@@ -1198,8 +1198,8 @@ gcc: clock-controller@100000 {
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>,
- <&pcie0_lane>,
- <&pcie1_lane>;
+ <&pcie0_phy>,
+ <&pcie1_phy>;
clock-names = "bi_tcxo",
"bi_tcxo_ao",
"sleep_clk",
@@ -2371,7 +2371,7 @@ pcie0: pci@1c00000 {
power-domains = <&gcc PCIE_0_GDSC>;
- phys = <&pcie0_lane>;
+ phys = <&pcie0_phy>;
phy-names = "pciephy";
status = "disabled";
@@ -2379,15 +2379,22 @@ pcie0: pci@1c00000 {
pcie0_phy: phy@1c06000 {
compatible = "qcom,sdm845-qmp-pcie-phy";
- reg = <0 0x01c06000 0 0x18c>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c06000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_CLKREF_CLK>,
- <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
@@ -2396,19 +2403,6 @@ pcie0_phy: phy@1c06000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie0_lane: phy@1c06200 {
- reg = <0 0x01c06200 0 0x128>,
- <0 0x01c06400 0 0x1fc>,
- <0 0x01c06800 0 0x218>,
- <0 0x01c06600 0 0x70>;
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- #phy-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk";
- };
};
pcie1: pci@1c08000 {
@@ -2481,7 +2475,7 @@ pcie1: pci@1c08000 {
power-domains = <&gcc PCIE_1_GDSC>;
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
status = "disabled";
@@ -2489,15 +2483,22 @@ pcie1: pci@1c08000 {
pcie1_phy: phy@1c0a000 {
compatible = "qcom,sdm845-qhp-pcie-phy";
- reg = <0 0x01c0a000 0 0x800>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c0a000 0 0x2000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_CLKREF_CLK>,
- <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -2506,18 +2507,6 @@ pcie1_phy: phy@1c0a000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy@1c06200 {
- reg = <0 0x01c0a800 0 0x800>,
- <0 0x01c0a800 0 0x800>,
- <0 0x01c0b800 0 0x400>;
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- #phy-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
- };
};
mem_noc: interconnect@1380000 {
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 71 ++++++++++++---------------- 1 file changed, 30 insertions(+), 41 deletions(-)