diff mbox series

[3/3] regulator: dt-bindings: active-semi,act8846: correct supplies

Message ID 20230725124629.150113-3-krzysztof.kozlowski@linaro.org
State New
Headers show
Series [1/3] regulator: dt-bindings: dlg,da9121: add buck2 constraints | expand

Commit Message

Krzysztof Kozlowski July 25, 2023, 12:46 p.m. UTC
Regulator supplies are per-device, not per regulator, so they are
expected to be present in device node.  Moving them to proper place
allows to simplify a lot, because now none of the regulators differ.

This also fixes dtbs_check warnings like:

  rk3368-evb-act8846.dtb: act8846@5a: 'inl1-supply', 'inl2-supply', 'inl3-supply', 'vp1-supply',
    'vp2-supply', 'vp3-supply', 'vp4-supply' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../regulator/active-semi,act8846.yaml        | 82 +++++--------------
 1 file changed, 22 insertions(+), 60 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
index 3725348bb235..02f45b5834d0 100644
--- a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
@@ -28,75 +28,37 @@  properties:
       the VSEL pin is assumed to be low.
     type: boolean
 
+  inl1-supply:
+    description: Handle to the INL1 input supply (REG5-7)
+
+  inl2-supply:
+    description: Handle to the INL2 input supply (REG8-9)
+
+  inl3-supply:
+    description: Handle to the INL3 input supply (REG10-12)
+
+  vp1-supply:
+    description: Handle to the VP1 input supply (REG1)
+
+  vp2-supply:
+    description: Handle to the VP2 input supply (REG2)
+
+  vp3-supply:
+    description: Handle to the VP3 input supply (REG3)
+
+  vp4-supply:
+    description: Handle to the VP4 input supply (REG4)
+
   regulators:
     type: object
     additionalProperties: false
 
-    properties:
-      REG1:
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          vp1-supply:
-            description: Handle to the VP1 input supply
-
-      REG2:
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          vp2-supply:
-            description: Handle to the VP2 input supply
-
-      REG3:
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          vp3-supply:
-            description: Handle to the VP3 input supply
-
-      REG4:
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          vp4-supply:
-            description: Handle to the VP4 input supply
-
     patternProperties:
-      "^REG[5-7]$":
+      "^REG([1-9]|1[0-2])$":
         type: object
         $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
-        properties:
-          inl1-supply:
-            description: Handle to the INL1 input supply
-
-      "^REG[8-9]$":
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          inl2-supply:
-            description: Handle to the INL2 input supply
-
-      "^REG1[0-2]$":
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          inl3-supply:
-            description: Handle to the INL3 input supply
-
 additionalProperties: false
 
 required: