diff mbox series

[2/2] ARM: dts: qcom: ipq4019-ap.dk01.1: align flash node with bindings

Message ID 20230811210142.403160-2-robimarko@gmail.com
State Accepted
Commit 111bc3710caa7e55bc0040ffa57cec83e09dac07
Headers show
Series [1/2] ARM: dts: qcom: ipq4019-ap.dk01.1: use existing labels for nodes | expand

Commit Message

Robert Marko Aug. 11, 2023, 9:01 p.m. UTC 
Rename the SPI-NOR node to flash@0, remove #address-cells and #size-cells
as they should be under the partitions subnode and use the generic
jedec,spi-nor compatible.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
index 0714616c9e45..f7ac8f9d0b6f 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
@@ -75,11 +75,9 @@  &blsp1_spi1 {
 	status = "okay";
 	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
-	mx25l25635e@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
+	flash@0 {
 		reg = <0>;
-		compatible = "mx25l25635e";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <24000000>;
 	};
 };