| Message ID | 1467965467-28180-2-git-send-email-jorge.ramirez-ortiz@linaro.org |
|---|---|
| State | Accepted |
| Commit | 1b9c7b2d6339cb1353292a25c052f2b86efbb1b8 |
| Headers | show |
Hi Jorge, On 08/07/2016 09:11, Jorge Ramirez-Ortiz wrote: > Enable support for higher baud rates (up to 3Mbps) in UART1 - required > for bluetooth transfers. > > Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> > Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Fine to me. Thanks! Acked-by: Wei Xu <xuwei5@hisilicon.com> Best Regards, Wei > --- > arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts > index e92a30c..27be812 100644 > --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts > +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts > @@ -55,6 +55,8 @@ > }; > > uart1: uart@f7111000 { > + assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; > + assigned-clock-rates = <150000000>; > status = "ok"; > }; > >
On 07/11/2016 11:53 AM, Wei Xu wrote: > Hi Jorge, > > On 08/07/2016 09:11, Jorge Ramirez-Ortiz wrote: >> Enable support for higher baud rates (up to 3Mbps) in UART1 - required >> for bluetooth transfers. >> >> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> >> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> > Fine to me. > Thanks! > > Acked-by: Wei Xu <xuwei5@hisilicon.com> > > Best Regards, > Wei > >> --- >> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts >> index e92a30c..27be812 100644 >> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts >> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts >> @@ -55,6 +55,8 @@ >> }; >> >> uart1: uart@f7111000 { >> + assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; >> + assigned-clock-rates = <150000000>; >> status = "ok"; >> }; >> >> Wei Xu, I couldn't find the change upstream. has it been merged?
On 19/08/2016 07:57, Jorge Ramirez wrote: > On 07/11/2016 11:53 AM, Wei Xu wrote: >> Hi Jorge, >> >> On 08/07/2016 09:11, Jorge Ramirez-Ortiz wrote: >>> Enable support for higher baud rates (up to 3Mbps) in UART1 - required >>> for bluetooth transfers. >>> >>> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> >>> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> >> Fine to me. >> Thanks! >> >> Acked-by: Wei Xu <xuwei5@hisilicon.com> >> >> Best Regards, >> Wei >> >>> --- >>> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++ >>> 1 file changed, 2 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts >>> index e92a30c..27be812 100644 >>> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts >>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts >>> @@ -55,6 +55,8 @@ >>> }; >>> uart1: uart@f7111000 { >>> + assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; >>> + assigned-clock-rates = <150000000>; >>> status = "ok"; >>> }; >>> Hi Jorge, > Wei Xu, > > I couldn't find the change upstream. has it been merged? No. I thought Mike will pick them. If nothing need to be change, I will pick up it. Best Regards, Wei > > > . >
On 08/19/2016 10:29 AM, Wei Xu wrote: > > On 19/08/2016 07:57, Jorge Ramirez wrote: >> On 07/11/2016 11:53 AM, Wei Xu wrote: >>> Hi Jorge, >>> >>> On 08/07/2016 09:11, Jorge Ramirez-Ortiz wrote: >>>> Enable support for higher baud rates (up to 3Mbps) in UART1 - required >>>> for bluetooth transfers. >>>> >>>> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> >>>> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> >>> Fine to me. >>> Thanks! >>> >>> Acked-by: Wei Xu <xuwei5@hisilicon.com> >>> >>> Best Regards, >>> Wei >>> >>>> --- >>>> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++ >>>> 1 file changed, 2 insertions(+) >>>> >>>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts >>>> index e92a30c..27be812 100644 >>>> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts >>>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts >>>> @@ -55,6 +55,8 @@ >>>> }; >>>> uart1: uart@f7111000 { >>>> + assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; >>>> + assigned-clock-rates = <150000000>; >>>> status = "ok"; >>>> }; >>>> > Hi Jorge, > >> Wei Xu, >> >> I couldn't find the change upstream. has it been merged? > No. > I thought Mike will pick them. > If nothing need to be change, I will pick up it. yes please, AFAIK nothing needs to be changed.
Hi Jorge, On 08/07/2016 09:11, Jorge Ramirez-Ortiz wrote: > Enable support for higher baud rates (up to 3Mbps) in UART1 - required > for bluetooth transfers. > > Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> > Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> > --- Applied to the hisi-dt-4.9 branch. Thanks! Best Regards, Wei > arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts > index e92a30c..27be812 100644 > --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts > +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts > @@ -55,6 +55,8 @@ > }; > > uart1: uart@f7111000 { > + assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; > + assigned-clock-rates = <150000000>; > status = "ok"; > }; > >
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index e92a30c..27be812 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -55,6 +55,8 @@ }; uart1: uart@f7111000 { + assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; + assigned-clock-rates = <150000000>; status = "ok"; };