diff mbox series

[3/6] serial: stm32: modify parameter and rename stm32_usart_rx_dma_enabled

Message ID 20230803130134.155355-4-valentin.caron@foss.st.com
State Superseded
Headers show
Series serial: stm32: improve DMA pause and resume | expand

Commit Message

Valentin Caron Aug. 3, 2023, 1:01 p.m. UTC 
Rename stm32_usart_rx_dma_enabled to stm32_usart_rx_dma_started in order
to match with stm32_usart_tx_dma_started.

Modify argument of stm32_usart_rx_dma_started from uart_port structure to
stm32_port structure to match with stm32_usart_tx_dma_started.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
---
 drivers/tty/serial/stm32-usart.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index a1585aa1ceb0..3471e23bb02f 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -289,9 +289,9 @@  static int stm32_usart_init_rs485(struct uart_port *port,
 	return uart_get_rs485_mode(port);
 }
 
-static bool stm32_usart_rx_dma_enabled(struct uart_port *port)
+static bool stm32_usart_rx_dma_started(struct stm32_port *stm32_port)
 {
-	struct stm32_port *stm32_port = to_stm32_port(port);
+	struct uart_port *port = &stm32_port->port;
 	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
 
 	if (!stm32_port->rx_ch)
@@ -310,7 +310,7 @@  static bool stm32_usart_pending_rx_pio(struct uart_port *port, u32 *sr)
 	/* Get pending characters in RDR or FIFO */
 	if (*sr & USART_SR_RXNE) {
 		/* Get all pending characters from the RDR or the FIFO when using interrupts */
-		if (!stm32_usart_rx_dma_enabled(port))
+		if (!stm32_usart_rx_dma_started(stm32_port))
 			return true;
 
 		/* Handle only RX data errors when using DMA */
@@ -455,7 +455,7 @@  static unsigned int stm32_usart_receive_chars(struct uart_port *port, bool force
 	u32 sr;
 	unsigned int size = 0;
 
-	if (stm32_usart_rx_dma_enabled(port) || force_dma_flush) {
+	if (stm32_usart_rx_dma_started(stm32_port) || force_dma_flush) {
 		rx_dma_status = dmaengine_tx_status(stm32_port->rx_ch,
 						    stm32_port->rx_ch->cookie,
 						    &stm32_port->rx_dma_state);
@@ -789,8 +789,8 @@  static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 	 * line has been masked by HW and rx data are stacking in FIFO.
 	 */
 	if (!stm32_port->throttled) {
-		if (((sr & USART_SR_RXNE) && !stm32_usart_rx_dma_enabled(port)) ||
-		    ((sr & USART_SR_ERR_MASK) && stm32_usart_rx_dma_enabled(port))) {
+		if (((sr & USART_SR_RXNE) && !stm32_usart_rx_dma_started(stm32_port)) ||
+		    ((sr & USART_SR_ERR_MASK) && stm32_usart_rx_dma_started(stm32_port))) {
 			spin_lock(&port->lock);
 			size = stm32_usart_receive_chars(port, false);
 			uart_unlock_and_check_sysrq(port);
@@ -806,7 +806,7 @@  static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 	}
 
 	/* Receiver timeout irq for DMA RX */
-	if (stm32_usart_rx_dma_enabled(port) && !stm32_port->throttled) {
+	if (stm32_usart_rx_dma_started(stm32_port) && !stm32_port->throttled) {
 		spin_lock(&port->lock);
 		size = stm32_usart_receive_chars(port, false);
 		uart_unlock_and_check_sysrq(port);
@@ -906,7 +906,7 @@  static void stm32_usart_throttle(struct uart_port *port)
 	 * Disable DMA request line if enabled, so the RX data gets queued into the FIFO.
 	 * Hardware flow control is triggered when RX FIFO is full.
 	 */
-	if (stm32_usart_rx_dma_enabled(port))
+	if (stm32_usart_rx_dma_started(stm32_port))
 		stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR);
 
 	stm32_usart_clr_bits(port, ofs->cr1, stm32_port->cr1_irq);