| Message ID | 20230829-for-ml-tqmls10xxa-v2-test-v2-3-b1da63785b25@ew.tq-group.com |
|---|---|
| State | Accepted |
| Commit | 981e850f46e2fb9658e692da65143fc088ac3445 |
| Headers | show |
| Series | [v2,1/6] arm64: dts: ls1043a: remove second dspi node | expand |
On Tue, Aug 29, 2023 at 11:26:59AM +0200, Gregor Herburger wrote: > This adds support for the TQMLS1043A and TQMLS1046A SOM and the > MBLS10xxA baseboard. TQMLS1043A and TQMLS1046A share a common layout > and can be used on the MBLS10xxA. > > Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> > --- > arch/arm64/boot/dts/freescale/Makefile | 2 + > .../freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts | 49 ++++++++ > .../boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi | 32 +++++ > .../freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts | 56 +++++++++ > .../boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi | 42 +++++++ > .../dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi | 104 ++++++++++++++++ > .../boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi | 136 +++++++++++++++++++++ > arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi | 58 +++++++++ > 8 files changed, 479 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index c6872b7e9471..8bb67d1e8f4d 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -15,9 +15,11 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-tqmls1043a-mbls10xxa.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts > new file mode 100644 > index 000000000000..599101d06f74 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts > @@ -0,0 +1,49 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +/* > + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, > + * D-82229 Seefeld, Germany. > + * Author: Gregor Herburger, Timo Herbrecher > + * > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > + > +#include "fsl-ls1043a-tqmls1043a.dtsi" > +#include "tqmls10xxa-mbls10xxa.dtsi" > + > +/ { > + model = "TQ-Systems GmbH LS1043A TQMLS1043A SoM on MBLS10xxA board"; > + compatible = "tq,ls1043a-tqmls1043a-mbls10xxa", "tq,ls1043a-tqmls1043a", > + "fsl,ls1043a"; > + > + aliases { > + serial0 = &duart0; > + serial1 = &duart1; > + qsgmii-s1-p1 = &qsgmii1_phy1; Sort the list alphabetically. Shawn > + qsgmii-s1-p2 = &qsgmii1_phy2; > + qsgmii-s1-p3 = &qsgmii1_phy3; > + qsgmii-s1-p4 = &qsgmii1_phy4; > + qsgmii-s2-p1 = &qsgmii2_phy1; > + qsgmii-s2-p2 = &qsgmii2_phy2; > + qsgmii-s2-p3 = &qsgmii2_phy3; > + qsgmii-s2-p4 = &qsgmii2_phy4; > + }; > + > + chosen { > + stdout-path = &duart1; > + }; > +}; > + > +&esdhc { > + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; > + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; > +}; > + > +&usb2 { > + status = "okay"; > +}; > + > +#include "fsl-ls1043-post.dtsi" > +#include "tqmls104xa-mbls10xxa-fman.dtsi" > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi > new file mode 100644 > index 000000000000..12d5f3938e5d > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi > @@ -0,0 +1,32 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +/* > + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, > + * D-82229 Seefeld, Germany. > + * Author: Gregor Herburger, Timo Herbrecher > + * > + * Device Tree Include file for LS1043A based SoM of TQ > + */ > + > +#include "fsl-ls1043a.dtsi" > +#include "tqmls10xxa.dtsi" > + > +&qspi { > + num-cs = <2>; > + status = "okay"; > + > + qflash0: flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <62500000>; > + spi-rx-bus-width = <4>; > + spi-tx-bus-width = <4>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + }; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts > new file mode 100644 > index 000000000000..12e1460bd3da > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts > @@ -0,0 +1,56 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +/* > + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, > + * D-82229 Seefeld, Germany. > + * Author: Gregor Herburger, Timo Herbrecher > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > + > +#include "fsl-ls1046a-tqmls1046a.dtsi" > +#include "tqmls10xxa-mbls10xxa.dtsi" > + > +/ { > + model = "TQ-Systems GmbH LS1046A TQMLS1046A SoM on MBLS10xxA board"; > + compatible = "tq,ls1046a-tqmls1046a-mbls10xxa", "tq,ls1046a-tqmls1046a", > + "fsl,ls1046a"; > + > + aliases { > + serial0 = &duart0; > + serial1 = &duart1; > + qsgmii-s1-p1 = &qsgmii1_phy1; > + qsgmii-s1-p2 = &qsgmii1_phy2; > + qsgmii-s1-p3 = &qsgmii1_phy3; > + qsgmii-s1-p4 = &qsgmii1_phy4; > + qsgmii-s2-p1 = &qsgmii2_phy1; > + qsgmii-s2-p2 = &qsgmii2_phy2; > + qsgmii-s2-p3 = &qsgmii2_phy3; > + qsgmii-s2-p4 = &qsgmii2_phy4; > + }; > + > + chosen { > + stdout-path = &duart1; > + }; > +}; > + > +&dspi { > + status = "okay"; > +}; > + > +&esdhc { > + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; > + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; > +}; > + > +&usb2 { > + status = "okay"; > +}; > + > +#include "fsl-ls1046-post.dtsi" > +#include "tqmls104xa-mbls10xxa-fman.dtsi" > + > +&enet7 { > + status = "disabled"; > +}; > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi > new file mode 100644 > index 000000000000..4a8f8bc688f5 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi > @@ -0,0 +1,42 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +/* > + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, > + * D-82229 Seefeld, Germany. > + * Author: Gregor Herburger, Timo Herbrecher > + * > + * Device Tree Include file for LS1046A based SoM of TQ > + */ > + > +#include "fsl-ls1046a.dtsi" > +#include "tqmls10xxa.dtsi" > + > +&qspi { > + num-cs = <2>; > + status = "okay"; > + > + qflash0: flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <62500000>; > + spi-rx-bus-width = <4>; > + spi-tx-bus-width = <4>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + }; > + }; > + > + qflash1: flash@1 { > + compatible = "jedec,spi-nor"; > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <62500000>; > + spi-rx-bus-width = <4>; > + spi-tx-bus-width = <4>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi > new file mode 100644 > index 000000000000..4c38dd541143 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi > @@ -0,0 +1,104 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +/* > + * Copyright (c) 2019,2023 TQ-Systems GmbH <linux@ew.tq-group.com>, > + * D-82229 Seefeld, Germany. > + * Author: Gregor Herburger, Timo Herbrecher > + * > + * Device Tree Include file for MBLS10xxA from TQ (FMAN related sections) > + */ > + > +#include <dt-bindings/net/ti-dp83867.h> > + > +&enet0 { > + status = "disabled"; > +}; > + > +&enet1 { > + status = "disabled"; > +}; > + > +&enet2 { > + phy-handle = <&rgmii_phy1>; > + phy-connection-type = "rgmii"; > + phy-mode = "rgmii-id"; > + status = "okay"; > +}; > + > +&enet3 { > + phy-handle = <&rgmii_phy2>; > + phy-connection-type = "rgmii"; > + phy-mode = "rgmii-id"; > + status = "okay"; > +}; > + > +&enet4 { > + status = "disabled"; > +}; > + > +&enet5 { > + status = "disabled"; > +}; > + > +&enet6 { > + status = "disabled"; > +}; > + > +&mdio0 { > + status = "okay"; > + > + qsgmii2_phy1: ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x00>; > + }; > + > + qsgmii2_phy2: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x01>; > + }; > + > + qsgmii2_phy3: ethernet-phy@2 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x02>; > + }; > + > + qsgmii2_phy4: ethernet-phy@3 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x03>; > + }; > + > + rgmii_phy2: ethernet-phy@c { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x0c>; > + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; > + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; > + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; > + }; > + > + rgmii_phy1: ethernet-phy@e { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x0e>; > + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; > + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; > + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; > + }; > + > + qsgmii1_phy1: ethernet-phy@1c { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x1c>; > + }; > + > + qsgmii1_phy2: ethernet-phy@1d { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x1d>; > + }; > + > + qsgmii1_phy3: ethernet-phy@1e { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x1e>; > + }; > + > + qsgmii1_phy4: ethernet-phy@1f { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x1f>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi > new file mode 100644 > index 000000000000..65b4ed28a3d4 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi > @@ -0,0 +1,136 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +/* > + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, > + * D-82229 Seefeld, Germany. > + * Author: Gregor Herburger, Timo Herbrecher > + * > + * Device Tree Include file for MBLS10xxA from TQ > + */ > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > + > +/ { > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + poll-interval = <100>; > + autorepeat; > + > + button-0 { > + label = "button0"; > + gpios = <&gpioexp3 5 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_F1>; > + }; > + > + button-1 { > + label = "button1"; > + gpios = <&gpioexp3 6 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_F2>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + led-user { > + gpios = <&gpioexp3 13 GPIO_ACTIVE_LOW>; > + color = <LED_COLOR_ID_GREEN>; > + function = LED_FUNCTION_HEARTBEAT; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > + reg_3v3: regulator-3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "V_3V3_MB"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > +}; > + > +&duart0 { > + status = "okay"; > +}; > + > +&duart1 { > + status = "okay"; > +}; > + > +&esdhc { > + status = "okay"; > +}; > + > +&i2c3 { > + status = "okay"; > + > + i2c-mux@70 { > + compatible = "nxp,pca9544"; > + reg = <0x70>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + i2c@0 { > + reg = <0x0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpioexp1: gpio@20 { > + compatible = "nxp,pca9555"; > + reg = <0x20>; > + vcc-supply = <®_3v3>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + gpioexp2: gpio@21 { > + compatible = "nxp,pca9555"; > + reg = <0x21>; > + vcc-supply = <®_3v3>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + gpioexp3: gpio@22 { > + compatible = "nxp,pca9555"; > + reg = <0x22>; > + vcc-supply = <®_3v3>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + }; > + > + sfp1_i2c: i2c@1 { > + reg = <0x1>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + sfp2_i2c: i2c@2 { > + reg = <0x2>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c@3 { > + reg = <0x3>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > +}; > + > +&sata { > + status = "okay"; > +}; > + > +&usb0 { > + status = "okay"; > +}; > + > +&usb1 { > + dr_mode = "otg"; > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi > new file mode 100644 > index 000000000000..138f8778afde > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi > @@ -0,0 +1,58 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +/* > + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, > + * D-82229 Seefeld, Germany. > + * Author: Gregor Herburger, Timo Herbrecher > + * > + * Device Tree Include file for TQMLs10xxA SoM of TQ > + */ > + > +/ { > + reg_vcc3v3: regulator-vcc3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > +}; > + > +&i2c0 { > + status = "okay"; > + > + temperature-sensor@18 { > + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; > + reg = <0x18>; > + }; > + > + eeprom@50 { > + compatible = "nxp,se97b", "atmel,24c02"; > + reg = <0x50>; > + pagesize = <16>; > + vcc-supply = <®_vcc3v3>; > + read-only; > + }; > + > + rtc@51 { > + compatible = "nxp,pcf85063a"; > + reg = <0x51>; > + }; > + > + eeprom@57 { > + compatible = "atmel,24c64"; > + reg = <0x57>; > + pagesize = <32>; > + vcc-supply = <®_vcc3v3>; > + }; > +}; > + > +&esdhc { > + /* eSDHC or eMMC: set by bootloader */ > + non-removable; > + disable-wp; > + mmc-hs200-1_8v; > + sd-uhs-sdr104; > + sd-uhs-sdr50; > + sd-uhs-sdr25; > + sd-uhs-sdr12; > +}; > > -- > 2.34.1 >
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index c6872b7e9471..8bb67d1e8f4d 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -15,9 +15,11 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-tqmls1043a-mbls10xxa.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts new file mode 100644 index 000000000000..599101d06f74 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "fsl-ls1043a-tqmls1043a.dtsi" +#include "tqmls10xxa-mbls10xxa.dtsi" + +/ { + model = "TQ-Systems GmbH LS1043A TQMLS1043A SoM on MBLS10xxA board"; + compatible = "tq,ls1043a-tqmls1043a-mbls10xxa", "tq,ls1043a-tqmls1043a", + "fsl,ls1043a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + qsgmii-s1-p1 = &qsgmii1_phy1; + qsgmii-s1-p2 = &qsgmii1_phy2; + qsgmii-s1-p3 = &qsgmii1_phy3; + qsgmii-s1-p4 = &qsgmii1_phy4; + qsgmii-s2-p1 = &qsgmii2_phy1; + qsgmii-s2-p2 = &qsgmii2_phy2; + qsgmii-s2-p3 = &qsgmii2_phy3; + qsgmii-s2-p4 = &qsgmii2_phy4; + }; + + chosen { + stdout-path = &duart1; + }; +}; + +&esdhc { + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; +}; + +&usb2 { + status = "okay"; +}; + +#include "fsl-ls1043-post.dtsi" +#include "tqmls104xa-mbls10xxa-fman.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi new file mode 100644 index 000000000000..12d5f3938e5d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for LS1043A based SoM of TQ + */ + +#include "fsl-ls1043a.dtsi" +#include "tqmls10xxa.dtsi" + +&qspi { + num-cs = <2>; + status = "okay"; + + qflash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <62500000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts new file mode 100644 index 000000000000..12e1460bd3da --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "fsl-ls1046a-tqmls1046a.dtsi" +#include "tqmls10xxa-mbls10xxa.dtsi" + +/ { + model = "TQ-Systems GmbH LS1046A TQMLS1046A SoM on MBLS10xxA board"; + compatible = "tq,ls1046a-tqmls1046a-mbls10xxa", "tq,ls1046a-tqmls1046a", + "fsl,ls1046a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + qsgmii-s1-p1 = &qsgmii1_phy1; + qsgmii-s1-p2 = &qsgmii1_phy2; + qsgmii-s1-p3 = &qsgmii1_phy3; + qsgmii-s1-p4 = &qsgmii1_phy4; + qsgmii-s2-p1 = &qsgmii2_phy1; + qsgmii-s2-p2 = &qsgmii2_phy2; + qsgmii-s2-p3 = &qsgmii2_phy3; + qsgmii-s2-p4 = &qsgmii2_phy4; + }; + + chosen { + stdout-path = &duart1; + }; +}; + +&dspi { + status = "okay"; +}; + +&esdhc { + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; +}; + +&usb2 { + status = "okay"; +}; + +#include "fsl-ls1046-post.dtsi" +#include "tqmls104xa-mbls10xxa-fman.dtsi" + +&enet7 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi new file mode 100644 index 000000000000..4a8f8bc688f5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for LS1046A based SoM of TQ + */ + +#include "fsl-ls1046a.dtsi" +#include "tqmls10xxa.dtsi" + +&qspi { + num-cs = <2>; + status = "okay"; + + qflash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <62500000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + qflash1: flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <62500000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi new file mode 100644 index 000000000000..4c38dd541143 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2019,2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for MBLS10xxA from TQ (FMAN related sections) + */ + +#include <dt-bindings/net/ti-dp83867.h> + +&enet0 { + status = "disabled"; +}; + +&enet1 { + status = "disabled"; +}; + +&enet2 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&enet3 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&enet4 { + status = "disabled"; +}; + +&enet5 { + status = "disabled"; +}; + +&enet6 { + status = "disabled"; +}; + +&mdio0 { + status = "okay"; + + qsgmii2_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x00>; + }; + + qsgmii2_phy2: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x01>; + }; + + qsgmii2_phy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x02>; + }; + + qsgmii2_phy4: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x03>; + }; + + rgmii_phy2: ethernet-phy@c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0c>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + }; + + rgmii_phy1: ethernet-phy@e { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0e>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + }; + + qsgmii1_phy1: ethernet-phy@1c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1c>; + }; + + qsgmii1_phy2: ethernet-phy@1d { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1d>; + }; + + qsgmii1_phy3: ethernet-phy@1e { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1e>; + }; + + qsgmii1_phy4: ethernet-phy@1f { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1f>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi new file mode 100644 index 000000000000..65b4ed28a3d4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for MBLS10xxA from TQ + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + autorepeat; + + button-0 { + label = "button0"; + gpios = <&gpioexp3 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F1>; + }; + + button-1 { + label = "button1"; + gpios = <&gpioexp3 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F2>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-user { + gpios = <&gpioexp3 13 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&esdhc { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9544"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + gpioexp1: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + vcc-supply = <®_3v3>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpioexp2: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + vcc-supply = <®_3v3>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpioexp3: gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + vcc-supply = <®_3v3>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + sfp1_i2c: i2c@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sfp2_i2c: i2c@2 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c@3 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi new file mode 100644 index 000000000000..138f8778afde --- /dev/null +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for TQMLs10xxA SoM of TQ + */ + +/ { + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&i2c0 { + status = "okay"; + + temperature-sensor@18 { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x18>; + }; + + eeprom@50 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + vcc-supply = <®_vcc3v3>; + read-only; + }; + + rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + vcc-supply = <®_vcc3v3>; + }; +}; + +&esdhc { + /* eSDHC or eMMC: set by bootloader */ + non-removable; + disable-wp; + mmc-hs200-1_8v; + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; +};
This adds support for the TQMLS1043A and TQMLS1046A SOM and the MBLS10xxA baseboard. TQMLS1043A and TQMLS1046A share a common layout and can be used on the MBLS10xxA. Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> --- arch/arm64/boot/dts/freescale/Makefile | 2 + .../freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts | 49 ++++++++ .../boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi | 32 +++++ .../freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts | 56 +++++++++ .../boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi | 42 +++++++ .../dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi | 104 ++++++++++++++++ .../boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi | 136 +++++++++++++++++++++ arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi | 58 +++++++++ 8 files changed, 479 insertions(+)