| Message ID | 20230725142616.157405-2-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | a02913e886351f039b9d5346be7926c1b05a3eef |
| Headers | show |
| Series | None | expand |
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi index bf10a3d29fca..80db778c9684 100644 --- a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi @@ -26,5 +26,5 @@ &sdio_pwrseq { }; &vcc3v3_btreg { - enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts index d759478e1c84..165d09ccb942 100644 --- a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts @@ -39,5 +39,5 @@ &sdio_pwrseq { }; &vcc3v3_btreg { - enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; };
The recommended name for enable GPIOs property in regulator-gpio is enable-gpios. This is also required by bindings: px30-engicam-px30-core-ctouch2.dtb: vcc3v3-btreg: Unevaluated properties are not allowed ('enable-gpio' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi | 2 +- .../arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)