diff mbox

[RESEND,2/5] dmaengine: Add ADM driver

Message ID 1467150186-11427-3-git-send-email-twp@codeaurora.org
State New
Headers show

Commit Message

Thomas Pedersen June 28, 2016, 9:43 p.m. UTC
From: Andy Gross <andy.gross@linaro.org>


Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
controller found in the MSM8x60 and IPQ/APQ8064 platforms.

The ADM supports both memory to memory transactions and memory
to/from peripheral device transactions.  The controller also provides flow
control capabilities for transactions to/from peripheral devices.

The initial release of this driver supports slave transfers to/from peripherals
and also incorporates CRCI (client rate control interface) flow control.

Signed-off-by: Andy Gross <andy.gross@linaro.org>

Signed-off-by: Thomas Pedersen <twp@codeaurora.org>

---
 drivers/dma/qcom/Kconfig    |  10 +
 drivers/dma/qcom/Makefile   |   1 +
 drivers/dma/qcom/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 911 insertions(+)
 create mode 100644 drivers/dma/qcom/qcom_adm.c

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Zoran Markovic Dec. 22, 2016, 5:55 p.m. UTC | #1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--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Neil Armstrong Dec. 23, 2016, 7:53 p.m. UTC | #2
Le 22/12/2016 18:55, Zoran Markovic a écrit :
>> Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA

>> controller found in the MSM8x60 and IPQ/APQ8064 platforms.

> 

> With minor changes I got this working on MDM9615, using qcom_nand. Below are the changes I had to make, please consider them. Patches for MDM9615 NAND are pending.

> 

>> +static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,

>> +	struct scatterlist *sgl, unsigned int sg_len,

>> +	enum dma_transfer_direction direction, unsigned long flags,

>> +	void *context)

>> +{

> ...

> 

>> +	/* if using flow control, validate burst and crci values */

>> +	if (achan->slave.device_fc) {

>> +

>> +		blk_size = adm_get_blksize(burst);

>> +		if (blk_size < 0) {

>> +			dev_err(adev->dev, "invalid burst value: %d\n",

>> +				burst);

>> +			return ERR_PTR(-EINVAL);

> Return NULL here, most DMA clients (including qcom_nand) expect NULL if prep_slave_sg() fails.

>> +		}

>> +

>> +		crci = achan->slave.slave_id & 0xf;

>> +		if (!crci || achan->slave.slave_id > 0x1f) {

>> +			dev_err(adev->dev, "invalid crci value\n");

>> +			return ERR_PTR(-EINVAL);

> Ditto above.

>> +		}

>> +	}

>> +

>> +	/* iterate through sgs and compute allocation size of structures */

>> +	for_each_sg(sgl, sg, sg_len, i) {

>> +		if (achan->slave.device_fc) {

>> +			box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,

>> +						  ADM_MAX_ROWS);

>> +			if (sg_dma_len(sg) % burst)

>> +				single_count++;

>> +		} else {

>> +			single_count += DIV_ROUND_UP(sg_dma_len(sg),

>> +						     ADM_MAX_XFER);

>> +		}

>> +	}

>> +

>> +	async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);

>> +	if (!async_desc)

>> +		return ERR_PTR(-ENOMEM);

> Ditto above.

> 

>> +

>> +	if (crci)

>> +		async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?

>> +					ADM_CRCI_CTL_MUX_SEL : 0;

>> +	async_desc->crci = crci;

>> +	async_desc->blk_size = blk_size;

>> +	async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +

>> +				box_count * sizeof(struct adm_desc_hw_box) +

>> +				sizeof(*cple) + 2 * ADM_DESC_ALIGN;

>> +

>> +	async_desc->cpl = dma_alloc_writecombine(adev->dev, async_desc->dma_len,

>> +				&async_desc->dma_addr, GFP_NOWAIT);

> Under pressure this allocation might fail, resulting in NAND errors. I handled it using wait_event_timeout() to wait until buffers are available. Either that, or clients such as qcom_nand need to handle this failure.

> 

>> +

>> +	if (!async_desc->cpl) {

>> +		kfree(async_desc);

>> +		return ERR_PTR(-ENOMEM);

> Return NULL.

>> +	}

> ...

>> +}

> ...

> 

>> +static void adm_dma_free_desc(struct virt_dma_desc *vd) {

>> +	struct adm_async_desc *async_desc = container_of(vd,

>> +			struct adm_async_desc, vd);

>> +

>> +	dma_free_writecombine(async_desc->adev->dev, async_desc->dma_len,

>> +		async_desc->cpl, async_desc->dma_addr);

>> +	kfree(async_desc);

> Do wake_up() here to signal buffer availability.

>> +}

> 

> Regards, Zoran

> 


Hi Zoran,

These are also the fixes we needed to make the ADM work on MDM9615.

Andy, do you plan to resend this driver ?

Neil
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andy Gross Dec. 27, 2016, 4:51 p.m. UTC | #3
On Fri, Dec 23, 2016 at 08:53:09PM +0100, Neil Armstrong wrote:
> 

> 

> Le 22/12/2016 18:55, Zoran Markovic a écrit :

> >> Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA

> >> controller found in the MSM8x60 and IPQ/APQ8064 platforms.

> > 

> > With minor changes I got this working on MDM9615, using qcom_nand. Below are the changes I had to make, please consider them. Patches for MDM9615 NAND are pending.

> > 

> >> +static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,

> >> +	struct scatterlist *sgl, unsigned int sg_len,

> >> +	enum dma_transfer_direction direction, unsigned long flags,

> >> +	void *context)

> >> +{

> > ...

> > 

> >> +	/* if using flow control, validate burst and crci values */

> >> +	if (achan->slave.device_fc) {

> >> +

> >> +		blk_size = adm_get_blksize(burst);

> >> +		if (blk_size < 0) {

> >> +			dev_err(adev->dev, "invalid burst value: %d\n",

> >> +				burst);

> >> +			return ERR_PTR(-EINVAL);

> > Return NULL here, most DMA clients (including qcom_nand) expect NULL if prep_slave_sg() fails.

> >> +		}

> >> +

> >> +		crci = achan->slave.slave_id & 0xf;

> >> +		if (!crci || achan->slave.slave_id > 0x1f) {

> >> +			dev_err(adev->dev, "invalid crci value\n");

> >> +			return ERR_PTR(-EINVAL);

> > Ditto above.

> >> +		}

> >> +	}

> >> +

> >> +	/* iterate through sgs and compute allocation size of structures */

> >> +	for_each_sg(sgl, sg, sg_len, i) {

> >> +		if (achan->slave.device_fc) {

> >> +			box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,

> >> +						  ADM_MAX_ROWS);

> >> +			if (sg_dma_len(sg) % burst)

> >> +				single_count++;

> >> +		} else {

> >> +			single_count += DIV_ROUND_UP(sg_dma_len(sg),

> >> +						     ADM_MAX_XFER);

> >> +		}

> >> +	}

> >> +

> >> +	async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);

> >> +	if (!async_desc)

> >> +		return ERR_PTR(-ENOMEM);

> > Ditto above.

> > 

> >> +

> >> +	if (crci)

> >> +		async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?

> >> +					ADM_CRCI_CTL_MUX_SEL : 0;

> >> +	async_desc->crci = crci;

> >> +	async_desc->blk_size = blk_size;

> >> +	async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +

> >> +				box_count * sizeof(struct adm_desc_hw_box) +

> >> +				sizeof(*cple) + 2 * ADM_DESC_ALIGN;

> >> +

> >> +	async_desc->cpl = dma_alloc_writecombine(adev->dev, async_desc->dma_len,

> >> +				&async_desc->dma_addr, GFP_NOWAIT);

> > Under pressure this allocation might fail, resulting in NAND errors. I handled it using wait_event_timeout() to wait until buffers are available. Either that, or clients such as qcom_nand need to handle this failure.


prep_slave_sg calls can be made from atomic context.  Which is why we do the
GFP_NOWAIT.  You can't sleep in that function.  Instead, the client needs to see
that it got ENOMEM and deal with the memory pressure itself.  Either that or we
need to relax the dma_alloc to a dma_alloc_coherent (I suspect you'll still have
the same problem).  Or you need to increase the static dma pool.

I've seen this issue with people using ADM w/ SPI.  They had other dma pool
pressure and the ADM transfers would fail to get buffers.

> > 

> >> +

> >> +	if (!async_desc->cpl) {

> >> +		kfree(async_desc);

> >> +		return ERR_PTR(-ENOMEM);

> > Return NULL.

> >> +	}

> > ...

> >> +}

> > ...

> > 

> >> +static void adm_dma_free_desc(struct virt_dma_desc *vd) {

> >> +	struct adm_async_desc *async_desc = container_of(vd,

> >> +			struct adm_async_desc, vd);

> >> +

> >> +	dma_free_writecombine(async_desc->adev->dev, async_desc->dma_len,

> >> +		async_desc->cpl, async_desc->dma_addr);

> >> +	kfree(async_desc);

> > Do wake_up() here to signal buffer availability.

> >> +}

> > 

> > Regards, Zoran

> > 

> 

> Hi Zoran,

> 

> These are also the fixes we needed to make the ADM work on MDM9615.

> 

> Andy, do you plan to resend this driver ?


The main outstanding comments I had were specific to the crci encoding and the
use of a virtual channel to encapsulate the crci information instead of using
the slave_config.  I don't see that being done.

I haven't had time to address that and I was hoping that Thomas would do it.
But it seems like he moved on to other things, so I need to put this on my list.


Andy
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
index a7761c4..a88769e 100644
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -27,3 +27,13 @@  config QCOM_HIDMA
 	  (user to kernel, kernel to kernel, etc.).  It only supports
 	  memcpy interface. The core is not intended for general
 	  purpose slave DMA.
+
+config QCOM_ADM
+	tristate "Qualcomm ADM support"
+	depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	---help---
+	  Enable support for the Qualcomm ADM DMA controller.  This controller
+	  provides DMA capabilities for both general purpose and on-chip
+	  peripheral devices.
diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
index 4bfc38b..b557769 100644
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -3,3 +3,4 @@  obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
 hdma_mgmt-objs	 := hidma_mgmt.o hidma_mgmt_sys.o
 obj-$(CONFIG_QCOM_HIDMA) +=  hdma.o
 hdma-objs        := hidma_ll.o hidma.o hidma_dbg.o
+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
diff --git a/drivers/dma/qcom/qcom_adm.c b/drivers/dma/qcom/qcom_adm.c
new file mode 100644
index 0000000..e4485f3
--- /dev/null
+++ b/drivers/dma/qcom/qcom_adm.c
@@ -0,0 +1,900 @@ 
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_dma.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+
+#include "../dmaengine.h"
+#include "../virt-dma.h"
+
+/* ADM registers - calculated from channel number and security domain */
+#define ADM_CHAN_MULTI			0x4
+#define ADM_CI_MULTI			0x4
+#define ADM_CRCI_MULTI			0x4
+#define ADM_EE_MULTI			0x800
+#define ADM_CHAN_OFFS(chan)		(ADM_CHAN_MULTI * chan)
+#define ADM_EE_OFFS(ee)			(ADM_EE_MULTI * ee)
+#define ADM_CHAN_EE_OFFS(chan, ee)	(ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
+#define ADM_CHAN_OFFS(chan)		(ADM_CHAN_MULTI * chan)
+#define ADM_CI_OFFS(ci)			(ADM_CHAN_OFF(ci))
+#define ADM_CH_CMD_PTR(chan, ee)	(ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_RSLT(chan, ee)		(0x40 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_FLUSH_STATE0(chan, ee)	(0x80 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_STATUS_SD(chan, ee)	(0x200 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_CONF(chan)		(0x240 + ADM_CHAN_OFFS(chan))
+#define ADM_CH_RSLT_CONF(chan, ee)	(0x300 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee)	(0x380 + ADM_EE_OFFS(ee))
+#define ADM_CI_CONF(ci)			(0x390 + ci * ADM_CI_MULTI)
+#define ADM_GP_CTL			0x3d8
+#define ADM_CRCI_CTL(crci, ee)		(0x400 + crci * ADM_CRCI_MULTI + \
+						ADM_EE_OFFS(ee))
+
+/* channel status */
+#define ADM_CH_STATUS_VALID	BIT(1)
+
+/* channel result */
+#define ADM_CH_RSLT_VALID	BIT(31)
+#define ADM_CH_RSLT_ERR		BIT(3)
+#define ADM_CH_RSLT_FLUSH	BIT(2)
+#define ADM_CH_RSLT_TPD		BIT(1)
+
+/* channel conf */
+#define ADM_CH_CONF_SHADOW_EN		BIT(12)
+#define ADM_CH_CONF_MPU_DISABLE		BIT(11)
+#define ADM_CH_CONF_PERM_MPU_CONF	BIT(9)
+#define ADM_CH_CONF_FORCE_RSLT_EN	BIT(7)
+#define ADM_CH_CONF_SEC_DOMAIN(ee)	(((ee & 0x3) << 4) | ((ee & 0x4) << 11))
+
+/* channel result conf */
+#define ADM_CH_RSLT_CONF_FLUSH_EN	BIT(1)
+#define ADM_CH_RSLT_CONF_IRQ_EN		BIT(0)
+
+/* CRCI CTL */
+#define ADM_CRCI_CTL_MUX_SEL	BIT(18)
+#define ADM_CRCI_CTL_RST	BIT(17)
+
+/* CI configuration */
+#define ADM_CI_RANGE_END(x)	(x << 24)
+#define ADM_CI_RANGE_START(x)	(x << 16)
+#define ADM_CI_BURST_4_WORDS	BIT(2)
+#define ADM_CI_BURST_8_WORDS	BIT(3)
+
+/* GP CTL */
+#define ADM_GP_CTL_LP_EN	BIT(12)
+#define ADM_GP_CTL_LP_CNT(x)	(x << 8)
+
+/* Command pointer list entry */
+#define ADM_CPLE_LP		BIT(31)
+#define ADM_CPLE_CMD_PTR_LIST	BIT(29)
+
+/* Command list entry */
+#define ADM_CMD_LC		BIT(31)
+#define ADM_CMD_DST_CRCI(n)	(((n) & 0xf) << 7)
+#define ADM_CMD_SRC_CRCI(n)	(((n) & 0xf) << 3)
+
+#define ADM_CMD_TYPE_SINGLE	0x0
+#define ADM_CMD_TYPE_BOX	0x3
+
+#define ADM_CRCI_MUX_SEL	BIT(4)
+#define ADM_DESC_ALIGN		8
+#define ADM_MAX_XFER		(SZ_64K-1)
+#define ADM_MAX_ROWS		(SZ_64K-1)
+#define ADM_MAX_CHANNELS	16
+
+struct adm_desc_hw_box {
+	u32 cmd;
+	u32 src_addr;
+	u32 dst_addr;
+	u32 row_len;
+	u32 num_rows;
+	u32 row_offset;
+};
+
+struct adm_desc_hw_single {
+	u32 cmd;
+	u32 src_addr;
+	u32 dst_addr;
+	u32 len;
+};
+
+struct adm_async_desc {
+	struct virt_dma_desc vd;
+	struct adm_device *adev;
+
+	size_t length;
+	enum dma_transfer_direction dir;
+	dma_addr_t dma_addr;
+	size_t dma_len;
+
+	void *cpl;
+	dma_addr_t cp_addr;
+	u32 crci;
+	u32 mux;
+	u32 blk_size;
+};
+
+struct adm_chan {
+	struct virt_dma_chan vc;
+	struct adm_device *adev;
+
+	/* parsed from DT */
+	u32 id;			/* channel id */
+
+	struct adm_async_desc *curr_txd;
+	struct dma_slave_config slave;
+	struct list_head node;
+
+	int error;
+	int initialized;
+};
+
+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
+{
+	return container_of(common, struct adm_chan, vc.chan);
+}
+
+struct adm_device {
+	void __iomem *regs;
+	struct device *dev;
+	struct dma_device common;
+	struct device_dma_parameters dma_parms;
+	struct adm_chan *channels;
+
+	u32 ee;
+
+	struct clk *core_clk;
+	struct clk *iface_clk;
+
+	struct reset_control *clk_reset;
+	struct reset_control *c0_reset;
+	struct reset_control *c1_reset;
+	struct reset_control *c2_reset;
+	int irq;
+};
+
+/**
+ * adm_free_chan - Frees dma resources associated with the specific channel
+ *
+ * Free all allocated descriptors associated with this channel
+ *
+ */
+static void adm_free_chan(struct dma_chan *chan)
+{
+	/* free all queued descriptors */
+	vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+/**
+ * adm_get_blksize - Get block size from burst value
+ *
+ */
+static int adm_get_blksize(unsigned int burst)
+{
+	int ret;
+
+	switch (burst) {
+	case 16:
+	case 32:
+	case 64:
+	case 128:
+		ret = ffs(burst>>4) - 1;
+		break;
+	case 192:
+		ret = 4;
+		break;
+	case 256:
+		ret = 5;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+/**
+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @crci: CRCI value
+ * @burst: Burst size of transaction
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_fc_descriptors(struct adm_chan *achan,
+	void *desc, struct scatterlist *sg, u32 crci, u32 burst,
+	enum dma_transfer_direction direction)
+{
+	struct adm_desc_hw_box *box_desc = NULL;
+	struct adm_desc_hw_single *single_desc;
+	u32 remainder = sg_dma_len(sg);
+	u32 rows, row_offset, crci_cmd;
+	u32 mem_addr = sg_dma_address(sg);
+	u32 *incr_addr = &mem_addr;
+	u32 *src, *dst;
+
+	if (direction == DMA_DEV_TO_MEM) {
+		crci_cmd = ADM_CMD_SRC_CRCI(crci);
+		row_offset = burst;
+		src = &achan->slave.src_addr;
+		dst = &mem_addr;
+	} else {
+		crci_cmd = ADM_CMD_DST_CRCI(crci);
+		row_offset = burst << 16;
+		src = &mem_addr;
+		dst = &achan->slave.dst_addr;
+	}
+
+	while (remainder >= burst) {
+		box_desc = desc;
+		box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
+		box_desc->row_offset = row_offset;
+		box_desc->src_addr = *src;
+		box_desc->dst_addr = *dst;
+
+		rows = remainder / burst;
+		rows = min_t(u32, rows, ADM_MAX_ROWS);
+		box_desc->num_rows = rows << 16 | rows;
+		box_desc->row_len = burst << 16 | burst;
+
+		*incr_addr += burst * rows;
+		remainder -= burst * rows;
+		desc += sizeof(*box_desc);
+	}
+
+	/* if leftover bytes, do one single descriptor */
+	if (remainder) {
+		single_desc = desc;
+		single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
+		single_desc->len = remainder;
+		single_desc->src_addr = *src;
+		single_desc->dst_addr = *dst;
+		desc += sizeof(*single_desc);
+
+		if (sg_is_last(sg))
+			single_desc->cmd |= ADM_CMD_LC;
+	} else {
+		if (box_desc && sg_is_last(sg))
+			box_desc->cmd |= ADM_CMD_LC;
+	}
+
+	return desc;
+}
+
+/**
+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_non_fc_descriptors(struct adm_chan *achan,
+	void *desc, struct scatterlist *sg,
+	enum dma_transfer_direction direction)
+{
+	struct adm_desc_hw_single *single_desc;
+	u32 remainder = sg_dma_len(sg);
+	u32 mem_addr = sg_dma_address(sg);
+	u32 *incr_addr = &mem_addr;
+	u32 *src, *dst;
+
+	if (direction == DMA_DEV_TO_MEM) {
+		src = &achan->slave.src_addr;
+		dst = &mem_addr;
+	} else {
+		src = &mem_addr;
+		dst = &achan->slave.dst_addr;
+	}
+
+	do {
+		single_desc = desc;
+		single_desc->cmd = ADM_CMD_TYPE_SINGLE;
+		single_desc->src_addr = *src;
+		single_desc->dst_addr = *dst;
+		single_desc->len = (remainder > ADM_MAX_XFER) ?
+				ADM_MAX_XFER : remainder;
+
+		remainder -= single_desc->len;
+		*incr_addr += single_desc->len;
+		desc += sizeof(*single_desc);
+	} while (remainder);
+
+	/* set last command if this is the end of the whole transaction */
+	if (sg_is_last(sg))
+		single_desc->cmd |= ADM_CMD_LC;
+
+	return desc;
+}
+
+/**
+ * adm_prep_slave_sg - Prep slave sg transaction
+ *
+ * @chan: dma channel
+ * @sgl: scatter gather list
+ * @sg_len: length of sg
+ * @direction: DMA transfer direction
+ * @flags: DMA flags
+ * @context: transfer context (unused)
+ */
+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
+	struct scatterlist *sgl, unsigned int sg_len,
+	enum dma_transfer_direction direction, unsigned long flags,
+	void *context)
+{
+	struct adm_chan *achan = to_adm_chan(chan);
+	struct adm_device *adev = achan->adev;
+	struct adm_async_desc *async_desc;
+	struct scatterlist *sg;
+	u32 i, burst;
+	u32 single_count = 0, box_count = 0, crci = 0;
+	void *desc;
+	u32 *cple;
+	int blk_size = 0;
+
+	if (!is_slave_direction(direction)) {
+		dev_err(adev->dev, "invalid dma direction\n");
+		return NULL;
+	}
+
+	/*
+	 * get burst value from slave configuration
+	 */
+	burst = (direction == DMA_MEM_TO_DEV) ?
+		achan->slave.dst_maxburst :
+		achan->slave.src_maxburst;
+
+	/* if using flow control, validate burst and crci values */
+	if (achan->slave.device_fc) {
+
+		blk_size = adm_get_blksize(burst);
+		if (blk_size < 0) {
+			dev_err(adev->dev, "invalid burst value: %d\n",
+				burst);
+			return ERR_PTR(-EINVAL);
+		}
+
+		crci = achan->slave.slave_id & 0xf;
+		if (!crci || achan->slave.slave_id > 0x1f) {
+			dev_err(adev->dev, "invalid crci value\n");
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
+	/* iterate through sgs and compute allocation size of structures */
+	for_each_sg(sgl, sg, sg_len, i) {
+		if (achan->slave.device_fc) {
+			box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
+						  ADM_MAX_ROWS);
+			if (sg_dma_len(sg) % burst)
+				single_count++;
+		} else {
+			single_count += DIV_ROUND_UP(sg_dma_len(sg),
+						     ADM_MAX_XFER);
+		}
+	}
+
+	async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
+	if (!async_desc)
+		return ERR_PTR(-ENOMEM);
+
+	if (crci)
+		async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
+					ADM_CRCI_CTL_MUX_SEL : 0;
+	async_desc->crci = crci;
+	async_desc->blk_size = blk_size;
+	async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
+				box_count * sizeof(struct adm_desc_hw_box) +
+				sizeof(*cple) + 2 * ADM_DESC_ALIGN;
+
+	async_desc->cpl = dma_alloc_writecombine(adev->dev, async_desc->dma_len,
+				&async_desc->dma_addr, GFP_NOWAIT);
+
+	if (!async_desc->cpl) {
+		kfree(async_desc);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	async_desc->adev = adev;
+
+	/* both command list entry and descriptors must be 8 byte aligned */
+	cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
+	desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
+
+	/* init cmd list */
+	*cple = ADM_CPLE_LP;
+	*cple |= (desc - async_desc->cpl + async_desc->dma_addr) >> 3;
+
+	for_each_sg(sgl, sg, sg_len, i) {
+		async_desc->length += sg_dma_len(sg);
+
+		if (achan->slave.device_fc)
+			desc = adm_process_fc_descriptors(achan, desc, sg, crci,
+							burst, direction);
+		else
+			desc = adm_process_non_fc_descriptors(achan, desc, sg,
+							   direction);
+	}
+
+	return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
+}
+
+/**
+ * adm_terminate_all - terminate all transactions on a channel
+ * @achan: adm dma channel
+ *
+ * Dequeues and frees all transactions, aborts current transaction
+ * No callbacks are done
+ *
+ */
+static int adm_terminate_all(struct dma_chan *chan)
+{
+	struct adm_chan *achan = to_adm_chan(chan);
+	struct adm_device *adev = achan->adev;
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	spin_lock_irqsave(&achan->vc.lock, flags);
+	vchan_get_all_descriptors(&achan->vc, &head);
+
+	/* send flush command to terminate current transaction */
+	writel_relaxed(0x0,
+		adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
+
+	spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+	vchan_dma_desc_free_list(&achan->vc, &head);
+
+	return 0;
+}
+
+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
+{
+	struct adm_chan *achan = to_adm_chan(chan);
+	unsigned long flag;
+
+	spin_lock_irqsave(&achan->vc.lock, flag);
+	memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
+	spin_unlock_irqrestore(&achan->vc.lock, flag);
+
+	return 0;
+}
+
+/**
+ * adm_start_dma - start next transaction
+ * @achan - ADM dma channel
+ */
+static void adm_start_dma(struct adm_chan *achan)
+{
+	struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
+	struct adm_device *adev = achan->adev;
+	struct adm_async_desc *async_desc;
+
+	lockdep_assert_held(&achan->vc.lock);
+
+	if (!vd)
+		return;
+
+	list_del(&vd->node);
+
+	/* write next command list out to the CMD FIFO */
+	async_desc = container_of(vd, struct adm_async_desc, vd);
+	achan->curr_txd = async_desc;
+
+	/* reset channel error */
+	achan->error = 0;
+
+	if (!achan->initialized) {
+		/* enable interrupts */
+		writel(ADM_CH_CONF_SHADOW_EN |
+		       ADM_CH_CONF_PERM_MPU_CONF |
+		       ADM_CH_CONF_MPU_DISABLE |
+		       ADM_CH_CONF_SEC_DOMAIN(adev->ee),
+		       adev->regs + ADM_CH_CONF(achan->id));
+
+		writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
+			adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+		achan->initialized = 1;
+	}
+
+	/* set the crci block size if this transaction requires CRCI */
+	if (async_desc->crci) {
+		writel(async_desc->mux | async_desc->blk_size,
+			adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
+	}
+
+	/* make sure IRQ enable doesn't get reordered */
+	wmb();
+
+	/* write next command list out to the CMD FIFO */
+	writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
+		adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
+}
+
+/**
+ * adm_dma_irq - irq handler for ADM controller
+ * @irq: IRQ of interrupt
+ * @data: callback data
+ *
+ * IRQ handler for the bam controller
+ */
+static irqreturn_t adm_dma_irq(int irq, void *data)
+{
+	struct adm_device *adev = data;
+	u32 srcs, i;
+	struct adm_async_desc *async_desc;
+	unsigned long flags;
+
+	srcs = readl_relaxed(adev->regs +
+			ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
+
+	for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+		struct adm_chan *achan = &adev->channels[i];
+		u32 status, result;
+
+		if (srcs & BIT(i)) {
+			status = readl_relaxed(adev->regs +
+				ADM_CH_STATUS_SD(i, adev->ee));
+
+			/* if no result present, skip */
+			if (!(status & ADM_CH_STATUS_VALID))
+				continue;
+
+			result = readl_relaxed(adev->regs +
+				ADM_CH_RSLT(i, adev->ee));
+
+			/* no valid results, skip */
+			if (!(result & ADM_CH_RSLT_VALID))
+				continue;
+
+			/* flag error if transaction was flushed or failed */
+			if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
+				achan->error = 1;
+
+			spin_lock_irqsave(&achan->vc.lock, flags);
+			async_desc = achan->curr_txd;
+
+			achan->curr_txd = NULL;
+
+			if (async_desc) {
+				vchan_cookie_complete(&async_desc->vd);
+
+				/* kick off next DMA */
+				adm_start_dma(achan);
+			}
+
+			spin_unlock_irqrestore(&achan->vc.lock, flags);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * adm_tx_status - returns status of transaction
+ * @chan: dma channel
+ * @cookie: transaction cookie
+ * @txstate: DMA transaction state
+ *
+ * Return status of dma transaction
+ */
+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+	struct dma_tx_state *txstate)
+{
+	struct adm_chan *achan = to_adm_chan(chan);
+	struct virt_dma_desc *vd;
+	enum dma_status ret;
+	unsigned long flags;
+	size_t residue = 0;
+
+	ret = dma_cookie_status(chan, cookie, txstate);
+	if (ret == DMA_COMPLETE || !txstate)
+		return ret;
+
+	spin_lock_irqsave(&achan->vc.lock, flags);
+
+	vd = vchan_find_desc(&achan->vc, cookie);
+	if (vd)
+		residue = container_of(vd, struct adm_async_desc, vd)->length;
+
+	spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+	/*
+	 * residue is either the full length if it is in the issued list, or 0
+	 * if it is in progress.  We have no reliable way of determining
+	 * anything inbetween
+	*/
+	dma_set_residue(txstate, residue);
+
+	if (achan->error)
+		return DMA_ERROR;
+
+	return ret;
+}
+
+/**
+ * adm_issue_pending - starts pending transactions
+ * @chan: dma channel
+ *
+ * Issues all pending transactions and starts DMA
+ */
+static void adm_issue_pending(struct dma_chan *chan)
+{
+	struct adm_chan *achan = to_adm_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&achan->vc.lock, flags);
+
+	if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
+		adm_start_dma(achan);
+	spin_unlock_irqrestore(&achan->vc.lock, flags);
+}
+
+/**
+ * adm_dma_free_desc - free descriptor memory
+ * @vd: virtual descriptor
+ *
+ */
+static void adm_dma_free_desc(struct virt_dma_desc *vd)
+{
+	struct adm_async_desc *async_desc = container_of(vd,
+			struct adm_async_desc, vd);
+
+	dma_free_writecombine(async_desc->adev->dev, async_desc->dma_len,
+		async_desc->cpl, async_desc->dma_addr);
+	kfree(async_desc);
+}
+
+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
+	u32 index)
+{
+	achan->id = index;
+	achan->adev = adev;
+
+	vchan_init(&achan->vc, &adev->common);
+	achan->vc.desc_free = adm_dma_free_desc;
+}
+
+static int adm_dma_probe(struct platform_device *pdev)
+{
+	struct adm_device *adev;
+	struct resource *iores;
+	int ret;
+	u32 i;
+
+	adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
+	if (!adev)
+		return -ENOMEM;
+
+	adev->dev = &pdev->dev;
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	adev->regs = devm_ioremap_resource(&pdev->dev, iores);
+	if (IS_ERR(adev->regs))
+		return PTR_ERR(adev->regs);
+
+	adev->irq = platform_get_irq(pdev, 0);
+	if (adev->irq < 0)
+		return adev->irq;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
+	if (ret) {
+		dev_err(adev->dev, "Execution environment unspecified\n");
+		return ret;
+	}
+
+	adev->core_clk = devm_clk_get(adev->dev, "core");
+	if (IS_ERR(adev->core_clk))
+		return PTR_ERR(adev->core_clk);
+
+	ret = clk_prepare_enable(adev->core_clk);
+	if (ret) {
+		dev_err(adev->dev, "failed to prepare/enable core clock\n");
+		return ret;
+	}
+
+	adev->iface_clk = devm_clk_get(adev->dev, "iface");
+	if (IS_ERR(adev->iface_clk)) {
+		ret = PTR_ERR(adev->iface_clk);
+		goto err_disable_core_clk;
+	}
+
+	ret = clk_prepare_enable(adev->iface_clk);
+	if (ret) {
+		dev_err(adev->dev, "failed to prepare/enable iface clock\n");
+		goto err_disable_core_clk;
+	}
+
+	adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
+	if (IS_ERR(adev->clk_reset)) {
+		dev_err(adev->dev, "failed to get ADM0 reset\n");
+		ret = PTR_ERR(adev->clk_reset);
+		goto err_disable_clks;
+	}
+
+	adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
+	if (IS_ERR(adev->c0_reset)) {
+		dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
+		ret = PTR_ERR(adev->c0_reset);
+		goto err_disable_clks;
+	}
+
+	adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
+	if (IS_ERR(adev->c1_reset)) {
+		dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
+		ret = PTR_ERR(adev->c1_reset);
+		goto err_disable_clks;
+	}
+
+	adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
+	if (IS_ERR(adev->c2_reset)) {
+		dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
+		ret = PTR_ERR(adev->c2_reset);
+		goto err_disable_clks;
+	}
+
+	reset_control_assert(adev->clk_reset);
+	reset_control_assert(adev->c0_reset);
+	reset_control_assert(adev->c1_reset);
+	reset_control_assert(adev->c2_reset);
+
+	reset_control_deassert(adev->clk_reset);
+	reset_control_deassert(adev->c0_reset);
+	reset_control_deassert(adev->c1_reset);
+	reset_control_deassert(adev->c2_reset);
+
+	adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
+				sizeof(*adev->channels), GFP_KERNEL);
+
+	if (!adev->channels) {
+		ret = -ENOMEM;
+		goto err_disable_clks;
+	}
+
+	/* allocate and initialize channels */
+	INIT_LIST_HEAD(&adev->common.channels);
+
+	for (i = 0; i < ADM_MAX_CHANNELS; i++)
+		adm_channel_init(adev, &adev->channels[i], i);
+
+	/* reset CRCIs */
+	for (i = 0; i < 16; i++)
+		writel(ADM_CRCI_CTL_RST, adev->regs +
+			ADM_CRCI_CTL(i, adev->ee));
+
+	/* configure client interfaces */
+	writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
+		ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
+	writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
+		ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
+	writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
+		ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
+	writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
+		adev->regs + ADM_GP_CTL);
+
+	ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
+			0, "adm_dma", adev);
+	if (ret)
+		goto err_disable_clks;
+
+	platform_set_drvdata(pdev, adev);
+
+	adev->common.dev = adev->dev;
+	adev->common.dev->dma_parms = &adev->dma_parms;
+
+	/* set capabilities */
+	dma_cap_zero(adev->common.cap_mask);
+	dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
+	dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
+
+	/* initialize dmaengine apis */
+	adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
+	adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+	adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	adev->common.device_free_chan_resources = adm_free_chan;
+	adev->common.device_prep_slave_sg = adm_prep_slave_sg;
+	adev->common.device_issue_pending = adm_issue_pending;
+	adev->common.device_tx_status = adm_tx_status;
+	adev->common.device_terminate_all = adm_terminate_all;
+	adev->common.device_config = adm_slave_config;
+
+	ret = dma_async_device_register(&adev->common);
+	if (ret) {
+		dev_err(adev->dev, "failed to register dma async device\n");
+		goto err_disable_clks;
+	}
+
+	ret = of_dma_controller_register(pdev->dev.of_node,
+					 of_dma_xlate_by_chan_id,
+					 &adev->common);
+	if (ret)
+		goto err_unregister_dma;
+
+	return 0;
+
+err_unregister_dma:
+	dma_async_device_unregister(&adev->common);
+err_disable_clks:
+	clk_disable_unprepare(adev->iface_clk);
+err_disable_core_clk:
+	clk_disable_unprepare(adev->core_clk);
+
+	return ret;
+}
+
+static int adm_dma_remove(struct platform_device *pdev)
+{
+	struct adm_device *adev = platform_get_drvdata(pdev);
+	struct adm_chan *achan;
+	u32 i;
+
+	of_dma_controller_free(pdev->dev.of_node);
+	dma_async_device_unregister(&adev->common);
+
+	for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+		achan = &adev->channels[i];
+
+		/* mask IRQs for this channel/EE pair */
+		writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+		adm_terminate_all(&adev->channels[i].vc.chan);
+	}
+
+	devm_free_irq(adev->dev, adev->irq, adev);
+
+	clk_disable_unprepare(adev->core_clk);
+	clk_disable_unprepare(adev->iface_clk);
+
+	return 0;
+}
+
+static const struct of_device_id adm_of_match[] = {
+	{ .compatible = "qcom,adm", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, adm_of_match);
+
+static struct platform_driver adm_dma_driver = {
+	.probe = adm_dma_probe,
+	.remove = adm_dma_remove,
+	.driver = {
+		.name = "adm-dma-engine",
+		.of_match_table = adm_of_match,
+	},
+};
+
+module_platform_driver(adm_dma_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
+MODULE_LICENSE("GPL v2");