diff mbox series

[V1] scsi: ufs: qcom: Align programming sequence as per HW spec

Message ID 20230807155026.28671-1-quic_nitirawa@quicinc.com
State Superseded
Headers show
Series [V1] scsi: ufs: qcom: Align programming sequence as per HW spec | expand

Commit Message

Nitin Rawat Aug. 7, 2023, 3:50 p.m. UTC
Align clock configuration as per Qualcomm UFS controller
hardware specification.

This change updates UFS_SYS1CLK_1US, CORE_CLK_1US_CYCLES,
PA_VS_CORE_CLK_40NS_CYCLES timer configuration for Qunipro
and UTP to align with Qualcomm UFS HW specification.

Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
---
 drivers/ufs/host/ufs-qcom.c | 262 +++++++++++++++++++++++++++---------
 drivers/ufs/host/ufs-qcom.h |  20 ++-
 2 files changed, 215 insertions(+), 67 deletions(-)

--
2.17.1

Comments

Bao D. Nguyen Aug. 8, 2023, 6:14 a.m. UTC | #1
On 8/7/2023 8:50 AM, Nitin Rawat wrote:
> Align clock configuration as per Qualcomm UFS controller
> hardware specification.
> 
> This change updates UFS_SYS1CLK_1US, CORE_CLK_1US_CYCLES,
> PA_VS_CORE_CLK_40NS_CYCLES timer configuration for Qunipro
> and UTP to align with Qualcomm UFS HW specification.
> 
> Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> ---
>   drivers/ufs/host/ufs-qcom.c | 262 +++++++++++++++++++++++++++---------
>   drivers/ufs/host/ufs-qcom.h |  20 ++-
>   2 files changed, 215 insertions(+), 67 deletions(-)
> 
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index e7164ce7336b..836894c112c1 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -91,10 +91,7 @@ struct __ufs_qcom_bw_table {
>   };
> 
>   static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
> -
>   static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
> -static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
> -						       u32 clk_cycles);
> 
>   static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd)
>   {
> @@ -531,8 +528,9 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
>   /*
>    * Return: zero for success and non-zero in case of a failure.
>    */
> -static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
> -			       u32 hs, u32 rate, bool update_link_startup_timer)
> +static int __ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
> +				 u32 hs, u32 rate, bool link_startup,
> +				 bool is_pre_scale_up)
>   {
>   	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>   	struct ufs_clk_info *clki;
> @@ -563,11 +561,16 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>   	/*
>   	 * The Qunipro controller does not use following registers:
>   	 * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG &
> -	 * UFS_REG_PA_LINK_STARTUP_TIMER
> -	 * But UTP controller uses SYS1CLK_1US_REG register for Interrupt
> -	 * Aggregation logic.
> -	*/
> -	if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba))
> +	 * UFS_REG_PA_LINK_STARTUP_TIMER.
> +	 * However UTP controller uses SYS1CLK_1US_REG register for Interrupt
> +	 * Aggregation logic and Auto hibern8 logic.
> +	 * It is mandatory to write SYS1CLK_1US_REG register on UFS host
> +	 * controller V4.0.0 onwards.
> +	 */
> +	if (ufs_qcom_cap_qunipro(host) &&
> +	    !(ufshcd_is_intr_aggr_allowed(hba) ||
> +	    ufshcd_is_auto_hibern8_supported(hba) ||
> +	    host->hw_ver.major >= 4))
>   		return 0;
> 
>   	if (gear == 0) {
> @@ -576,8 +579,14 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>   	}
> 
>   	list_for_each_entry(clki, &hba->clk_list_head, list) {
> -		if (!strcmp(clki->name, "core_clk"))
> -			core_clk_rate = clk_get_rate(clki->clk);
> +		if (!strcmp(clki->name, "core_clk")) {
> +			if (is_pre_scale_up)
> +				core_clk_rate = clki->max_freq;
> +			else
> +				core_clk_rate = clk_get_rate(clki->clk);
> +			break;
> +		}
> +
>   	}
> 
>   	/* If frequency is smaller than 1MHz, set to 1MHz */
> @@ -657,7 +666,7 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>   		mb();
>   	}
> 
> -	if (update_link_startup_timer && host->hw_ver.major != 0x5) {
> +	if (link_startup && host->hw_ver.major != 0x5) {
>   		ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
>   			      REG_UFS_CFG0);
>   		/*
> @@ -670,6 +679,114 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>   	return 0;
>   }
> 
> +static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
> +			       u32 hs, u32 rate, bool link_startup)
Hi Nitin,

How about adding scale_up param to this function ufs_qcom_cfg_timers() 
as below:

static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
			       u32 hs, u32 rate, bool link_startup,
			       bool scale_up)

Then replace all references to __ufs_qcom_cfg_timers() with 
ufs_qcom_cfg_timers()?

It is hard to follow these two almost identical functions with 2 flags 
invoked from different places, so try to get rid of one.

> +{
> +	return  __ufs_qcom_cfg_timers(hba, gear, hs, rate,
> +				      link_startup, false);
> +}
> +
> +static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba,
> +				      u32 clk_1us_cycles,
> +				      u32 clk_40ns_cycles,
> +				      bool scale_up)
> +{
> +	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> +	u32 mask = MAX_CORE_CLK_1US_CYCLES_MASK;
> +	u32 reg, clk_cycles;
Remove the clk_cycles variable and re-use the variable reg?

> +	u32 offset = 0;
> +	int err;
> +
> +	/* Bit mask and offset changed on UFS host controller V4.0.0 onwards */
> +	if (host->hw_ver.major >= 4) {
> +		mask = MAX_CORE_CLK_1US_CYCLES_MASK_V4;
> +		offset = MAX_CORE_CLK_1US_CYCLES_OFFSET_V4;
> +	}
> +
> +	if (clk_1us_cycles > mask)
> +		return -EINVAL;
> +
> +	err = ufshcd_dme_get(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), &reg);
> +	if (err)
> +		return err;
> +
> +	reg &= ~(mask << offset);
> +	reg |= clk_1us_cycles << offset;
> +
> +	if (scale_up)
> +		reg |= CORE_CLK_DIV_EN_BIT;
> +	else
> +		reg &= ~CORE_CLK_DIV_EN_BIT;
> +
> +	err = ufshcd_dme_set(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), reg);
> +	if (err)
> +		return err;
> +
> +	/*
> +	 * UFS host controller V4.0.0 onwards needs to program
> +	 * PA_VS_CORE_CLK_40NS_CYCLES attribute per programmed
> +	 * frequency of unipro core clk of UFS host controller.
> +	 */
> +	if (host->hw_ver.major >= 4) {
> +		if (clk_40ns_cycles > PA_VS_CORE_CLK_40NS_CYCLES_MASK)
> +			return -EINVAL;
> +
> +		err = ufshcd_dme_get(hba,
Nitpicking..You can probably fit all 3 params on 1 line once you replace 
clk_cycles with reg.

> +				     UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES),
> +				     &clk_cycles);
> +		if (err)
> +			return err;
> +
> +		clk_cycles &= ~PA_VS_CORE_CLK_40NS_CYCLES_MASK;
> +		clk_cycles |= clk_40ns_cycles;
> +
> +		err = ufshcd_dme_set(hba,
Same comment as above.

> +				     UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES),
> +				     clk_cycles);
> +	}
> +
> +	return err;
> +}
> +
> +static int ufs_qcom_cfg_core_clk_ctrl(struct ufs_hba *hba)
> +{
> +	struct list_head *head = &hba->clk_list_head;
> +	struct ufs_clk_info *clki;
> +	u32 max_freq = 0;
> +	int err;
> +
> +	list_for_each_entry(clki, head, list) {
> +		if (!IS_ERR_OR_NULL(clki->clk) &&
> +		    (!strcmp(clki->name, "core_clk_unipro"))) {
> +			max_freq = clki->max_freq;
> +			break;
> +		}
> +	}
> +
> +	switch (max_freq) {
> +	case MHZ_403:
> +		err = ufs_qcom_set_core_clk_ctrl(hba, 403, 16, true);
> +		break;
> +	case MHZ_300:
> +		err = ufs_qcom_set_core_clk_ctrl(hba, 300, 12, true);
> +		break;
> +	case MHZ_201_5:
> +		err = ufs_qcom_set_core_clk_ctrl(hba, 202, 8, true);
> +		break;
> +	case MHZ_150:
> +		err = ufs_qcom_set_core_clk_ctrl(hba, 150, 6, true);
> +		break;
> +	case MHZ_100:
> +		err = ufs_qcom_set_core_clk_ctrl(hba, 100, 4, true);
> +		break;
> +	default:
> +		dev_err(hba->dev, "unipro max_freq=%u entry missing\n", max_freq);
> +		err = -EINVAL;
> +		break;
> +	}
> +
> +	return err;
> +}
>   static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
>   					enum ufs_notify_change_status status)
>   {
> @@ -685,13 +802,15 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
>   			return -EINVAL;
>   		}
> 
> -		if (ufs_qcom_cap_qunipro(host))
> -			/*
> -			 * set unipro core clock cycles to 150 & clear clock
> -			 * divider
> -			 */
> -			err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
> -									  150);
> +		if (ufs_qcom_cap_qunipro(host)) {
> +			err = ufs_qcom_cfg_core_clk_ctrl(hba);
> +			if (err) {
> +				dev_err(hba->dev,
> +					"%s cfg core clk ctrl failed\n",
> +					__func__);
> +				return err;
> +			}
> +		}
> 
>   		/*
>   		 * Some UFS devices (and may be host) have issues if LCC is
> @@ -1296,69 +1415,52 @@ static void ufs_qcom_exit(struct ufs_hba *hba)
>   	phy_exit(host->generic_phy);
>   }
> 
> -static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
> -						       u32 clk_cycles)
> +static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
>   {
> -	int err;
> -	u32 core_clk_ctrl_reg;
> -
> -	if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK)
> -		return -EINVAL;
> -
> -	err = ufshcd_dme_get(hba,
> -			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
> -			    &core_clk_ctrl_reg);
> -	if (err)
> -		return err;
> -
> -	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
> -	core_clk_ctrl_reg |= clk_cycles;
> -
> -	/* Clear CORE_CLK_DIV_EN */
> -	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
> +	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> +	struct ufs_pa_layer_attr *attr = &host->dev_req_params;
> +	int err = 0;
> 
> -	return ufshcd_dme_set(hba,
> -			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
> -			    core_clk_ctrl_reg);
> -}
> +	if (!ufs_qcom_cap_qunipro(host))
> +		goto out;
> 
> -static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
> -{
> -	/* nothing to do as of now */
> -	return 0;
> +	if (attr) {
> +		err = __ufs_qcom_cfg_timers(hba, attr->gear_rx,
> +					    attr->pwr_rx, attr->hs_rate,
> +					    false, true);
> +		if (err)
> +			dev_err(hba->dev, "%s ufs cfg timer failed\n",
> +					  __func__);
> +	}
> +	err = ufs_qcom_cfg_core_clk_ctrl(hba);
> +out:
> +	return err;
>   }
> 
>   static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
>   {
> -	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> -
> -	if (!ufs_qcom_cap_qunipro(host))
> -		return 0;
> -
> -	/* set unipro core clock cycles to 150 and clear clock divider */
> -	return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150);
> +	return 0;
>   }
> 
>   static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
>   {
>   	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>   	int err;
> -	u32 core_clk_ctrl_reg;
> +	u32 reg;
> 
>   	if (!ufs_qcom_cap_qunipro(host))
>   		return 0;
> 
> -	err = ufshcd_dme_get(hba,
> -			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
> -			    &core_clk_ctrl_reg);
> +	err = ufshcd_dme_get(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), &reg);
> +	if (err)
> +		return err;
> 
>   	/* make sure CORE_CLK_DIV_EN is cleared */
> -	if (!err &&
> -	    (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) {
> -		core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
> +	if (reg & CORE_CLK_DIV_EN_BIT) {
> +		reg &= ~CORE_CLK_DIV_EN_BIT;
>   		err = ufshcd_dme_set(hba,
>   				    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
> -				    core_clk_ctrl_reg);
> +				    reg);
>   	}
> 
>   	return err;
> @@ -1367,12 +1469,44 @@ static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
>   static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
>   {
>   	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> +	struct ufs_pa_layer_attr *attr = &host->dev_req_params;
> +	struct list_head *head = &hba->clk_list_head;
> +	struct ufs_clk_info *clki;
> +	u32 curr_freq = 0;
> +	int err;
> 
>   	if (!ufs_qcom_cap_qunipro(host))
>   		return 0;
> 
> -	/* set unipro core clock cycles to 75 and clear clock divider */
> -	return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75);
> +	if (attr)
> +		ufs_qcom_cfg_timers(hba, attr->gear_rx, attr->pwr_rx,
> +				    attr->hs_rate, false);
> +
> +	list_for_each_entry(clki, head, list) {
> +		if (!IS_ERR_OR_NULL(clki->clk) &&
> +		    (!strcmp(clki->name, "core_clk_unipro"))) {
> +			curr_freq = clk_get_rate(clki->clk);
> +			break;
> +		}
> +	}
> +
> +	switch (curr_freq) {
> +	case MHZ_37_5:
> +		err = ufs_qcom_set_core_clk_ctrl(hba, 38, 2, false);
> +		break;
> +	case MHZ_75:
> +		err = ufs_qcom_set_core_clk_ctrl(hba, 75, 3, false);
> +		break;
> +	case MHZ_100:
> +		err = ufs_qcom_set_core_clk_ctrl(hba, 100, 4, false);
> +		break;
> +	default:
> +		err = -EINVAL;
> +		dev_err(hba->dev, "unipro curr_freq=%u entry missing\n", curr_freq);
> +		break;
> +	}
> +
> +	return err;
>   }
> 
>   static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
> diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
> index d6f8e74bd538..da7b5ee7c1cf 100644
> --- a/drivers/ufs/host/ufs-qcom.h
> +++ b/drivers/ufs/host/ufs-qcom.h
> @@ -79,6 +79,17 @@ enum {
>   	UFS_MEM_CQIS_VS		= 0x8,
>   };
> 
> +
> +/* QCOM UFS host controller core clk frequencies */
> +#define MHZ_37_5	37500000
> +#define MHZ_50		50000000
> +#define MHZ_75		75000000
> +#define MHZ_100		100000000
> +#define MHZ_150		150000000
> +#define MHZ_300		300000000
> +#define MHZ_201_5	201500000
> +#define MHZ_403		403000000
> +
>   #define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x)	(0x000 + x)
>   #define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x)	(0x400 + x)
> 
> @@ -129,9 +140,12 @@ enum {
>   #define PA_VS_CONFIG_REG1	0x9000
>   #define DME_VS_CORE_CLK_CTRL	0xD002
>   /* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
> -#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT		BIT(8)
> -#define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK	0xFF
> -
> +#define MAX_CORE_CLK_1US_CYCLES_MASK_V4			0xFFF
> +#define MAX_CORE_CLK_1US_CYCLES_OFFSET_V4		0x10
> +#define MAX_CORE_CLK_1US_CYCLES_MASK			0xFF
> +#define CORE_CLK_DIV_EN_BIT				BIT(8)
> +#define PA_VS_CORE_CLK_40NS_CYCLES			0x9007
> +#define PA_VS_CORE_CLK_40NS_CYCLES_MASK			0x3F
Remove the 1 extra tab in between the macro names and their values?

>   static inline void
>   ufs_qcom_get_controller_revision(struct ufs_hba *hba,
>   				 u8 *major, u16 *minor, u16 *step)
> --
> 2.17.1
>
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index e7164ce7336b..836894c112c1 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -91,10 +91,7 @@  struct __ufs_qcom_bw_table {
 };

 static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
-
 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
-static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
-						       u32 clk_cycles);

 static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd)
 {
@@ -531,8 +528,9 @@  static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
 /*
  * Return: zero for success and non-zero in case of a failure.
  */
-static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
-			       u32 hs, u32 rate, bool update_link_startup_timer)
+static int __ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
+				 u32 hs, u32 rate, bool link_startup,
+				 bool is_pre_scale_up)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct ufs_clk_info *clki;
@@ -563,11 +561,16 @@  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
 	/*
 	 * The Qunipro controller does not use following registers:
 	 * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG &
-	 * UFS_REG_PA_LINK_STARTUP_TIMER
-	 * But UTP controller uses SYS1CLK_1US_REG register for Interrupt
-	 * Aggregation logic.
-	*/
-	if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba))
+	 * UFS_REG_PA_LINK_STARTUP_TIMER.
+	 * However UTP controller uses SYS1CLK_1US_REG register for Interrupt
+	 * Aggregation logic and Auto hibern8 logic.
+	 * It is mandatory to write SYS1CLK_1US_REG register on UFS host
+	 * controller V4.0.0 onwards.
+	 */
+	if (ufs_qcom_cap_qunipro(host) &&
+	    !(ufshcd_is_intr_aggr_allowed(hba) ||
+	    ufshcd_is_auto_hibern8_supported(hba) ||
+	    host->hw_ver.major >= 4))
 		return 0;

 	if (gear == 0) {
@@ -576,8 +579,14 @@  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
 	}

 	list_for_each_entry(clki, &hba->clk_list_head, list) {
-		if (!strcmp(clki->name, "core_clk"))
-			core_clk_rate = clk_get_rate(clki->clk);
+		if (!strcmp(clki->name, "core_clk")) {
+			if (is_pre_scale_up)
+				core_clk_rate = clki->max_freq;
+			else
+				core_clk_rate = clk_get_rate(clki->clk);
+			break;
+		}
+
 	}

 	/* If frequency is smaller than 1MHz, set to 1MHz */
@@ -657,7 +666,7 @@  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
 		mb();
 	}

-	if (update_link_startup_timer && host->hw_ver.major != 0x5) {
+	if (link_startup && host->hw_ver.major != 0x5) {
 		ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
 			      REG_UFS_CFG0);
 		/*
@@ -670,6 +679,114 @@  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
 	return 0;
 }

+static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
+			       u32 hs, u32 rate, bool link_startup)
+{
+	return  __ufs_qcom_cfg_timers(hba, gear, hs, rate,
+				      link_startup, false);
+}
+
+static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba,
+				      u32 clk_1us_cycles,
+				      u32 clk_40ns_cycles,
+				      bool scale_up)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	u32 mask = MAX_CORE_CLK_1US_CYCLES_MASK;
+	u32 reg, clk_cycles;
+	u32 offset = 0;
+	int err;
+
+	/* Bit mask and offset changed on UFS host controller V4.0.0 onwards */
+	if (host->hw_ver.major >= 4) {
+		mask = MAX_CORE_CLK_1US_CYCLES_MASK_V4;
+		offset = MAX_CORE_CLK_1US_CYCLES_OFFSET_V4;
+	}
+
+	if (clk_1us_cycles > mask)
+		return -EINVAL;
+
+	err = ufshcd_dme_get(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), &reg);
+	if (err)
+		return err;
+
+	reg &= ~(mask << offset);
+	reg |= clk_1us_cycles << offset;
+
+	if (scale_up)
+		reg |= CORE_CLK_DIV_EN_BIT;
+	else
+		reg &= ~CORE_CLK_DIV_EN_BIT;
+
+	err = ufshcd_dme_set(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), reg);
+	if (err)
+		return err;
+
+	/*
+	 * UFS host controller V4.0.0 onwards needs to program
+	 * PA_VS_CORE_CLK_40NS_CYCLES attribute per programmed
+	 * frequency of unipro core clk of UFS host controller.
+	 */
+	if (host->hw_ver.major >= 4) {
+		if (clk_40ns_cycles > PA_VS_CORE_CLK_40NS_CYCLES_MASK)
+			return -EINVAL;
+
+		err = ufshcd_dme_get(hba,
+				     UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES),
+				     &clk_cycles);
+		if (err)
+			return err;
+
+		clk_cycles &= ~PA_VS_CORE_CLK_40NS_CYCLES_MASK;
+		clk_cycles |= clk_40ns_cycles;
+
+		err = ufshcd_dme_set(hba,
+				     UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES),
+				     clk_cycles);
+	}
+
+	return err;
+}
+
+static int ufs_qcom_cfg_core_clk_ctrl(struct ufs_hba *hba)
+{
+	struct list_head *head = &hba->clk_list_head;
+	struct ufs_clk_info *clki;
+	u32 max_freq = 0;
+	int err;
+
+	list_for_each_entry(clki, head, list) {
+		if (!IS_ERR_OR_NULL(clki->clk) &&
+		    (!strcmp(clki->name, "core_clk_unipro"))) {
+			max_freq = clki->max_freq;
+			break;
+		}
+	}
+
+	switch (max_freq) {
+	case MHZ_403:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 403, 16, true);
+		break;
+	case MHZ_300:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 300, 12, true);
+		break;
+	case MHZ_201_5:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 202, 8, true);
+		break;
+	case MHZ_150:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 150, 6, true);
+		break;
+	case MHZ_100:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 100, 4, true);
+		break;
+	default:
+		dev_err(hba->dev, "unipro max_freq=%u entry missing\n", max_freq);
+		err = -EINVAL;
+		break;
+	}
+
+	return err;
+}
 static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 					enum ufs_notify_change_status status)
 {
@@ -685,13 +802,15 @@  static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 			return -EINVAL;
 		}

-		if (ufs_qcom_cap_qunipro(host))
-			/*
-			 * set unipro core clock cycles to 150 & clear clock
-			 * divider
-			 */
-			err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
-									  150);
+		if (ufs_qcom_cap_qunipro(host)) {
+			err = ufs_qcom_cfg_core_clk_ctrl(hba);
+			if (err) {
+				dev_err(hba->dev,
+					"%s cfg core clk ctrl failed\n",
+					__func__);
+				return err;
+			}
+		}

 		/*
 		 * Some UFS devices (and may be host) have issues if LCC is
@@ -1296,69 +1415,52 @@  static void ufs_qcom_exit(struct ufs_hba *hba)
 	phy_exit(host->generic_phy);
 }

-static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
-						       u32 clk_cycles)
+static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
 {
-	int err;
-	u32 core_clk_ctrl_reg;
-
-	if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK)
-		return -EINVAL;
-
-	err = ufshcd_dme_get(hba,
-			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
-			    &core_clk_ctrl_reg);
-	if (err)
-		return err;
-
-	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
-	core_clk_ctrl_reg |= clk_cycles;
-
-	/* Clear CORE_CLK_DIV_EN */
-	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	struct ufs_pa_layer_attr *attr = &host->dev_req_params;
+	int err = 0;

-	return ufshcd_dme_set(hba,
-			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
-			    core_clk_ctrl_reg);
-}
+	if (!ufs_qcom_cap_qunipro(host))
+		goto out;

-static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
-{
-	/* nothing to do as of now */
-	return 0;
+	if (attr) {
+		err = __ufs_qcom_cfg_timers(hba, attr->gear_rx,
+					    attr->pwr_rx, attr->hs_rate,
+					    false, true);
+		if (err)
+			dev_err(hba->dev, "%s ufs cfg timer failed\n",
+					  __func__);
+	}
+	err = ufs_qcom_cfg_core_clk_ctrl(hba);
+out:
+	return err;
 }

 static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
 {
-	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-
-	if (!ufs_qcom_cap_qunipro(host))
-		return 0;
-
-	/* set unipro core clock cycles to 150 and clear clock divider */
-	return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150);
+	return 0;
 }

 static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	int err;
-	u32 core_clk_ctrl_reg;
+	u32 reg;

 	if (!ufs_qcom_cap_qunipro(host))
 		return 0;

-	err = ufshcd_dme_get(hba,
-			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
-			    &core_clk_ctrl_reg);
+	err = ufshcd_dme_get(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), &reg);
+	if (err)
+		return err;

 	/* make sure CORE_CLK_DIV_EN is cleared */
-	if (!err &&
-	    (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) {
-		core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+	if (reg & CORE_CLK_DIV_EN_BIT) {
+		reg &= ~CORE_CLK_DIV_EN_BIT;
 		err = ufshcd_dme_set(hba,
 				    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
-				    core_clk_ctrl_reg);
+				    reg);
 	}

 	return err;
@@ -1367,12 +1469,44 @@  static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
 static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	struct ufs_pa_layer_attr *attr = &host->dev_req_params;
+	struct list_head *head = &hba->clk_list_head;
+	struct ufs_clk_info *clki;
+	u32 curr_freq = 0;
+	int err;

 	if (!ufs_qcom_cap_qunipro(host))
 		return 0;

-	/* set unipro core clock cycles to 75 and clear clock divider */
-	return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75);
+	if (attr)
+		ufs_qcom_cfg_timers(hba, attr->gear_rx, attr->pwr_rx,
+				    attr->hs_rate, false);
+
+	list_for_each_entry(clki, head, list) {
+		if (!IS_ERR_OR_NULL(clki->clk) &&
+		    (!strcmp(clki->name, "core_clk_unipro"))) {
+			curr_freq = clk_get_rate(clki->clk);
+			break;
+		}
+	}
+
+	switch (curr_freq) {
+	case MHZ_37_5:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 38, 2, false);
+		break;
+	case MHZ_75:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 75, 3, false);
+		break;
+	case MHZ_100:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 100, 4, false);
+		break;
+	default:
+		err = -EINVAL;
+		dev_err(hba->dev, "unipro curr_freq=%u entry missing\n", curr_freq);
+		break;
+	}
+
+	return err;
 }

 static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index d6f8e74bd538..da7b5ee7c1cf 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -79,6 +79,17 @@  enum {
 	UFS_MEM_CQIS_VS		= 0x8,
 };

+
+/* QCOM UFS host controller core clk frequencies */
+#define MHZ_37_5	37500000
+#define MHZ_50		50000000
+#define MHZ_75		75000000
+#define MHZ_100		100000000
+#define MHZ_150		150000000
+#define MHZ_300		300000000
+#define MHZ_201_5	201500000
+#define MHZ_403		403000000
+
 #define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x)	(0x000 + x)
 #define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x)	(0x400 + x)

@@ -129,9 +140,12 @@  enum {
 #define PA_VS_CONFIG_REG1	0x9000
 #define DME_VS_CORE_CLK_CTRL	0xD002
 /* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
-#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT		BIT(8)
-#define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK	0xFF
-
+#define MAX_CORE_CLK_1US_CYCLES_MASK_V4			0xFFF
+#define MAX_CORE_CLK_1US_CYCLES_OFFSET_V4		0x10
+#define MAX_CORE_CLK_1US_CYCLES_MASK			0xFF
+#define CORE_CLK_DIV_EN_BIT				BIT(8)
+#define PA_VS_CORE_CLK_40NS_CYCLES			0x9007
+#define PA_VS_CORE_CLK_40NS_CYCLES_MASK			0x3F
 static inline void
 ufs_qcom_get_controller_revision(struct ufs_hba *hba,
 				 u8 *major, u16 *minor, u16 *step)