diff mbox series

[v2,8/8] media: i2c: ds90ub960: Rename RXPORT_MODE_CSI2_ASYNC to RXPORT_MODE_CSI2_NONSYNC

Message ID 20230720-fpdlink-additions-v2-8-b91b1eca2ad3@ideasonboard.com
State Superseded
Headers show
Series media: i2c: ds90ub9xx: Misc improvements | expand

Commit Message

Tomi Valkeinen July 20, 2023, 10:30 a.m. UTC
FPD-Link has an operating mode that used to be called "asynchronous" in
the hardware documentation, but that has been changed to non-synchronous
already quite a while back. The ub960 driver still had one instance of
the old naming, so let's rename it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
 drivers/media/i2c/ds90ub960.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

Comments

Laurent Pinchart July 25, 2023, 4:45 p.m. UTC | #1
Hi Tomi,

Thank you for the patch.

On Thu, Jul 20, 2023 at 01:30:39PM +0300, Tomi Valkeinen wrote:
> FPD-Link has an operating mode that used to be called "asynchronous" in
> the hardware documentation, but that has been changed to non-synchronous
> already quite a while back. The ub960 driver still had one instance of
> the old naming, so let's rename it.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/media/i2c/ds90ub960.c | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
> index ea819fb6e99b..2ed4d4763a02 100644
> --- a/drivers/media/i2c/ds90ub960.c
> +++ b/drivers/media/i2c/ds90ub960.c
> @@ -415,8 +415,8 @@ enum ub960_rxport_mode {
>  	RXPORT_MODE_RAW12_HF = 1,
>  	RXPORT_MODE_RAW12_LF = 2,
>  	RXPORT_MODE_CSI2_SYNC = 3,
> -	RXPORT_MODE_CSI2_ASYNC = 4,
> -	RXPORT_MODE_LAST = RXPORT_MODE_CSI2_ASYNC,
> +	RXPORT_MODE_CSI2_NONSYNC = 4,
> +	RXPORT_MODE_LAST = RXPORT_MODE_CSI2_NONSYNC,
>  };
>  
>  enum ub960_rxport_cdr {
> @@ -1609,7 +1609,7 @@ static unsigned long ub960_calc_bc_clk_rate_ub960(struct ub960_data *priv,
>  		div = 1;
>  		break;
>  
> -	case RXPORT_MODE_CSI2_ASYNC:
> +	case RXPORT_MODE_CSI2_NONSYNC:
>  		mult = 2;
>  		div = 5;
>  		break;
> @@ -1633,7 +1633,7 @@ static unsigned long ub960_calc_bc_clk_rate_ub9702(struct ub960_data *priv,
>  	case RXPORT_MODE_CSI2_SYNC:
>  		return 47187500;
>  
> -	case RXPORT_MODE_CSI2_ASYNC:
> +	case RXPORT_MODE_CSI2_NONSYNC:
>  		return 9437500;
>  
>  	default:
> @@ -1840,7 +1840,7 @@ static void ub960_init_rx_port_ub960(struct ub960_data *priv,
>  		bc_freq_val = 0;
>  		break;
>  
> -	case RXPORT_MODE_CSI2_ASYNC:
> +	case RXPORT_MODE_CSI2_NONSYNC:
>  		bc_freq_val = 2;
>  		break;
>  
> @@ -1878,7 +1878,7 @@ static void ub960_init_rx_port_ub960(struct ub960_data *priv,
>  		return;
>  
>  	case RXPORT_MODE_CSI2_SYNC:
> -	case RXPORT_MODE_CSI2_ASYNC:
> +	case RXPORT_MODE_CSI2_NONSYNC:
>  		/* CSI-2 Mode (DS90UB953-Q1 compatible) */
>  		ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG, 0x3,
>  					 0x0);
> @@ -1938,7 +1938,7 @@ static void ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv,
>  		fpd_func_mode = 2;
>  		break;
>  
> -	case RXPORT_MODE_CSI2_ASYNC:
> +	case RXPORT_MODE_CSI2_NONSYNC:
>  		bc_freq_val = 2;
>  		fpd_func_mode = 2;
>  		break;
> @@ -2032,7 +2032,7 @@ static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv,
>  		bc_freq_val = 6;
>  		break;
>  
> -	case RXPORT_MODE_CSI2_ASYNC:
> +	case RXPORT_MODE_CSI2_NONSYNC:
>  		bc_freq_val = 2;
>  		break;
>  
> @@ -2098,7 +2098,7 @@ static void ub960_init_rx_port_ub9702(struct ub960_data *priv,
>  		return;
>  
>  	case RXPORT_MODE_CSI2_SYNC:
> -	case RXPORT_MODE_CSI2_ASYNC:
> +	case RXPORT_MODE_CSI2_NONSYNC:
>  
>  		break;
>  	}
> @@ -2444,7 +2444,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv,
>  
>  		/* For the rest, we are only interested in parallel busses */
>  		if (rxport->rx_mode == RXPORT_MODE_CSI2_SYNC ||
> -		    rxport->rx_mode == RXPORT_MODE_CSI2_ASYNC)
> +		    rxport->rx_mode == RXPORT_MODE_CSI2_NONSYNC)
>  			continue;
>  
>  		if (rx_data[nport].num_streams > 2)
> @@ -2508,7 +2508,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv,
>  			break;
>  
>  		case RXPORT_MODE_CSI2_SYNC:
> -		case RXPORT_MODE_CSI2_ASYNC:
> +		case RXPORT_MODE_CSI2_NONSYNC:
>  			if (!priv->hw_data->is_ub9702) {
>  				/* Map all VCs from this port to the same VC */
>  				ub960_rxport_write(priv, nport, UB960_RR_CSI_VC_MAP,
>
diff mbox series

Patch

diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index ea819fb6e99b..2ed4d4763a02 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -415,8 +415,8 @@  enum ub960_rxport_mode {
 	RXPORT_MODE_RAW12_HF = 1,
 	RXPORT_MODE_RAW12_LF = 2,
 	RXPORT_MODE_CSI2_SYNC = 3,
-	RXPORT_MODE_CSI2_ASYNC = 4,
-	RXPORT_MODE_LAST = RXPORT_MODE_CSI2_ASYNC,
+	RXPORT_MODE_CSI2_NONSYNC = 4,
+	RXPORT_MODE_LAST = RXPORT_MODE_CSI2_NONSYNC,
 };
 
 enum ub960_rxport_cdr {
@@ -1609,7 +1609,7 @@  static unsigned long ub960_calc_bc_clk_rate_ub960(struct ub960_data *priv,
 		div = 1;
 		break;
 
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		mult = 2;
 		div = 5;
 		break;
@@ -1633,7 +1633,7 @@  static unsigned long ub960_calc_bc_clk_rate_ub9702(struct ub960_data *priv,
 	case RXPORT_MODE_CSI2_SYNC:
 		return 47187500;
 
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		return 9437500;
 
 	default:
@@ -1840,7 +1840,7 @@  static void ub960_init_rx_port_ub960(struct ub960_data *priv,
 		bc_freq_val = 0;
 		break;
 
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		bc_freq_val = 2;
 		break;
 
@@ -1878,7 +1878,7 @@  static void ub960_init_rx_port_ub960(struct ub960_data *priv,
 		return;
 
 	case RXPORT_MODE_CSI2_SYNC:
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		/* CSI-2 Mode (DS90UB953-Q1 compatible) */
 		ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG, 0x3,
 					 0x0);
@@ -1938,7 +1938,7 @@  static void ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv,
 		fpd_func_mode = 2;
 		break;
 
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		bc_freq_val = 2;
 		fpd_func_mode = 2;
 		break;
@@ -2032,7 +2032,7 @@  static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv,
 		bc_freq_val = 6;
 		break;
 
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 		bc_freq_val = 2;
 		break;
 
@@ -2098,7 +2098,7 @@  static void ub960_init_rx_port_ub9702(struct ub960_data *priv,
 		return;
 
 	case RXPORT_MODE_CSI2_SYNC:
-	case RXPORT_MODE_CSI2_ASYNC:
+	case RXPORT_MODE_CSI2_NONSYNC:
 
 		break;
 	}
@@ -2444,7 +2444,7 @@  static int ub960_configure_ports_for_streaming(struct ub960_data *priv,
 
 		/* For the rest, we are only interested in parallel busses */
 		if (rxport->rx_mode == RXPORT_MODE_CSI2_SYNC ||
-		    rxport->rx_mode == RXPORT_MODE_CSI2_ASYNC)
+		    rxport->rx_mode == RXPORT_MODE_CSI2_NONSYNC)
 			continue;
 
 		if (rx_data[nport].num_streams > 2)
@@ -2508,7 +2508,7 @@  static int ub960_configure_ports_for_streaming(struct ub960_data *priv,
 			break;
 
 		case RXPORT_MODE_CSI2_SYNC:
-		case RXPORT_MODE_CSI2_ASYNC:
+		case RXPORT_MODE_CSI2_NONSYNC:
 			if (!priv->hw_data->is_ub9702) {
 				/* Map all VCs from this port to the same VC */
 				ub960_rxport_write(priv, nport, UB960_RR_CSI_VC_MAP,