diff mbox series

[v4,4/5] arm64: dts: qcom: ipq5332: Add thermal zone nodes

Message ID 20230719104041.126718-5-quic_ipkumar@quicinc.com
State Superseded
Headers show
Series Add IPQ5332 TSENS support | expand

Commit Message

Praveenkumar I July 19, 2023, 10:40 a.m. UTC 
This patch adds thermal zone nodes for sensors present in
IPQ5332.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
---
[v4]:
	No changes.
[v3]:
	Pick up R-b tag
[v2]:
	Added passive trips and alignment change.

 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 78 +++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 026f99fda00c..fe9f0fdd44ee 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -480,4 +480,82 @@  timer {
 			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	thermal-zones {
+		rfa-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				rfa-0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		rfa-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				rfa-1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		misc-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				misc-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				cpu-top-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top-glue-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };