diff mbox series

[tty,v1,14/74] serial: altera_jtaguart: Use port lock wrappers

Message ID 20230914183831.587273-15-john.ogness@linutronix.de
State New
Headers show
Series serial: wrappers for uart port lock | expand

Commit Message

John Ogness Sept. 14, 2023, 6:37 p.m. UTC 
From: Thomas Gleixner <tglx@linutronix.de>

When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.

So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.

All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.

To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.

Converted with coccinelle. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/tty/serial/altera_jtaguart.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 5fab4c978891..7090b251dd4d 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -147,14 +147,14 @@  static irqreturn_t altera_jtaguart_interrupt(int irq, void *data)
 	isr = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) >>
 	       ALTERA_JTAGUART_CONTROL_RI_OFF) & port->read_status_mask;
 
-	spin_lock(&port->lock);
+	uart_port_lock(port);
 
 	if (isr & ALTERA_JTAGUART_CONTROL_RE_MSK)
 		altera_jtaguart_rx_chars(port);
 	if (isr & ALTERA_JTAGUART_CONTROL_WE_MSK)
 		altera_jtaguart_tx_chars(port);
 
-	spin_unlock(&port->lock);
+	uart_port_unlock(port);
 
 	return IRQ_RETVAL(isr);
 }
@@ -180,14 +180,14 @@  static int altera_jtaguart_startup(struct uart_port *port)
 		return ret;
 	}
 
-	spin_lock_irqsave(&port->lock, flags);
+	uart_port_lock_irqsave(port, &flags);
 
 	/* Enable RX interrupts now */
 	port->read_status_mask = ALTERA_JTAGUART_CONTROL_RE_MSK;
 	writel(port->read_status_mask,
 			port->membase + ALTERA_JTAGUART_CONTROL_REG);
 
-	spin_unlock_irqrestore(&port->lock, flags);
+	uart_port_unlock_irqrestore(port, flags);
 
 	return 0;
 }
@@ -196,14 +196,14 @@  static void altera_jtaguart_shutdown(struct uart_port *port)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&port->lock, flags);
+	uart_port_lock_irqsave(port, &flags);
 
 	/* Disable all interrupts now */
 	port->read_status_mask = 0;
 	writel(port->read_status_mask,
 			port->membase + ALTERA_JTAGUART_CONTROL_REG);
 
-	spin_unlock_irqrestore(&port->lock, flags);
+	uart_port_unlock_irqrestore(port, flags);
 
 	free_irq(port->irq, port);
 }
@@ -264,33 +264,33 @@  static void altera_jtaguart_console_putc(struct uart_port *port, unsigned char c
 	unsigned long flags;
 	u32 status;
 
-	spin_lock_irqsave(&port->lock, flags);
+	uart_port_lock_irqsave(port, &flags);
 	while (!altera_jtaguart_tx_space(port, &status)) {
-		spin_unlock_irqrestore(&port->lock, flags);
+		uart_port_unlock_irqrestore(port, flags);
 
 		if ((status & ALTERA_JTAGUART_CONTROL_AC_MSK) == 0) {
 			return;	/* no connection activity */
 		}
 
 		cpu_relax();
-		spin_lock_irqsave(&port->lock, flags);
+		uart_port_lock_irqsave(port, &flags);
 	}
 	writel(c, port->membase + ALTERA_JTAGUART_DATA_REG);
-	spin_unlock_irqrestore(&port->lock, flags);
+	uart_port_unlock_irqrestore(port, flags);
 }
 #else
 static void altera_jtaguart_console_putc(struct uart_port *port, unsigned char c)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&port->lock, flags);
+	uart_port_lock_irqsave(port, &flags);
 	while (!altera_jtaguart_tx_space(port, NULL)) {
-		spin_unlock_irqrestore(&port->lock, flags);
+		uart_port_unlock_irqrestore(port, flags);
 		cpu_relax();
-		spin_lock_irqsave(&port->lock, flags);
+		uart_port_lock_irqsave(port, &flags);
 	}
 	writel(c, port->membase + ALTERA_JTAGUART_DATA_REG);
-	spin_unlock_irqrestore(&port->lock, flags);
+	uart_port_unlock_irqrestore(port, flags);
 }
 #endif