diff mbox series

[v2,05/15] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC

Message ID 20230720054100.9940-6-manivannan.sadhasivam@linaro.org
State Superseded
Headers show
Series [v2,01/15] dt-bindings: ufs: common: add OPP table | expand

Commit Message

Manivannan Sadhasivam July 20, 2023, 5:40 a.m. UTC 
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

UFS host controller, when scaling gears, should choose appropriate
performance state of RPMh power domain controller along with clock
frequency. So let's add the OPP table support to specify both clock
frequency and RPMh performance states replacing the old "freq-table-hz"
property.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[mani: Splitted pd change and used rpmhpd_opp_low_svs]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 41 +++++++++++++++++++++-------
 1 file changed, 31 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 89520a9fe1e3..e04a3cbb1017 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2605,18 +2605,39 @@  ufs_mem_hc: ufshc@1d84000 {
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
 				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-			freq-table-hz =
-				<50000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 150000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
 
+			operating-points-v2 = <&ufs_opp_table>;
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {