@@ -69,6 +69,17 @@ static struct tsens_features ipq8074_feat = {
.trip_max_temp = 204000,
};
+static struct tsens_features ipq5332_feat = {
+ .ver_major = VER_2_X_NO_RPM,
+ .crit_int = 1,
+ .combo_int = 1,
+ .adc = 0,
+ .srot_split = 1,
+ .max_sensors = 16,
+ .trip_min_temp = 0,
+ .trip_max_temp = 204000,
+};
+
static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
/* ----- SROT ------ */
/* VERSION */
@@ -270,6 +281,20 @@ struct tsens_plat_data data_ipq8074 = {
.fields = tsens_v2_regfields,
};
+static const struct tsens_ops ops_ipq5332 = {
+ .init = init_tsens_v2_no_rpm,
+ .get_temp = get_temp_tsens_valid,
+ .calibrate = tsens_v2_calibration,
+};
+
+struct tsens_plat_data data_ipq5332 = {
+ .num_sensors = 5,
+ .ops = &ops_ipq5332,
+ .hw_ids = (unsigned int []){11, 12, 13, 14, 15},
+ .feat = &ipq5332_feat,
+ .fields = tsens_v2_regfields,
+};
+
/* Kept around for backward compatibility with old msm8996.dtsi */
struct tsens_plat_data data_8996 = {
.num_sensors = 13,
@@ -1106,6 +1106,9 @@ static const struct of_device_id tsens_table[] = {
}, {
.compatible = "qcom,ipq8074-tsens",
.data = &data_ipq8074,
+ }, {
+ .compatible = "qcom,ipq5332-tsens",
+ .data = &data_ipq5332,
}, {
.compatible = "qcom,mdm9607-tsens",
.data = &data_9607,
@@ -648,6 +648,6 @@ extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8
extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
/* TSENS v2 targets */
-extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
+extern struct tsens_plat_data data_8996, data_ipq8074, data_ipq5332, data_tsens_v2;
#endif /* __QCOM_TSENS_H__ */
IPQ5332 uses tsens v2.3.3 IP and it is having combined interrupt. It does not have RPM and kernel needs to take care of sensor enablement, calibration. Hence introduced new feature_config, ops and data for IPQ5332. Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> --- [v5]: No changes. [v4]: No changes. [v3]: No changes. [v2]: Added tsens_features for ipq5332 with VER_2_X_NO_RPM. Used hw_ids to mention the available sensors. Dropped v2 in ops_ipq5332. drivers/thermal/qcom/tsens-v2.c | 25 +++++++++++++++++++++++++ drivers/thermal/qcom/tsens.c | 3 +++ drivers/thermal/qcom/tsens.h | 2 +- 3 files changed, 29 insertions(+), 1 deletion(-)