diff mbox series

[v4,2/3] dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module

Message ID 20230731053712.2220898-3-quic_fenglinw@quicinc.com
State Superseded
Headers show
Series [v4,1/3] input: pm8xxx-vib: refactor to easily support new SPMI vibrator | expand

Commit Message

Fenglin Wu July 31, 2023, 5:37 a.m. UTC
Add compatible string 'qcom,spmi-vib-gen2' to support vibrator module
inside PMI632, PMI7250B, PM7325B, PM7550BA.

Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 .../bindings/input/qcom,pm8xxx-vib.yaml          | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

Comments

Rob Herring Aug. 11, 2023, 5:41 p.m. UTC | #1
On Mon, 31 Jul 2023 13:37:07 +0800, Fenglin Wu wrote:
> Add compatible string 'qcom,spmi-vib-gen2' to support vibrator module
> inside PMI632, PMI7250B, PM7325B, PM7550BA.
> 
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
>  .../bindings/input/qcom,pm8xxx-vib.yaml          | 16 ++++++++++++----
>  1 file changed, 12 insertions(+), 4 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
Krzysztof Kozlowski Aug. 14, 2023, 10:06 a.m. UTC | #2
On 31/07/2023 07:37, Fenglin Wu wrote:
> Add compatible string 'qcom,spmi-vib-gen2' to support vibrator module
> inside PMI632, PMI7250B, PM7325B, PM7550BA.
> 
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
>  .../bindings/input/qcom,pm8xxx-vib.yaml          | 16 ++++++++++++----
>  1 file changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
> index c8832cd0d7da..4a2319fc1e3f 100644
> --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
> +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
> @@ -11,10 +11,18 @@ maintainers:
>  
>  properties:
>    compatible:
> -    enum:
> -      - qcom,pm8058-vib
> -      - qcom,pm8916-vib
> -      - qcom,pm8921-vib
> +    oneOf:
> +      - enum:
> +          - qcom,pm8058-vib
> +          - qcom,pm8916-vib
> +          - qcom,pm8921-vib
> +      - items:
> +          - enum:
> +              - qcom,pmi632-vib
> +              - qcom,pm7250b-vib
> +              - qcom,pm7325b-vib
> +              - qcom,pm7550b-vib
> +          - const: qcom,spmi-vib-gen2

This does not seem to implement my comment:

"Entirely remove qcom,spmi-vib-gen2 and
qcom,spmi-vib-gen1.

Use device specific compatibles names only. As fallback and as first
compatible."

It's nice to respond that you disagree with it. Therefore, I am not
going to Ack it.

Best regards,
Krzysztof
Fenglin Wu Aug. 15, 2023, 2:20 a.m. UTC | #3
On 8/14/2023 6:06 PM, Krzysztof Kozlowski wrote:
> On 31/07/2023 07:37, Fenglin Wu wrote:
>> Add compatible string 'qcom,spmi-vib-gen2' to support vibrator module
>> inside PMI632, PMI7250B, PM7325B, PM7550BA.
>>
>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>> ---
>>   .../bindings/input/qcom,pm8xxx-vib.yaml          | 16 ++++++++++++----
>>   1 file changed, 12 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
>> index c8832cd0d7da..4a2319fc1e3f 100644
>> --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
>> +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
>> @@ -11,10 +11,18 @@ maintainers:
>>   
>>   properties:
>>     compatible:
>> -    enum:
>> -      - qcom,pm8058-vib
>> -      - qcom,pm8916-vib
>> -      - qcom,pm8921-vib
>> +    oneOf:
>> +      - enum:
>> +          - qcom,pm8058-vib
>> +          - qcom,pm8916-vib
>> +          - qcom,pm8921-vib
>> +      - items:
>> +          - enum:
>> +              - qcom,pmi632-vib
>> +              - qcom,pm7250b-vib
>> +              - qcom,pm7325b-vib
>> +              - qcom,pm7550b-vib
>> +          - const: qcom,spmi-vib-gen2
> 
> This does not seem to implement my comment:
> 
> "Entirely remove qcom,spmi-vib-gen2 and
> qcom,spmi-vib-gen1.
> 
> Use device specific compatibles names only. As fallback and as first
> compatible."
> 
> It's nice to respond that you disagree with it. Therefore, I am not
> going to Ack it.

I saw your comments and I replied your later comments in v2: 
https://lore.kernel.org/linux-arm-msm/b5e58172-beb5-0be3-834f-3f1db3e8b3b3@quicinc.com/. 
It might not be a good place to follow the discussion though, I am 
pasting my last reply below:

'Sorry, I forgot to mention, in v3, I added the 'reg' value to the
register offset and no longer hard code the 16-bit register address,
that makes the vibrators inside PMI632/PM7250B/PM7325B/PM7550BA all
compatible, and that was another motivation of adding a generic
compatible string and make the others as the fallback.

This will be still the case in v4, I might keep it similar in v3 but
just drop "qcom,spmi-vib-gen1" '

Anyway, if this is still not a good reason to add a generic compatible 
string, I can revert it back to use device specific compatible string 
only in next patch.

Thanks

> 
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Aug. 15, 2023, 5:10 a.m. UTC | #4
On 15/08/2023 04:20, Fenglin Wu wrote:
> 
> 
> On 8/14/2023 6:06 PM, Krzysztof Kozlowski wrote:
>> On 31/07/2023 07:37, Fenglin Wu wrote:
>>> Add compatible string 'qcom,spmi-vib-gen2' to support vibrator module
>>> inside PMI632, PMI7250B, PM7325B, PM7550BA.
>>>
>>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>>> ---
>>>   .../bindings/input/qcom,pm8xxx-vib.yaml          | 16 ++++++++++++----
>>>   1 file changed, 12 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
>>> index c8832cd0d7da..4a2319fc1e3f 100644
>>> --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
>>> +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
>>> @@ -11,10 +11,18 @@ maintainers:
>>>   
>>>   properties:
>>>     compatible:
>>> -    enum:
>>> -      - qcom,pm8058-vib
>>> -      - qcom,pm8916-vib
>>> -      - qcom,pm8921-vib
>>> +    oneOf:
>>> +      - enum:
>>> +          - qcom,pm8058-vib
>>> +          - qcom,pm8916-vib
>>> +          - qcom,pm8921-vib
>>> +      - items:
>>> +          - enum:
>>> +              - qcom,pmi632-vib
>>> +              - qcom,pm7250b-vib
>>> +              - qcom,pm7325b-vib
>>> +              - qcom,pm7550b-vib
>>> +          - const: qcom,spmi-vib-gen2
>>
>> This does not seem to implement my comment:
>>
>> "Entirely remove qcom,spmi-vib-gen2 and
>> qcom,spmi-vib-gen1.
>>
>> Use device specific compatibles names only. As fallback and as first
>> compatible."
>>
>> It's nice to respond that you disagree with it. Therefore, I am not
>> going to Ack it.
> 
> I saw your comments and I replied your later comments in v2: 
> https://lore.kernel.org/linux-arm-msm/b5e58172-beb5-0be3-834f-3f1db3e8b3b3@quicinc.com/. 
> It might not be a good place to follow the discussion though, I am 
> pasting my last reply below:
> 
> 'Sorry, I forgot to mention, in v3, I added the 'reg' value to the
> register offset and no longer hard code the 16-bit register address,
> that makes the vibrators inside PMI632/PM7250B/PM7325B/PM7550BA all
> compatible, and that was another motivation of adding a generic
> compatible string and make the others as the fallback.
> 
> This will be still the case in v4, I might keep it similar in v3 but
> just drop "qcom,spmi-vib-gen1" '
> 
> Anyway, if this is still not a good reason to add a generic compatible 
> string, I can revert it back to use device specific compatible string 
> only in next patch.

I just don't see how this argument is anyhow related to what I said. I
did not comment on removing the fallback. I said use specific compatible
as fallback.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
index c8832cd0d7da..4a2319fc1e3f 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
@@ -11,10 +11,18 @@  maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8058-vib
-      - qcom,pm8916-vib
-      - qcom,pm8921-vib
+    oneOf:
+      - enum:
+          - qcom,pm8058-vib
+          - qcom,pm8916-vib
+          - qcom,pm8921-vib
+      - items:
+          - enum:
+              - qcom,pmi632-vib
+              - qcom,pm7250b-vib
+              - qcom,pm7325b-vib
+              - qcom,pm7550b-vib
+          - const: qcom,spmi-vib-gen2
 
   reg:
     maxItems: 1