@@ -1975,7 +1975,7 @@ wcnss_iris: iris {
};
smd-edge {
- interrupts = <GIC_SPI 142 1>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs1_mbox 8 17>;
qcom,smd-edge = <6>;
qcom,remote-pid = <4>;
@@ -439,7 +439,7 @@ apps_smsm: apps@0 {
hexagon_smsm: hexagon@1 {
reg = <1>;
- interrupts = <0 290 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -456,7 +456,7 @@ usb3: usb@f92f8800 {
usb@f9200000 {
compatible = "snps,dwc3";
reg = <0xf9200000 0xcc00>;
- interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
maximum-speed = "high-speed";
@@ -589,7 +589,7 @@ smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
- interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 10>;
@@ -1264,7 +1264,7 @@ gpu: gpu@b00000 {
reg = <0x00b00000 0x3f000>;
reg-names = "kgsl_3d0_reg_memory";
- interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mmcc GPU_GX_GFX3D_CLK>,
<&mmcc GPU_AHB_CLK>,
@@ -3047,7 +3047,7 @@ usb3: usb@6af8800 {
usb3_dwc3: usb@6a00000 {
compatible = "snps,dwc3";
reg = <0x06a00000 0xcc00>;
- interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy1>, <&ssusb_phy_0>;
phy-names = "usb2-phy", "usb3-phy";
snps,hird-threshold = /bits/ 8 <0>;
@@ -3405,7 +3405,7 @@ usb2: usb@76f8800 {
usb2_dwc3: usb@7600000 {
compatible = "snps,dwc3";
reg = <0x07600000 0xcc00>;
- interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy2>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
@@ -3419,7 +3419,7 @@ slimbam: dma-controller@9184000 {
qcom,controlled-remotely;
reg = <0x09184000 0x32000>;
num-channels = <31>;
- interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <1>;
qcom,num-ees = <2>;
@@ -3428,7 +3428,7 @@ slimbam: dma-controller@9184000 {
slim_msm: slim-ngd@91c0000 {
compatible = "qcom,slim-ngd-v1.5.0";
reg = <0x091c0000 0x2c000>;
- interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&slimbam 3>, <&slimbam 4>;
dma-names = "rx", "tx";
#address-cells = <1>;
@@ -1484,7 +1484,7 @@ adreno_gpu: gpu@5000000 {
"rbcpr",
"core";
- interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&adreno_smmu 0>;
operating-points-v2 = <&gpu_opp_table>;
power-domains = <&rpmpd MSM8998_VDDMX>;
@@ -1034,7 +1034,7 @@ adreno_gpu: gpu@5000000 {
reg = <0x05000000 0x40000>;
reg-names = "kgsl_3d0_reg_memory";
- interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
<&gpucc GPUCC_RBBMTIMER_CLK>,
@@ -2290,50 +2290,50 @@ timer@17920000 {
frame@17921000 {
frame-number = <0>;
- interrupts = <0 8 0x4>,
- <0 7 0x4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17921000 0x1000>,
<0x17922000 0x1000>;
};
frame@17923000 {
frame-number = <1>;
- interrupts = <0 9 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17923000 0x1000>;
status = "disabled";
};
frame@17924000 {
frame-number = <2>;
- interrupts = <0 10 0x4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17924000 0x1000>;
status = "disabled";
};
frame@17925000 {
frame-number = <3>;
- interrupts = <0 11 0x4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17925000 0x1000>;
status = "disabled";
};
frame@17926000 {
frame-number = <4>;
- interrupts = <0 12 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17926000 0x1000>;
status = "disabled";
};
frame@17927000 {
frame-number = <5>;
- interrupts = <0 13 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17927000 0x1000>;
status = "disabled";
};
frame@17928000 {
frame-number = <6>;
- interrupts = <0 14 0x4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17928000 0x1000>;
status = "disabled";
};
@@ -440,7 +440,7 @@ touchscreen@38 {
reg = <0x38>;
wakeup-source;
interrupt-parent = <&tlmm>;
- interrupts = <125 0x2>;
+ interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&vreg_l28a_3p0>;
vcc-i2c-supply = <&vreg_l14a_1p88>;
Replace hard-coded interrupt parts (GIC, flags) with standard defines for readability. No changes in resulting DTBs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes in v2: 1. Replace defines in few more files (msm8976.dtsi, msm8994.dtsi, msm8996.dtsi, msm8998.dtsi, one more in sdm630.dtsi, sdm845-shift-axolotl.dts) --- arch/arm64/boot/dts/qcom/msm8939.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8976.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8994.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 ++++++------ arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +- arch/arm64/boot/dts/qcom/sdm630.dtsi | 18 +++++++++--------- .../boot/dts/qcom/sdm845-shift-axolotl.dts | 2 +- 7 files changed, 20 insertions(+), 20 deletions(-)