@@ -2002,8 +2002,7 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
* _opp_add_v1() - Allocate a OPP based on v1 bindings.
* @opp_table: OPP table
* @dev: device for which we do this operation
- * @freq: Frequency in Hz for this OPP
- * @u_volt: Voltage in uVolts for this OPP
+ * @data: The OPP data for the OPP to add
* @dynamic: Dynamically added OPPs.
*
* This function adds an opp definition to the opp table and returns status.
@@ -2021,10 +2020,10 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
* -ENOMEM Memory allocation failure
*/
int _opp_add_v1(struct opp_table *opp_table, struct device *dev,
- unsigned long freq, long u_volt, bool dynamic)
+ struct dev_pm_opp_data *data, bool dynamic)
{
struct dev_pm_opp *new_opp;
- unsigned long tol;
+ unsigned long tol, u_volt = data->u_volt;
int ret;
if (!assert_single_clk(opp_table))
@@ -2035,7 +2034,7 @@ int _opp_add_v1(struct opp_table *opp_table, struct device *dev,
return -ENOMEM;
/* populate the opp table */
- new_opp->rates[0] = freq;
+ new_opp->rates[0] = data->freq;
tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
new_opp->supplies[0].u_volt = u_volt;
new_opp->supplies[0].u_volt_min = u_volt - tol;
@@ -2825,10 +2824,9 @@ int dev_pm_opp_xlate_performance_state(struct opp_table *src_table,
}
/**
- * dev_pm_opp_add() - Add an OPP table from a table definitions
- * @dev: device for which we do this operation
- * @freq: Frequency in Hz for this OPP
- * @u_volt: Voltage in uVolts for this OPP
+ * dev_pm_opp_add_dynamic() - Add an OPP table from a table definitions
+ * @dev: The device for which we do this operation
+ * @data: The OPP data for the OPP to add
*
* This function adds an opp definition to the opp table and returns status.
* The opp is made available by default and it can be controlled using
@@ -2841,7 +2839,7 @@ int dev_pm_opp_xlate_performance_state(struct opp_table *src_table,
* Duplicate OPPs (both freq and volt are same) and !opp->available
* -ENOMEM Memory allocation failure
*/
-int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
+int dev_pm_opp_add_dynamic(struct device *dev, struct dev_pm_opp_data *data)
{
struct opp_table *opp_table;
int ret;
@@ -2853,13 +2851,13 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
/* Fix regulator count for dynamic OPPs */
opp_table->regulator_count = 1;
- ret = _opp_add_v1(opp_table, dev, freq, u_volt, true);
+ ret = _opp_add_v1(opp_table, dev, data, true);
if (ret)
dev_pm_opp_put_opp_table(opp_table);
return ret;
}
-EXPORT_SYMBOL_GPL(dev_pm_opp_add);
+EXPORT_SYMBOL_GPL(dev_pm_opp_add_dynamic);
/**
* _opp_set_availability() - helper to set the availability of an opp
@@ -1077,13 +1077,15 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table)
val = prop->value;
while (nr) {
- unsigned long freq = be32_to_cpup(val++) * 1000;
- unsigned long volt = be32_to_cpup(val++);
+ struct dev_pm_opp_data data = {
+ .freq = be32_to_cpup(val++) * 1000,
+ .u_volt = be32_to_cpup(val++),
+ };
- ret = _opp_add_v1(opp_table, dev, freq, volt, false);
+ ret = _opp_add_v1(opp_table, dev, &data, false);
if (ret) {
dev_err(dev, "%s: Failed to add OPP %ld (%d)\n",
- __func__, freq, ret);
+ __func__, data.freq, ret);
goto remove_static_opp;
}
nr -= 2;
@@ -251,7 +251,7 @@ struct dev_pm_opp *_opp_allocate(struct opp_table *opp_table);
void _opp_free(struct dev_pm_opp *opp);
int _opp_compare_key(struct opp_table *opp_table, struct dev_pm_opp *opp1, struct dev_pm_opp *opp2);
int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table);
-int _opp_add_v1(struct opp_table *opp_table, struct device *dev, unsigned long freq, long u_volt, bool dynamic);
+int _opp_add_v1(struct opp_table *opp_table, struct device *dev, struct dev_pm_opp_data *data, bool dynamic);
void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, int last_cpu);
struct opp_table *_add_opp_table_indexed(struct device *dev, int index, bool getclk);
void _put_opp_list_kref(struct opp_table *opp_table);
@@ -92,6 +92,16 @@ struct dev_pm_opp_config {
struct device ***virt_devs;
};
+/**
+ * struct dev_pm_opp_data - The data to use to initialize an OPP.
+ * @freq: The clock rate in Hz for the OPP.
+ * @u_volt: The voltage in uV for the OPP.
+ */
+struct dev_pm_opp_data {
+ unsigned long freq;
+ unsigned long u_volt;
+};
+
#if defined(CONFIG_PM_OPP)
struct opp_table *dev_pm_opp_get_opp_table(struct device *dev);
@@ -152,8 +162,8 @@ struct dev_pm_opp *dev_pm_opp_find_bw_floor(struct device *dev,
void dev_pm_opp_put(struct dev_pm_opp *opp);
-int dev_pm_opp_add(struct device *dev, unsigned long freq,
- unsigned long u_volt);
+int dev_pm_opp_add_dynamic(struct device *dev, struct dev_pm_opp_data *opp);
+
void dev_pm_opp_remove(struct device *dev, unsigned long freq);
void dev_pm_opp_remove_all_dynamic(struct device *dev);
@@ -322,8 +332,8 @@ static inline struct dev_pm_opp *dev_pm_opp_find_bw_floor(struct device *dev,
static inline void dev_pm_opp_put(struct dev_pm_opp *opp) {}
-static inline int dev_pm_opp_add(struct device *dev, unsigned long freq,
- unsigned long u_volt)
+static inline int
+dev_pm_opp_add_dynamic(struct device *dev, struct dev_pm_opp_data *opp)
{
return -EOPNOTSUPP;
}
@@ -519,6 +529,17 @@ static inline int dev_pm_opp_of_find_icc_paths(struct device *dev, struct opp_ta
/* OPP Configuration helpers */
+static inline int dev_pm_opp_add(struct device *dev, unsigned long freq,
+ unsigned long u_volt)
+{
+ struct dev_pm_opp_data data = {
+ .freq = freq,
+ .u_volt = u_volt,
+ };
+
+ return dev_pm_opp_add_dynamic(dev, &data);
+}
+
/* Regulators helpers */
static inline int dev_pm_opp_set_regulators(struct device *dev,
const char * const names[])
The dev_pm_opp_add() API is limited to add dynamic OPPs with a frequency and a voltage level. To enable more flexibility, let's add a new API, dev_pm_opp_add_dynamic() that's takes a struct dev_pm_opp_data* instead of a list of in-parameters. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- drivers/opp/core.c | 22 ++++++++++------------ drivers/opp/of.c | 10 ++++++---- drivers/opp/opp.h | 2 +- include/linux/pm_opp.h | 29 +++++++++++++++++++++++++---- 4 files changed, 42 insertions(+), 21 deletions(-)