diff mbox series

[v4,15/38] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files

Message ID 20230827005920.898719-16-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series ARM: dts: qcom: cleanup PMIC usage | expand

Commit Message

Dmitry Baryshkov Aug. 27, 2023, 12:58 a.m. UTC 
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is
not a property of the SoC, it is a property of the particular board
(even if it is standard and unified between all devices). Move these
interrupt specifications to the board files.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi | 4 ++++
 arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi        | 1 -
 2 files changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index dac3aa793f71..b782ff0d16cd 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -76,6 +76,10 @@  reset-out-pins {
 	};
 };
 
+&pm8018 {
+	interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pm8018_gpio {
 	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index c4cfbdbcdf14..373d9425b8bd 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -265,7 +265,6 @@  qcom,ssbi@500000 {
 
 			pm8018: pmic {
 				compatible = "qcom,pm8018", "qcom,pm8921";
-				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				#address-cells = <1>;