diff mbox series

[v2,09/11] arm64: dts: qcom: ipq6018: include the GPLL0 as clock provider for mailbox

Message ID 20230913-gpll_cleanup-v2-9-c8ceb1a37680@quicinc.com
State Accepted
Commit 0133c7af3aa0420778d106cb90db708cfa45f2c6
Headers show
Series Add GPLL0 as clock provider for the Qualcomm's IPQ mailbox controller | expand

Commit Message

Kathiravan Thirumoorthy Sept. 14, 2023, 6:59 a.m. UTC
While the kernel is booting up, APSS PLL will be running at 800MHz with
GPLL0 as source. Once the cpufreq driver is available, APSS PLL will be
configured to the rate based on the opp table and the source also will
be changed to APSS_PLL_EARLY. So allow the mailbox to consume the GPLL0,
with this inclusion, CPU Freq correctly reports that CPU is running at
800MHz rather than 24MHz.

Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
---
Changes in V2:
	- Splitted the change into target specific file
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Konrad Dybcio Sept. 27, 2023, 11:33 a.m. UTC | #1
On 14.09.2023 08:59, Kathiravan Thirumoorthy wrote:
> While the kernel is booting up, APSS PLL will be running at 800MHz with
> GPLL0 as source. Once the cpufreq driver is available, APSS PLL will be
> configured to the rate based on the opp table and the source also will
> be changed to APSS_PLL_EARLY. So allow the mailbox to consume the GPLL0,
> with this inclusion, CPU Freq correctly reports that CPU is running at
> 800MHz rather than 24MHz.
> 
> Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 47b8b1d6730a..a30a5b893762 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -619,8 +619,8 @@  apcs_glb: mailbox@b111000 {
 			compatible = "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0 0x0b111000 0x0 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};