
> Fixes: eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support")
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---
>
> Changes in v2:
> - adapted delay_us to 10us
> - adapted CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US to 200us; tested
>   with this adjustements on RZ/G3S and RZ/G2L SoCs

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-clk-for-v6.7.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index 5343d04fd70d..0679f2c7649e 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -189,6 +189,7 @@  static int rzg2l_cpg_sd_clk_mux_set_parent(struct clk_hw *hw, u8 index)
 	u32 shift = GET_SHIFT(hwdata->conf);
 	const u32 clk_src_266 = 2;
 	u32 msk, val, bitmask;
+	unsigned long flags;
 	int ret;
 
 	/*
@@ -204,23 +205,25 @@  static int rzg2l_cpg_sd_clk_mux_set_parent(struct clk_hw *hw, u8 index)
 	 */
 	bitmask = (GENMASK(GET_WIDTH(hwdata->conf) - 1, 0) << shift) << 16;
 	msk = off ? CPG_CLKSTATUS_SELSDHI1_STS : CPG_CLKSTATUS_SELSDHI0_STS;
+	spin_lock_irqsave(&priv->rmw_lock, flags);
 	if (index != clk_src_266) {
 		writel(bitmask | ((clk_src_266 + 1) << shift), priv->base + off);
 
-		ret = readl_poll_timeout(priv->base + CPG_CLKSTATUS, val,
-					 !(val & msk), 100,
-					 CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US);
-		if (ret) {
-			dev_err(priv->dev, "failed to switch clk source\n");
-			return ret;
-		}
+		ret = readl_poll_timeout_atomic(priv->base + CPG_CLKSTATUS, val,
+						!(val & msk), 10,
+						CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US);
+		if (ret)
+			goto unlock;
 	}
 
 	writel(bitmask | ((index + 1) << shift), priv->base + off);
 
-	ret = readl_poll_timeout(priv->base + CPG_CLKSTATUS, val,
-				 !(val & msk), 100,
-				 CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US);
+	ret = readl_poll_timeout_atomic(priv->base + CPG_CLKSTATUS, val,
+					!(val & msk), 10,
+					CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US);
+unlock:
+	spin_unlock_irqrestore(&priv->rmw_lock, flags);
+
 	if (ret)
 		dev_err(priv->dev, "failed to switch clk source\n");
 
diff --git a/drivers/clk/renesas/rzg2l-cpg.h b/drivers/clk/renesas/rzg2l-cpg.h
index 0b28870a6f9d..097fd8f61680 100644
--- a/drivers/clk/renesas/rzg2l-cpg.h
+++ b/drivers/clk/renesas/rzg2l-cpg.h
@@ -43,7 +43,7 @@ 
 #define CPG_CLKSTATUS_SELSDHI0_STS	BIT(28)
 #define CPG_CLKSTATUS_SELSDHI1_STS	BIT(29)
 
-#define CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US	20000
+#define CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US	200
 
 /* n = 0/1/2 for PLL1/4/6 */
 #define CPG_SAMPLL_CLK1(n)	(0x04 + (16 * n))