diff mbox series

ARM: dts: qcom: ipq8064: move keys and leds out of soc node

Message ID 20230726210152.273161-1-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series ARM: dts: qcom: ipq8064: move keys and leds out of soc node | expand

Commit Message

Krzysztof Kozlowski July 26, 2023, 9:01 p.m. UTC 
GPIO keys and LEDs are not part of the SoC, so move them to top-level to
fix dtbs_check warnings like:

  qcom-ipq8064-rb3011.dtb: soc: gpio-keys: {'compatible': ['gpio-keys'], ... should not be valid under {'type': 'object'}
        from schema $id: http://devicetree.org/schemas/simple-bus.yaml#

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts |  55 ++++----
 arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi | 122 +++++++++---------
 2 files changed, 88 insertions(+), 89 deletions(-)

Comments

Konrad Dybcio July 27, 2023, 4:30 p.m. UTC | #1 
On 26.07.2023 23:01, Krzysztof Kozlowski wrote:
> GPIO keys and LEDs are not part of the SoC, so move them to top-level to
> fix dtbs_check warnings like:
> 
>   qcom-ipq8064-rb3011.dtb: soc: gpio-keys: {'compatible': ['gpio-keys'], ... should not be valid under {'type': 'object'}
>         from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
index 1796ded31d17..12e806adcda8 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
@@ -20,6 +20,33 @@  chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&buttons_pins>;
+		pinctrl-names = "default";
+
+		button {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led-0 {
+			label = "rb3011:green:user";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
 	memory@42000000 {
 		reg = <0x42000000 0x3e000000>;
 		device_type = "memory";
@@ -302,34 +329,6 @@  partition@0 {
 				};
 			};
 		};
-
-		gpio-keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&buttons_pins>;
-			pinctrl-names = "default";
-
-			button {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-			led-0 {
-				label = "rb3011:green:user";
-				color = <LED_COLOR_ID_GREEN>;
-				gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
index 17f65e140e02..49de9752632f 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
@@ -14,6 +14,67 @@  chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&buttons_pins>;
+		pinctrl-names = "default";
+
+		button-1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+		button-2 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led-0 {
+			label = "led_usb1";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbdev";
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "led_usb3";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbdev";
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "status_led_fail";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			label = "sata_led";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			label = "status_led_pass";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
 	soc {
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
@@ -64,66 +125,5 @@  sata@29000000 {
 			ports-implemented = <0x1>;
 			status = "okay";
 		};
-
-		gpio-keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&buttons_pins>;
-			pinctrl-names = "default";
-
-			button-1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-			button-2 {
-				label = "wps";
-				linux,code = <KEY_WPS_BUTTON>;
-				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-			led-0 {
-				label = "led_usb1";
-				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "usbdev";
-				default-state = "off";
-			};
-
-			led-1 {
-				label = "led_usb3";
-				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "usbdev";
-				default-state = "off";
-			};
-
-			led-2 {
-				label = "status_led_fail";
-				function = LED_FUNCTION_STATUS;
-				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led-3 {
-				label = "sata_led";
-				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led-4 {
-				label = "status_led_pass";
-				function = LED_FUNCTION_STATUS;
-				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
 	};
 };