diff mbox series

[v2,2/3] dt-bindings: leds: Mention GPIO triggers

Message ID 20230926-gpio-led-trigger-dt-v2-2-e06e458b788e@linaro.org
State Accepted
Commit f9be4d5bb62ab41723db04d7b3abed2ad6c34825
Headers show
Series [v2,1/3] gpiolib: of: Allow "trigger-sources" to reference a GPIO | expand

Commit Message

Linus Walleij Sept. 26, 2023, 9:48 p.m. UTC
We reuse the trigger-sources phandle to just point to
GPIOs we may want to use as LED triggers.

Example:

gpio: gpio@0 {
    compatible "my-gpio";
    gpio-controller;
    #gpio-cells = <2>;
    interrupt-controller;
    #interrupt-cells = <2>;
    #trigger-source-cells = <2>;
};

leds {
    compatible = "gpio-leds";
    led-my-gpio {
        label = "device:blue:myled";
        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
        default-state = "off";
        linux,default-trigger = "gpio";
        trigger-sources = <&gpio 1 GPIO_ACTIVE_HIGH>;
    };
};

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 Documentation/devicetree/bindings/leds/common.yaml | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 5fb7007f3618..b42950643b9d 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -191,6 +191,8 @@  properties:
       each of them having its own LED assigned (assuming they are not
       hardwired). In such cases this property should contain phandle(s) of
       related source device(s).
+      Another example is a GPIO line that will be monitored and mirror the
+      state of the line (with or without inversion flags) to the LED.
       In many cases LED can be related to more than one device (e.g. one USB LED
       vs. multiple USB ports). Each source should be represented by a node in
       the device tree and be referenced by a phandle and a set of phandle