diff mbox series

[v2,08/11] arm64: dts: qcom: ipq8074: include the GPLL0 as clock provider for mailbox

Message ID 20230913-gpll_cleanup-v2-8-c8ceb1a37680@quicinc.com
State Accepted
Commit 80ebe63329909531afc87335f1d95c7bf8414438
Headers show
Series [v2,01/11] clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks | expand

Commit Message

Kathiravan Thirumoorthy Sept. 14, 2023, 6:59 a.m. UTC
While the kernel is booting up, APSS PLL will be running at 800MHz with
GPLL0 as source. Once the cpufreq driver is available, APSS PLL will be
configured to the rate based on the opp table and the source also will
be changed to APSS_PLL_EARLY. So allow the mailbox to consume the GPLL0,
with this inclusion, CPU Freq correctly reports that CPU is running at
800MHz rather than 24MHz.

Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
---
Changes in V2:
	- Splitted the change into target specific file
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 00ed71936b47..0be19267bdcf 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -719,8 +719,8 @@  apcs_glb: mailbox@b111000 {
 			compatible = "qcom,ipq8074-apcs-apps-global",
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;