@@ -452,16 +452,25 @@ static inline void spitz_keys_init(void) {}
* LEDs
******************************************************************************/
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpiod_lookup_table spitz_led_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP("pxa-gpio", SPITZ_GPIO_LED_ORANGE, "led_orange",
+ GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("pxa-gpio", SPITZ_GPIO_LED_GREEN, "led_green",
+ GPIO_ACTIVE_HIGH),
+ { }
+ }
+};
+
static struct gpio_led spitz_gpio_leds[] = {
{
.name = "spitz:amber:charge",
.default_trigger = "sharpsl-charge",
- .gpio = SPITZ_GPIO_LED_ORANGE,
},
{
.name = "spitz:green:hddactivity",
.default_trigger = "disk-activity",
- .gpio = SPITZ_GPIO_LED_GREEN,
},
};
@@ -480,6 +489,11 @@ static struct platform_device spitz_led_device = {
static void __init spitz_leds_init(void)
{
+ gpiod_add_lookup_table(&spitz_led_gpio_table);
+ spitz_gpio_leds[0].gpiod = gpiod_get(&spitz_led_device.dev,
+ "led_orange", GPIOD_ASIS);
+ spitz_gpio_leds[1].gpiod = gpiod_get(&spitz_led_device.dev,
+ "led_green", GPIOD_ASIS);
platform_device_register(&spitz_led_device);
}
#else
Sharp's Spitz board still uses the legacy GPIO interface for configuring its two onboard LEDs. Convert them to use the GPIO descriptor interface. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> --- arch/arm/mach-pxa/spitz.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)