diff mbox series

[3/3] gpio: sprd: Add clear interrupt

Message ID 20230808033144.2276-1-Wenhua.Lin@unisoc.com
State New
Headers show
Series [1/3] gpio: sprd: Modify the calculation method of eic number | expand

Commit Message

Wenhua Lin Aug. 8, 2023, 3:31 a.m. UTC 
Clear interrupt after set the interrupt type.

Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
---
 drivers/gpio/gpio-eic-sprd.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Andy Shevchenko Aug. 8, 2023, 1:25 p.m. UTC | #1 
On Tue, Aug 08, 2023 at 11:31:44AM +0800, Wenhua Lin wrote:
> Clear interrupt after set the interrupt type.

Why?

Can't it be done in the ->init_hw() callback of GPIO IRQ chip?
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
index c506cfd6df8e..31125f53bc97 100644
--- a/drivers/gpio/gpio-eic-sprd.c
+++ b/drivers/gpio/gpio-eic-sprd.c
@@ -374,29 +374,34 @@  static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_EDGE_FALLING:
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_EDGE_BOTH:
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_LEVEL_HIGH:
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_level_irq);
 			break;
 		case IRQ_TYPE_LEVEL_LOW:
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_level_irq);
 			break;
 		default:
@@ -409,29 +414,34 @@  static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_EDGE_FALLING:
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_EDGE_BOTH:
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_LEVEL_HIGH:
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_level_irq);
 			break;
 		case IRQ_TYPE_LEVEL_LOW:
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_level_irq);
 			break;
 		default: