| Message ID | 20230911120203.774632-11-gatien.chevallier@foss.st.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | hwrng: stm32: support STM32MP13x platforms | expand |
On 11/09/2023 14:02, Gatien Chevallier wrote: > The RNG on STM32MP13 offers upgrades like customization of its > configuration and the conditional reset. > > The hardware RNG should be managed in the secure world for but it > is supported on Linux. Therefore, is it not default enabled. > > Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com> > --- > arch/arm/boot/dts/st/stm32mp131.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi > index ac90fcbf0c09..39db82b782eb 100644 > --- a/arch/arm/boot/dts/st/stm32mp131.dtsi > +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi > @@ -1220,6 +1220,14 @@ mdma: dma-controller@58000000 { > dma-requests = <48>; > }; > > + rng: rng@54004000 { > + compatible = "st,stm32mp13-rng"; > + reg = <0x54004000 0x400>; > + clocks = <&rcc RNG1_K>; > + resets = <&rcc RNG1_R>; > + status = "disabled"; Why? What other resources are missing? Best regards, Krzysztof
On 9/12/23 16:38, Krzysztof Kozlowski wrote: > On 11/09/2023 14:02, Gatien Chevallier wrote: >> The RNG on STM32MP13 offers upgrades like customization of its >> configuration and the conditional reset. >> >> The hardware RNG should be managed in the secure world for but it >> is supported on Linux. Therefore, is it not default enabled. >> >> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com> >> --- >> arch/arm/boot/dts/st/stm32mp131.dtsi | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi >> index ac90fcbf0c09..39db82b782eb 100644 >> --- a/arch/arm/boot/dts/st/stm32mp131.dtsi >> +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi >> @@ -1220,6 +1220,14 @@ mdma: dma-controller@58000000 { >> dma-requests = <48>; >> }; >> >> + rng: rng@54004000 { >> + compatible = "st,stm32mp13-rng"; >> + reg = <0x54004000 0x400>; >> + clocks = <&rcc RNG1_K>; >> + resets = <&rcc RNG1_R>; >> + status = "disabled"; > > Why? What other resources are missing? > > Best regards, > Krzysztof > Hello Krzysztof, Our default implementation is to handle the RNG in OP-TEE for these platforms. Therefore, it goes through optee-rng driver. The RNG services are exposed by a PTA (Pseudo Trusted Application) in OP-TEE. In this case, there's no need to enable the RNG node in the Linux Kernel. Best regards, Gatien
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi index ac90fcbf0c09..39db82b782eb 100644 --- a/arch/arm/boot/dts/st/stm32mp131.dtsi +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi @@ -1220,6 +1220,14 @@ mdma: dma-controller@58000000 { dma-requests = <48>; }; + rng: rng@54004000 { + compatible = "st,stm32mp13-rng"; + reg = <0x54004000 0x400>; + clocks = <&rcc RNG1_K>; + resets = <&rcc RNG1_R>; + status = "disabled"; + }; + fmc: memory-controller@58002000 { compatible = "st,stm32mp1-fmc2-ebi"; reg = <0x58002000 0x1000>;
The RNG on STM32MP13 offers upgrades like customization of its configuration and the conditional reset. The hardware RNG should be managed in the secure world for but it is supported on Linux. Therefore, is it not default enabled. Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com> --- arch/arm/boot/dts/st/stm32mp131.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)