@@ -1205,6 +1205,10 @@ static int sc16is7xx_probe(struct device *dev,
}
#endif
+ /* reset device, purging any pending irq / data */
+ regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT,
+ SC16IS7XX_IOCONTROL_SRESET_BIT);
+
for (i = 0; i < devtype->nr_uart; ++i) {
s->p[i].line = i;
/* Initialize port data */
@@ -1234,6 +1238,22 @@ static int sc16is7xx_probe(struct device *dev,
init_kthread_work(&s->p[i].reg_work, sc16is7xx_reg_proc);
/* Register port */
uart_add_one_port(&sc16is7xx_uart, &s->p[i].port);
+
+ /* Enable EFR */
+ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG,
+ SC16IS7XX_LCR_CONF_MODE_B);
+
+ regcache_cache_bypass(s->regmap, true);
+
+ /* Enable write access to enhanced features */
+ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFR_REG,
+ SC16IS7XX_EFR_ENABLE_BIT);
+
+ regcache_cache_bypass(s->regmap, false);
+
+ /* Restore access to general registers */
+ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG, 0x00);
+
/* Go to suspend mode */
sc16is7xx_power(&s->p[i].port, 0);
}
Previously sc16is7xx_power was called in order to set the device to a low power mode. However since SC16IS7XX_EFR_ENABLE_BIT was not set beforehand this suspend request had not effect. Also, soft-reset the device prior to port initialization. It may otherwise be in a state (interrupt pending, fifo not empty) which prevents it from sleeping. Signed-off-by: Florian Vallee <fvallee@eukrea.fr> --- drivers/tty/serial/sc16is7xx.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html