@@ -1803,7 +1803,28 @@
pinctrl-names = "default";
pinctrl-0 = <&pcie0_default_state>;
+ operating-points-v2 = <&pcie0_opp_table>;
+
status = "disabled";
+
+ pcie0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-1 {
+ opp-level = <1>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-2 {
+ opp-level = <2>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-3 {
+ opp-level = <3>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
};
pcie0_phy: phy@1c06000 {
@@ -1915,7 +1936,33 @@
pinctrl-names = "default";
pinctrl-0 = <&pcie1_default_state>;
+ operating-points-v2 = <&pcie1_opp_table>;
+
status = "disabled";
+
+ pcie1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-1 {
+ opp-level = <1>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-2 {
+ opp-level = <2>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-3 {
+ opp-level = <3>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-4 {
+ opp-level = <4>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
};
pcie1_phy: phy@1c0f000 {
PCIe needs to choose the appropriate performance state of RPMH power domain based up on the PCIe gen speed. So let's add the OPP table support to specify RPMH performance states. Use opp-level for the PCIe gen speed for easier use. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 47 ++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)