diff mbox series

[7/9] arm64: dts: qcom: sa8775p-ride: add the second SGMII PHY

Message ID 20230807193507.6488-8-brgl@bgdev.pl
State New
Headers show
Series [1/9] arm64: dts: qcom: sa8775p: add a node for the second serdes PHY | expand

Commit Message

Bartosz Golaszewski Aug. 7, 2023, 7:35 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add a second SGMII PHY that will be used by EMAC1 on sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 55feaac7fa1b..5b48066f312a 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -286,6 +286,14 @@  sgmii_phy0: phy@8 {
 			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
 			reset-deassert-us = <70000>;
 		};
+
+		sgmii_phy1: phy@a {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0xa>;
+			device_type = "ethernet-phy";
+			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+			reset-deassert-us = <70000>;
+		};
 	};
 
 	mtl_rx_setup: rx-queues-config {