diff mbox series

[v2] media: dt-bindings: Convert Omnivision OV7251 to DT schema

Message ID 20230817202713.2180195-1-robh@kernel.org
State Accepted
Commit 274e480982e6d1239be6a236bb457aa95460e1f1
Headers show
Series [v2] media: dt-bindings: Convert Omnivision OV7251 to DT schema | expand

Commit Message

Rob Herring (Arm) Aug. 17, 2023, 8:27 p.m. UTC
Convert the OmniVision OV7251 Image Sensor binding to DT schema format.

vddd-supply was listed as required, but the example and actual user
don't have it. Also, the data brief says it has an internal regulator,
so perhaps it is truly optional.

Add missing common "link-frequencies" which is used and required by the
Linux driver.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
v2:
 - Add link-frequencies which the driver requires
---
 .../devicetree/bindings/i2c/qcom,i2c-cci.yaml |   1 +
 .../devicetree/bindings/media/i2c/ov7251.txt  |  52 ---------
 .../bindings/media/i2c/ovti,ov7251.yaml       | 109 ++++++++++++++++++
 3 files changed, 110 insertions(+), 52 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov7251.txt
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml

Comments

Wolfram Sang Aug. 23, 2023, 9:28 p.m. UTC | #1
On Thu, Aug 17, 2023 at 03:27:13PM -0500, Rob Herring wrote:
> Convert the OmniVision OV7251 Image Sensor binding to DT schema format.
> 
> vddd-supply was listed as required, but the example and actual user
> don't have it. Also, the data brief says it has an internal regulator,
> so perhaps it is truly optional.
> 
> Add missing common "link-frequencies" which is used and required by the
> Linux driver.
> 
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Rob Herring <robh@kernel.org>

Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Rob Herring (Arm) Sept. 5, 2023, 8:54 p.m. UTC | #2
On Thu, 17 Aug 2023 15:27:13 -0500, Rob Herring wrote:
> Convert the OmniVision OV7251 Image Sensor binding to DT schema format.
> 
> vddd-supply was listed as required, but the example and actual user
> don't have it. Also, the data brief says it has an internal regulator,
> so perhaps it is truly optional.
> 
> Add missing common "link-frequencies" which is used and required by the
> Linux driver.
> 
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> v2:
>  - Add link-frequencies which the driver requires
> ---
>  .../devicetree/bindings/i2c/qcom,i2c-cci.yaml |   1 +
>  .../devicetree/bindings/media/i2c/ov7251.txt  |  52 ---------
>  .../bindings/media/i2c/ovti,ov7251.yaml       | 109 ++++++++++++++++++
>  3 files changed, 110 insertions(+), 52 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov7251.txt
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml
> 

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
index ec79b7270437..042d4dc636ee 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -269,6 +269,7 @@  examples:
                 port {
                     ov7251_ep: endpoint {
                         data-lanes = <0 1>;
+                        link-frequencies = /bits/ 64 <240000000 319200000>;
                         remote-endpoint = <&csiphy3_ep>;
                     };
                 };
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7251.txt b/Documentation/devicetree/bindings/media/i2c/ov7251.txt
deleted file mode 100644
index 8281151f7493..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov7251.txt
+++ /dev/null
@@ -1,52 +0,0 @@ 
-* Omnivision 1/7.5-Inch B&W VGA CMOS Digital Image Sensor
-
-The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor
-with an active array size of 640H x 480V. It is programmable through a serial
-I2C interface.
-
-Required Properties:
-- compatible: Value should be "ovti,ov7251".
-- clocks: Reference to the xclk clock.
-- clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock.
-- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
-  to the hardware pin XSHUTDOWN which is physically active low.
-- vdddo-supply: Chip digital IO regulator.
-- vdda-supply: Chip analog regulator.
-- vddd-supply: Chip digital core regulator.
-
-The device node shall contain one 'port' child node with a single 'endpoint'
-subnode for its digital output video port, in accordance with the video
-interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	&i2c1 {
-		...
-
-		ov7251: camera-sensor@60 {
-			compatible = "ovti,ov7251";
-			reg = <0x60>;
-
-			enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&camera_bw_default>;
-
-			clocks = <&clks 200>;
-			clock-names = "xclk";
-			clock-frequency = <24000000>;
-
-			vdddo-supply = <&camera_dovdd_1v8>;
-			vdda-supply = <&camera_avdd_2v8>;
-			vddd-supply = <&camera_dvdd_1v2>;
-
-			port {
-				ov7251_ep: endpoint {
-					clock-lanes = <1>;
-					data-lanes = <0>;
-					remote-endpoint = <&csi0_ep>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml
new file mode 100644
index 000000000000..2e5187acbbb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml
@@ -0,0 +1,109 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV7251 Image Sensor
+
+description:
+  The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor
+  with an active array size of 640H x 480V. It is programmable through a serial
+  I2C interface.
+
+maintainers:
+  - Todor Tomov <todor.too@gmail.com>
+
+properties:
+  compatible:
+    const: ovti,ov7251
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  clock-names:
+    const: xclk
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz.
+
+  vdda-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  vddd-supply:
+    description: Digital core voltage supply, 1.2 volts
+
+  vdddo-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the XSHUTDOWN pin, if any. Polarity
+      is GPIO_ACTIVE_HIGH.
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          clock-lanes:
+            maximum: 1
+
+          data-lanes:
+            maxItems: 1
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdddo-supply
+  - vdda-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "ovti,ov7251";
+            reg = <0x3c>;
+            clocks = <&clks 1>;
+            clock-frequency = <24000000>;
+            vdddo-supply = <&ov7251_vdddo_1v8>;
+            vdda-supply = <&ov7251_vdda_2v8>;
+            vddd-supply = <&ov7251_vddd_1v5>;
+            enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+
+            port {
+                ov7251_ep: endpoint {
+                    remote-endpoint = <&csi0_ep>;
+                    clock-lanes = <1>;
+                    data-lanes = <0>;
+                    link-frequencies = /bits/ 64 <240000000 319200000>;
+                };
+            };
+        };
+    };
+...